2010 Alfa Romeo 8C ESP

149
6
IN AN EMERGENCY
CAUTION
Do not exceed the speed limit
of 110 Km/h (65 miles/h). Have the
tyre checked as soon as possible at
an Authorised Service Centre of the
Manufacturer’s Network.
CAUTION
The sealant may be noxious or
irritating. Do not swallow and avoid
contact with the skin and eyes. In the
event of contact, rinse with abundant
water.
Consult a doctor in case of an allergic
reaction. Keep the sealant out of
children’s reach. Dispose of the empty
sealant bottle at an Authorised Service
Centre of the Manufacturer’s Network.
WARNING: Replace the bottle of sealant before
the expiry date at an Authorised Service Centre
of the Manufacturer’s Network. WARNING: The sealant contained in the bottle
of the Fix&Go kit may damage the sensor fitted
inside the wheel rim on vehicles equipped with
the tyre pressure monitoring system. In such
cases, the sensor must always be replaced
by an Authorised Service Centre of the
Manufacturer’s Network.
IF AN EXTERIOR
LIGHT GOES OUTWARNING: Before replacing a light bulb, make
sure that the corresponding fuse is in proper
working condition. For replacement, use only
genuine new light bulbs having the same
characteristics as the bulb to be replaced.

153
6
A
BC
IN AN EMERGENCY
IF AN INTERIOR
LIGHT GOES OUTWARNING: Before replacing a light bulb,
make sure that the corresponding fuse is in
proper working order. For replacement, use
only genuine new light bulbs having the same
characteristics as the bulb to be replaced.
FRONT DOME LIGHT
To replace the bulbs:
1) Gently prise with a screwdriver
A and
remove the dome light.
2) Replace the bulb:
- timed light
B (12V - 10W cartridge lamp)
- reading light C (12V - 3W).3) Refi t the cover inserting fi rst the left part
and then pressing the right part into seat.
WARNING: When refitting the dome light,
make sure that the electric wires are correctly
positioned and do not interfere with the dome
light edges and with the retaining tabs.

156
6
M
4) Refi t the bulb holder
L inserting fi rst the
electrical connector side and then pressing
on the other side to hook up the clip. IF A FUSE BLOWS
Replacing the fuses
When an electrical device ceases to work, check
that the corresponding fuse is in proper working
order.
A - Fuse intact.B - Fuse blownReplace the faulty fuse with a new one featuring
the same rating (same colour).
If the problem persists, contact an Authorised
Service Centre of the Manufacturer’s
Network.
CAUTION
Never replace a blown fuse
with anything other than a sound fuse
(same rating/colour).
A
B

169
6
IN AN EMERGENCY
CAUTION
The fluid contained in the
battery is poisonous and corrosive.
Avoid contact with the skin and eyes.
The battery recharging procedure
must be carried out in a ventilated
environment away from open flames
or possible sources of sparks: risk of
explosion and fire!
IF YOU HAVE
TO JACK UP THE
VEHICLE
If you need to jack up the vehicle, position the
rubber bushings in correspondence to the arrows.

176
7
FUELOnly use unleaded premium fuel with an octane
number (R.O.N.) of no less than 95.
Tank capacity: approx. 86 litres, including a 14
litre reserve.WARNING: The anti-pollution devices of the
vehicle require unleaded fuel to be used at
all times. Under no circumstance, not even in
emergency situations, should leaded fuel be
supplied to the fuel tank, not even a minimum
quantity. You would irreparably damage the
catalytic muffler.
WARNING: An inefficient catalytic muffler results
in noxious exhaust emissions which are harmful
for the environment.
ENGINE OILTo check the level, please consult the
“Maintenance” section.
Do not top up with oil having characteristics other
than those of the oil already used.
The gap between the MIN and MAX reference
marks on the dipstick corresponds to about 1.5
litres of oil.
Use SAE 5W/40 API SL/CF and ACEA A3, B3,
B4 oil for fuel-powered engines.

180
7
TECHNICAL SPECIFICATIONSENGINEGeneral
Type code AR8C
Cycle Otto
Cylinder number and position V 8 - 90°
Number of valves per cylinder 4
Bore and stroke mm 94x84.5
Total displacement cm3 4,691
Compression ratio 11.25±0.2
Maximum power (EC) kW 331
HP 450
corresponding RPM RPM 7,000
Maximum torque (EC) Nm 480
kgm 49
corresponding RPM RPM 4,750INJECTION – IGNITION
The ignition and injection system is controlled by
a single microprocessor ECU.
Injection
- Type Bosch Motronic ME7.1.1.
Ignition
- Static ignition
- Ignition sequence: 1-8-6-2-7-3-4-5
- Ignition coil:
ELDOR 78407003.C00
- Spark plugs: NGK PMR8C-H.
Battery
EXIDE 12V 88Ah 580A
Electric alternator
NIPPONDENSO SC2 150A

190
8
SCHEDULED
MAINTENANCECorrect maintenance is clearly the best way
to maintain vehicle performance and safety
features, ensure respect for the environment and
low operating costs.WARNING: Also remember that the scrupulous
observance of the maintenance procedures is
essential for the validity of the warranty.For this reason, Alfa Romeo has provided for
a series of checks and maintenance operations
involving the 1
st service when the vehicle
mileage reaches 5,000 km or after 6 months of
the vehicle life, and subsequently every 10,000
km or every year. AFTER THE 11
TH SERVICE
After the 11
th service, scheduled maintenance is
restarted with the same operations performed for
the 1
st, 2nd, 3rd Services
WARNING: The Scheduled Maintenance services
are prescribed by the Manufacturer. Failure to
have the services carried out invalidates the
warranty.
Scheduled Maintenance Services are
provided by all Authorised Service Centres
of the Manufacturer’s Network. In the
event that, when a service is performed,
further replacements or repairs are found to
be necessary in addition to the scheduled
operations, these can be carried out only with
the specific consent of the Customer. WARNING: We advise you to immediately
report to an Authorised Service Centre of the
Manufacturer’s Network any small operating
failures and not to wait for the next service.The Maintenance Schedule is contained in the
“Warranty and Maintenance Schedule” book.

194
8
A
MAXMIN
ENGINE OIL
The level must be checked when the engine is
warm, following the procedure below:
- start the vehicle and warm it up until the
temperature stabilises;
- turn off the engine, remove the fi ller cap
A
and wait 5 minutes to allow the oil to fl ow
into the sump;
- measure the level and top up if necessary.
The oil level must be between the MIN and MAX
notches on the dipstick.
The interval between MIN and MAX corresponds
to approximately 1.5 litres of oil.
WARNING: Do not exceed the MAX level!
If the oil level is close to or below the MIN notch,
add oil through the filler neck
A positioned next
to the dipstick until reaching the MAX notch. The
oil level must never exceed the MAX reference
notch.
WARNING: Do not top up with oil having
characteristics other than those of the oil already
used in the engine.After topping up or replacing the oil, check its
level once again.
WARNING: The engine oil used and the oil filter
changed contain substances that are dangerous
for the environment. To replace the oil and
filters, we advise you to contact an Authorised
Service Centre of the Manufacturer’s
Network where all the necessary equipment is
available to dispose of the used oil and filters in
compliance with applicable legislation and in an
environment-friendly manner.