The driver’s and f ront passenger’s
seats have active head restraints. If
the vehicle is struck severely f rom
the rear, the occupant properly
secured with the seat belt will be
pushed against the seat-back and the
head restraint will automatically
move forward.
This reduces the distance between
the restraint and the occupant’s head.
It also helps protect the occupantsagainst whiplash and injuries to the
neck and upper spine.
Af ter a collision, the activated
restraint should return to its normal
position.
For a head restraint system to work
properly:
Do not hang any items on the head
restraints, or f rom the restraint
legs.
Do not place any object between
an occupant and the seat-back.
Install each restraint in its proper
location.
If the restraints do not return to their
normal position, or in the event of a
severe collision, have the vehicle
inspected by an Acura dealer.
Only use genuine Acura
replacement head restraints.
A ct ive Head Rest raint s
Seats
Inst rument s and Cont rols
137
2010 TSX
The component parts in the engine
compartment are protected by
several covers. You may need to
remove the covers when you
perf orm some simple maintenance
work.
To remove the covers:Remove the holding clip(s).
Remove the right and lef t engine
compartment covers by pulling up.
Pull the bulkhead cover straight
up to remove.
Af ter replacing the right engine
compartment cover, make sure the
washer f luid cap is f irmly in place.
When reinstalling the covers, make
sure the pins and tabs are in their
proper positions, and put the holding
clip(s) back in place securely. 1.
2.
3.
Engine Compartment Covers
6-cylinder models only
414
RIGHT ENGINE COMPARTMENT COVER
BULKHEAD COVER LEFT ENGINE COMPARTMENT COVER
2010 TSX
