2010.5 Citroen C5 DAG steering
[x] Cancel search: steeringPage 168 of 336
IX
147
D R I V I N G
FIXED CENTRED CONTROLS STEERING WHEEL
1
Rotation - S c r o l l t h e v a r i o u s p a g e s o f i n f o r m a t i o n o n t h
e i n s t r u m e n t p a n e l
screen.
- Move through the various menus on the instrume nt panel screen.
- Increase/decrease values.
S h o r t p r e s s
- Open the menu on the instrument panel screen (only when stationary).
- S e l e c t a n d c o n fi r m i n f o r m a t i o n .
Long press Trip computer zero reset (if the trip computer page is displayed).
2 S h o r t p r e s s - Cancel the current operation.
- Return to the previous screen on the instrumen
t panel screen.
Long press Return to the initial page on the ins trument panel screen.
3 S h o r t p r e s s Increase the speed in steps of 1 mph (1 km/h)/stor ing the speed.
Maintained press Increase the speed in steps of 5 mph (5 km/h).
4 S h o r t p r e s s Decrease the speed in steps of 1 mph (1 km/h)/stor ing the speed.
Maintained press Decrease the speed in steps of 5 mph (5 km/h).
5 S h o r t p r e s s S u s p e n d o r r e s u m e c r u i s e c o n t r o l / s p e e d l i m i t e r ( d e
p e n d i n g o n t h e
mode selected).
6 S h o r t p r e s s S e l e c t c r u i s e c o n t r o l o r s p e e d l i m i t e r m o d e ( t h e c
y c l e o n t h i s b u t t o n
will always begin with selection of the speed limit er).
7 S h o r t p r e s s Deactivate cruise control/speed limiter.
8 S h o r t p r e s s - Pick up an incoming call.
- Hang up the current call.
- Open the telephone short-cut menu.
- C o n fi r m o n t h e l i s t a n d t h e t e l e p h o n e m e n u .
Long press Refuse an incoming call.
9 S h o r t p r e s s / L o n g p r e s s Horn.
10 S h o r t p r e s s Activate/deactivate Black Panel mode (night drivin g).
11 S h o r t p r e s s Activate the voice command.
Long press Navigation instruction repeat.
Page 170 of 336
IX
149
D R I V I N G
SPEED LIMITER
S y s t e m w h i c h p r e v e n t s t h e v e h i -
c l e f r o m e x c e e d i n g t h e s p e e d p r o -
grammed by the driver.
When the limit speed is reached, the
accelerator pedal no longer has any
effect.
The speed limiter is switched
on manually: a speed of at least
2 0 m p h ( a p p r o x . 3 0 k m / h ) m u s t b e
programmed.
The speed limiter can in no way re-
place respect for speed limits or vigi-
lance and responsibility on the part
of the driver.
Steering mounted controls
The speed limiter switches are lo-
cated on the left-hand side of the
steering wheel. Displays on the instrument
panel
The speed limiter information is dis-
played in zone
A of the instrument
panel.
Programming
Press on button 4 to select speed
limiter mode " LIMIT ".
T h e s e l e c t i o n i s c o n fi r m e d b y t h e
display of the function in zone A of
the instrument panel. Activation
Press on button 3 when the de-
s i r e d m a x i m u m s p e e d i s d i s -
played.
The information "ON" then appears
in zone A .
When the function is selected, the
last memorised speed and the infor-
mation "PAUSE" are displayed.
With the engine running, you can
a d j u s t t h e m e m o r i s e d m a x i m u m
speed, displayed in zone A , by
pressing on:
Button 1 to increase the memo-
r i s e d m a x i m u m s p e e d .
Button 2 to decrease the memo-
r i s e d m a x i m u m s p e e d . S u c c e s s i v e p r e s s e s w i l l m o d i f y t h e
m a x i m u m s p e e d i n s t e p s o f 1 m p h
and a continuous press in steps of
5 mph.
Page 172 of 336
IX
151
D R I V I N G
CRUISE CONTROL
S y s t e m w h i c h a u t o m a t i c a l l y m a i n -
tains the vehicle speed programmed
by the driver, without any action on
the accelerator pedal.
The cruise control is switched on
manually: the vehicle speed must be
at least 25 mph (40 km/h) and you
must be in at least:
- 4 t h g e a r f o r m a n u a l g e a r b o x e s ,
- 2 n d g e a r f o r a u t o m a t i c g e a r b o x e s . Displays on the instrument
panel
The programmed information is
grouped together in zone
A of the
instrument panel.
Programming
Press button 4 to select cruise
control mode " CRUISE ".
Steering mounted controls
The cruise control switches are lo-
cated on the left-hand side of the
steering wheel. T h e s e l e c t i o n i s c o n fi r m e d b y t h e
display of the function in zone
A of
the instrument panel.
When the function is selected, no
cruising speed has yet been
memorised . Once the desired speed has been
reached using the accelerator, press
button
1 or button 2 . The cruising
speed is then memorised and cruise
control is activated. The cruising
speed is displayed in zone A of the
instrument panel, and "ON" is dis-
played.
Adjustment of the memorised
speed while cruise control is
in operation
You can adjust the memorised speed, displayed in zone A , by pressing:
- Button 1 to increase the speed.
- Button 2 to reduce the speed.
S u c c e s s i v e p r e s s e s w i l l m o d i f y t h e
cruise speed in steps of 1 mph and a
continuous press in steps of 5 mph.
You can then release the accelera-
tor pedal. The vehicle will automati-
cally keep to the speed chosen.
The vehicle speed may vary slightly
from that memorised.
If during cruise control the system
cannot keep to the cruise speed
(e.g. on a steep descent), then the
s p e e d fl a s h e s . I f n e c e s s a r y , b r a k e t o
curb your speed.
Page 185 of 336
X
164
C H E C K S
PETROL ENGINES
The various caps and covers allow
a c c e s s f o r c h e c k i n g fl u i d l e v e l s a n d
for replacing certain components.
1. Screenwash and headlamp wash
reservoir.
2. P o w e r s t e e r i n g fl u i d r e s e r v o i r o r
power steering and suspension
fl u i d r e s e r v o i r .
3. Engine coolant header tank.
4. Engine oil dipstick.
5. E n g i n e o i l fi l l e r c a p .
6. B r a k e fl u i d r e s e r v o i r .
7. Battery.
8. A i r fi l t e r .
1.6i THP
1.8i 16V
Page 186 of 336
X
!
1 6 5
C H E C K S
V e h i c l e s fi t t e d w i t h t h e 2.0i
16v e n g i n e m a y b e fi t t e d
with metal suspension. In this
case, a different power steering
fl u i d r e s e r v o i r i s fi t t e d .
2.0i 16V
1. Screenwash and headlamp wash
reservoir.
2. P o w e r s t e e r i n g fl u i d r e s e r v o i r o r
power steering and suspension
fl u i d r e s e r v o i r .
3. Engine coolant header tank.
4. Engine oil dipstick.
5. E n g i n e o i l fi l l e r c a p .
6. B r a k e fl u i d r e s e r v o i r .
7. Battery.
8. A i r fi l t e r .
Page 187 of 336
X
!
166
C H E C K S
DIESEL ENGINES
The various caps and covers allow
a c c e s s f o r c h e c k i n g fl u i d l e v e l s , f o r
replacing certain components and
for priming the fuel system.
1. Screenwash and headlamp wash
reservoir.
2. P o w e r s t e e r i n g fl u i d r e s e r v o i r o r
power steering and suspension
fl u i d r e s e r v o i r , d e p e n d i n g o n
equipment.
3. Engine coolant header tank.
4. Engine oil dipstick.
5. E n g i n e o i l fi l l e r c a p .
6. A i r fi l t e r .
7. B r a k e fl u i d r e s e r v o i r .
8. Battery.
As the Diesel fuel system op-
erates under high pressure,
any work on the fuel system
is prohibited.
V e h i c l e s fi t t e d w i t h t h e HDi 140 en-
g i n e m a y b e fi t t e d w i t h m e t a l s p r i n g s .
In this case, a different power steer-
i n g fl u i d r e s e r v o i r i s fi t t e d .
HDi 110
HDi 140
Page 188 of 336
X!
167
C H E C K S
HDi 160 - V6 HDi 240 engines
(with particle filter)
1. Screenwash and headlamp wash
reservoir.
2. Power steering and suspension
fl u i d r e s e r v o i r .
3. Engine coolant reservoir.
4. Engine oil dipstick.
5. E n g i n e o i l fi l l e r c a p .
6. A i r fi l t e r .
7. B r a k e fl u i d r e s e r v o i r .
8. Battery.
9. "+" and "-" terminals for starting
with a slave battery.
As the Diesel fuel system op-
erates under high pressure:
- Any work on the fuel system is prohibited.
- HDi engines make use of ad- vanced technology.
All maintenance and repairs re-
q u i r e s p e c i a l q u a l i fi c a t i o n s w h i c h
only a CITROËN dealer can guar-
antee.
HDi 160
V6 HDi 240
Page 189 of 336
X!
168
C H E C K S
Check all of these levels regularly
and top them up if necessary, unless
otherwise indicated.
I f a l e v e l d r o p s s i g n i fi c a n t l y , h a v e t h e
corresponding system checked by a
CITROËN dealer.
Oil level Oil change
Refer to the Maintenance and
Warranty Guide for details of the in-
terval for this operation.
O i l s p e c i fi c a t i o n
The oil must correspond to your en-
gine and conform to the manufac-
turer's recommendations. Brake fluid level
Fluid change
Refer to the Maintenance and
Warranty Guide for details of the in-
terval for this operation.
T h i s fl u i d m u s t b e c h a n g e d r e g u l a r -
ly. Fluid which has been used exces-
sively may cause a loss of braking
e f fi c i e n c y .
F l u i d s p e c i fi c a t i o n
T h e b r a k e fl u i d m u s t c o n f o r m t o t h e
manufacturer's recommendations
and meet the DOT4 standard.
The reading will only be
correct if the vehicle is on
level ground and the engine
has been off for more than
1 5 m i n u t e s .
The check is carried out either when
the ignition is switched on using the
oil level indicator on the instrument
panel, or using the dipstick.
Check this level also between each
scheduled service and before long
journeys.
Take care when doing anything un-
der the bonnet, as some parts of the
engine can be extremely hot (risk of
burns). T h e b r a k e fl u i d l e v e l s h o u l d
be close to the "MAX" mark.
If it is not, check the brake
pad wear.
In order to maintain the reli-
ability of the engine and emis-
sion control system, the use
of additives in the engine oil is
prohibited. Power steering fluid or power
steering and suspension
fluid level
T h i s fl u i d m u s t b e t o p p e d u p
by a CITROËN dealer.
Dipstick
There are 2 marks on the
dipstick:
-
A = max; never exceed
this level,
- B = min; top up the
l e v e l v i a t h e o i l fi l l e r
cap, using the type
of oil suited to your
engine.