8
i
!
Practical information
91
1.12 V compressor with integral pressure gauge, to measure and adjust the tyre
pressure.
Composition of the kit
2.Sealant car tridge for the temporary repair
of a tyre.3.Injection pipe. 4.Suction pipe, to remove the sealant product
if necessary.
5.Sachet containing a replacement valve core, a tool for removing/refitting the valve core and a speed restriction sticker.
The speed restriction sticker must beaffixed to the vehicle's steering wheel toremind you that a wheel is in temporary use.
Do not exceed a speed of 50 mph(80 km/h) when driving with a tyre repaired using this type of kit.
Refi tting the rear seat cushion
)Put the metal cover back into place. )Refit the four "butterfly" screws. )Insert the metal hooks into the seat backrest. )Fold the seat cushion down until it locks
in place.
When refitting the cushion, take care not to trap the seat belt buckles.