2010.5 Citroen C CROSSER display
[x] Cancel search: displayPage 15 of 217
I
M O N I T O R I N G
31
SERVICE INDICATOR Resetting the service indicator to zero
Your CITROËN dealer carries out this
operation after each service.
If you have carried out your vehicle's
s e r v i c e y o u r s e l f , t h e z e r o r e s e t p r o c e -
dure is the following:
switch off the ignition.
press the INFO button several times
in succession until the service indi-
cator is displayed.
press and hold the INFO button for
a few seconds until the spanner
fl a s h e s .
press the INFO button while the
s p a n n e r i s fl a s h i n g t o c h a n g e t h e d i s -
play "---" to "CLEAR" then the time
remaining before the next service is
due is displayed.
Service overdue
Operation
W h e n t h e i g n i t i o n i s s w i t c h e d o n , y o u
must press the INFO button several
times in succession until the service
indicator is displayed. The distance re-
corder display line indicates the number
of miles (kilometres) remaining and the
time elapsed line indicates the number
of months remaining before the next
service is due.
After a certain distance and a certain
t i m e , t h e d i s p l a y o f "---" is reinitialised
and the display indicates the time
remaining before the next service is
due.
System which informs the driver when
the next service is due in accordance
with the manufacturer's servicing
schedule.
The point at which the next service is
due is calculated from the last service
indicator zero reset.
It is determined by two parameters:
- t h e d i s t a n c e t r a v e l l e d ( i n m i l e s ( k m ) ) ,
- the time elapsed since the last service
(in months).
The distance remaining to be travelled
m a y b e w e i g h t e d b y t h e t i m e f a c t o r ,
depending on the user's driving habits.
Example: the display indicates that
7 300 miles (kilometres) remain before
the next service is due.
The symbol "--" remains displayed
u n t i l t h e fi r s t s e r v i c e o f a n e w v e h i c l e
has been carried out.
Example: the display indicates that the
service is overdue. This service must
be carried out by a CITROËN dealer.
E a c h t i m e t h e i g n i t i o n i s s w i t c h e d o n ,
the display
"
PERIODIC INSPECTION
"
is displayed for a few seconds to
indicate that the service must be carried
out without delay.
Page 16 of 217
I
M O N I T O R I N G
32
TRIP COMPUTER A v e r a g e f u e l consumption(l/100 km or km/lor mpg)
This is the average fuel
consumption since the
last zero reset.
T h i s fi g u r e m a y c h a n g e f o l l o w i n g a
change in the style of driving or the
relief resulting in a change in the
current fuel consumption.
Average speed(km/h or mph)
This is the average
speed calculated since
the last zero reset.
R e s e t t i n g t h e i n f o r m a t i o n t o z e r o
W h e n t h e i g n i t i o n i s s w i t c h e d o n , t h e
zero reset switches automatically from
manual mode to automatic mode.
If dashes "---" are displayed for long
periods in place of the digits while
d r i v i n g , c o n t a c t a C I T R O Ë N d e a l e r .
C u r r e n t f u e l consumption(l/100 km or km/lor mpg)
This is the average fuel
consumption during the last
few seconds of driving.
I n f o r m a t i o n d i s p l a y
W i t h t h e i g n i t i o n o n , p r e s s t h e INFO
b u t t o n o n t h e d a s h b o a r d , t o t h e r i g h t
o f t h e i n s t r u m e n t p a n e l , s e v e r a l t i m e s
in succession to display the different
information:
- a v e r a g e f u e l c o n s u m p t i o n ,
- a v e r a g e s p e e d ,
- current fuel consumption. W h e n t h e r e q u i r e d i n f o r m a t i o n i s
d i s p l a y e d , p r e s s t h e
INFO button for
more than two seconds to reset all of
the information to zero.
Automatic
If the ignition key remains in the OFF
p o s i t i o n f o r m o r e t h a n 4 h o u r s , t h e i n -
formation is reset to zero automatically.
Page 17 of 217
I
!
M O N I T O R I N G
33
When the vehicle is
s t a t i o n a r y , i t a l l o w s
the user to change the
following settings:
- resetting average fuel consumption
a n d a v e r a g e s p e e d ,
- t h e f u e l c o n s u m p t i o n u n i t s ,
- t h e t e m p e r a t u r e d i s p l a y u n i t s ,
- t h e d i s p l a y l a n g u a g e ,
- activation/deactivation of the INFO
b u t t o n s o u n d ,
- the break (rest) reminder display i n t e r v a l ,
- restore factory settings.
SETTING MENU
System which provides access to the
settings of certain functions.
T o c h a n g e t h e s e t t i n g s , y o u
must stop the vehicle and switch
on the ignition.
Apply the parking brake and place
the gear lever in neutral.
When the vehicle is moving , t h e
setting menu screen is not displayed
when you press the INFO button.
The various menus may differ for the
type 1 instrument panel and the type 2
instrument panel.
With the ignition on , p r e s s t h e INFO
b u t t o n o n t h e d a s h b o a r d , t o t h e r i g h t o f
t h e i n s t r u m e n t p a n e l , s e v e r a l t i m e s i n
succession until the "SETTING MENU"
screen is displayed.
Operation
press and hold the INFO button for
a few seconds to display the menu
screen.
Press and hold the INFO button
for a few seconds to return to the
previous screen.
When the menus screen is dis-
p l a y e d , i f n o o p e r a t i o n i s c a r r i e d o u t
w i t h i n 1 5 s e c o n d s , t h e s e t t i n g m e n u
screen is displayed.
o n t h e m e n u s c r e e n , p r e s s t h e INFO
button to select a function from the
list:
MENU
2/3:
- a/b (option of displaying a different
language in the instrument panel
s c r e e n a n d t h e n a v i g a t i o n s c r e e n ) ,
- a c t i v a t i o n / d e a c t i v a t i o n o f t h e I N F O
button sound ,
- ALARM
(changing the "BREAK
R E M I N D E R " d i s p l a y i n t e r v a l ) ,
- choice of the direction indicators s o u n d ,
- a c t i v a t i o n / d e a c t i v a t i o n o f
current
f u e l c o n s u m p t i o n ,
MENU
1/3
:
- 1 - 2 (options for resetting aver-
age fuel consumption and average
s p e e d ) ,
- UNIT (choice of the fuel consump-
t i o n u n i t s ) ,
- choice of the t e m p e r a t u r e d i s p l a y
unit
s ,
- LANGUAGE (choice of display lan-
g u a g e ) ,
MENU 3/3:
- RESET
(restore factory settings).
Page 18 of 217
I
M O N I T O R I N G
34
C h o i c e o f f u e l c o n s u m p t i o n units
You can choose between different units
for displaying fuel consumption. On the menu screen:
press the INFO button to select
"UNIT" .
press and hold the INFO button for
a few seconds to display the "UNIT"
screen.
press the INFO button to scroll the
u n i t s ( k m / L , L / 1 0 0 k m , m p g ( U S ) ,
mpg(UK) and RETURN) in succes-
sion.
press and hold the INFO button
f o r a f e w s e c o n d s t o c o n fi r m y o u r
selection.
I n t h i s c a s e , t h e d i s t a n c e , s p e e d a n d
q u a n t i t y o f f u e l u n i t s w i l l a l s o b e c h a n g e d
in accordance with your choice of fuel
consumption unit.
I f t h e b a t t e r y i s d i s c o n n e c t e d , t h e
settings memory is cleared and
the default unit (km/L) is restored
automatically.
C h o i c e o f t e m p e r a t u r e d i s p l a y units
You can choose between different units
for displaying the temperature.
On the menu screen:
press the INFO button to se-
lect the temperature unit set-
ting symbol (thermometer).
press and hold the INFO button for
a few seconds to alternate between
the units (°C and °F).
T h e m o d e s e l e c t e d i s c o n fi r m e d .
I f t h e b a t t e r y i s d i s c o n n e c t e d , t h e
settings memory is cleared and the
default unit (°C) is restored automati-
cally.
O p t i o n s f o r r e s e t t i n g a v e r a g e f u e l c o n s u m p t i o n a n d a v e r a g e speed
You can choose between two average
fuel consumption and average speed
resetting modes:
- automatic reset ( choice 1) ,
- manual reset (choice 2) .
On the menu screen:
press the INFO button to select:
press and hold the INFO button for a
few seconds to switch in succession
from resetting mode 1
(automatic)
to resetting mode 2 (manual) .
T h e m o d e s e l e c t e d i s c o n fi r m e d .
Page 19 of 217
I
M O N I T O R I N G
35
C h o i c e o f d i s p l a y l a n g u a g e (LANGUAGE)
You can choose between different
languages for the screen.
On the menus screen:
press the INFO button to select
"LANGUAGE" .
press and hold the INFO button
for a few seconds to display the
"LANGUAGE" screen.
press the INFO button to scroll
t h r o u g h t h e l a n g u a g e s ( J a p o n a i s ,
E n g l i s h , D e u t s c h , F r a n ç a i s , E s p a -
n o l , I t a l i a n o , " - - - " a n d R E T U R N ) i n
succession.
press and hold the INFO button
f o r a f e w s e c o n d s t o c o n fi r m y o u r
selection.
I f y o u s e l e c t t h e " - - - " s e t t i n g , n o m e s -
sage will be displayed in message
display situations. I f t h e b a t t e r y i s d i s c o n n e c t e d , t h e
settings memory is cleared and
the default language (ENGLISH) is
restored automatically.
A c t i v a t i o n / d e a c t i v a t i o n o f t h e "INFO" button sound
You can activate or deactivate the
INFO
button sound.
On the menus screen:
press the INFO button to se-
lect the INFO button sound
activation/deactivation sym-
bol (located on menu 2/3) .
press and hold the INFO button for
a few seconds to alternate between
t h e c h o i c e s ( O N , O F F ) .
T h e m o d e s e l e c t e d i s c o n fi r m e d .
I f t h e b a t t e r y i s d i s c o n n e c t e d , t h e
settings memory is cleared and
the default choice (ON) is restored
automatically.
C h a n g i n g t h e d i s p l a y i n t e r v a l o f t h e " B R E A K R E M I N D E R " message
You can change the display interval of
the "BREAK REMINDER" message.
On the menu screen:
press the INFO button to select
"
ALARM
" (located on menu 2/3) .
press and hold the INFO button
for a few seconds to display the
"
ALARM
" screen.
press the INFO button to select
the display interval of the "BREAK
REMINDER" message.
press and hold the INFO button for
a f e w s e c o n d s t o c o n fi r m .
I f t h e b a t t e r y i s d i s c o n n e c t e d , t h e
settings memory is cleared and the
default value (OFF) is restored auto-
matically.
Page 20 of 217
I
M O N I T O R I N G
36
C h o i c e o f t h e d i r e c t i o n indicators sound
You can choose the sound of the direc-
t i o n i n d i c a t o r s , o n t h e t y p e 2 i n s t r u m e n t
panel only.
On the menus screen:
press the INFO button to select
sound 1 or 2 (located on menu 2/3) .
Functions F a c t o r y
setting
Resetting average fuel consumption and average speed
1 (automatic)
Fuel consumption units
L/100 km
Temperature display unit
°C
Display language ENGLISH
INFO button sound
ON (activated)
Display of
the "BREAK
REMINDER" message
OFF (deactivated)
A c t i v a t i o n / d e a c t i v a t i o n o f t h e c u r r e n t f u e l c o n s u m p t i o n
You can activate or deactivate the
c u r r e n t f u e l c o n s u m p t i o n , o n t h e t y p e 2
instrument panel only.
On the menu screen:
press the INFO button to select the
current fuel consumption activation/
deactivation symbol (located on
menu 2/3) .
press the INFO button for a few
seconds to alternate between the
c h o i c e s ( O N , O F F ) .
R e s t o r i n g f a c t o r y s e t t i n g s (RESET)
You can restore all of the factory settings
for all of the functions.
On the menu screen:
press the INFO button to select
"
RESET
"
(located on menu 2/2 or
3/3 depending on the instrument
panel) . The factory settings are:
press and hold the INFO button for
at least 5 seconds .
An audible signal is heard and all of the
factory settings are restored for all of
the functions.
Page 21 of 217
I
M O N I T O R I N G
37
MONOCHROME SCREEN
This provides the following information:
- t h e t i m e ,
- audio system information (refer to the "Audio and Telematics" section).
Setting the time
The digital clock can be set in automatic
mode or in manual mode .
Selecting the Setting
Select the automatic mode or the
manual mode as follows:
Press button A "PWR" to switch on
the audio system.
Access the setting mode by press-
ing button B "TUNE" for approxi-
mately 2 seconds.
Press button B "TUNE" several
times to scroll through the various
menus and select the CT menu
(clock time).
The order of the menus is the following: AF/
CT/REG/TP-S/PTY display language/SCV/
PHONE/Functions setting mode OFF.
Automatic mode
This mode permits automatic setting
of the local time using the signal from
RDS stations.
The symbol "CT" appears on the screen.
Manual mode
This mode permits manual setting of
t h e t i m e u s i n g t h e a u d i o e q u i p m e n t
buttons.
It can also be used when the "Automatic
m o d e " d i s p l a y s a n i n a c c u r a t e t i m e , w h e n
the local RDS stations are broadcasting
from a different time zone.
Page 22 of 217
I
M O N I T O R I N G
38
Set the time using the buttons as
indicated below:
with the ignition on or in the ACC
( A c c e s s o r i e s ) p o s i t i o n , p r e s s a n d
hold the CLOCK button until the
t i m e d i s p l a y fl a s h e s .
Press the appropriate button to set
the time:
Button
H: to set the hours
The hours digits scroll when you press
this button.
Button M: to set the minutes
The minutes digits scroll when you
press this button.
Button 00: to reset the minutes to
zero.
- from 1 to 29 min
: rounded down to
t h e p r e v i o u s h o u r ,
- from 30 to 59 min: rounded up to
the next hour.
Manual mode
Automatic mode
I n t h i s m o d e , s e t t i n g i s a u t o m a t i c u s i n g
the signal from the RDS radio stations.
A f t e r s e t t i n g t h e t i m e , p r e s s t h e
DISP button; the time display stops
fl a s h i n g .
The digital clock does not display
seconds.
When the "minutes" display is set or
r e s e t t o z e r o , t h e c l o c k s t a r t s a t t h e
zero second of the minute selected.
The time setting is lost if the battery
is disconnected.
Turn button B "TUNE" to the left or
to the right to select "CT ON" (auto-
matic mode) or "CT OFF" (manual
mode).
A f t e r s e l e c t i n g t h e m o d e , y o u c a n
exit the "Functions setting mode"
menu by pressing button B "TUNE"
for approximately 2 seconds.
If no action is carried out within
1 0 s e c o n d s , t h e s y s t e m w i l l e x i t
the "Functions setting mode" menu
automatically.