8-57
83. Install the battery holding plate by installing
the nuts.
4. Install the front carrier by installing the bolts.
5. Install the panel.
NOTICEECB00940Always keep the battery charged. Storing a dis-
charged battery can cause permanent batterydamage.
EBU27750Replacing a fuse
1. Positive battery lead (red)
2. Negative battery lead (black)
12
1. Fuse box
2. Main/EPS spare fuse
3. Main fuse
4. EPS fuse
5. Fuel injection system spare fuse
6. Fuel injection system fuse
U43P60E0.book Page 57 Tuesday, May 20, 2008 5:33 PM
8-58
8
The main fuse, the fuel injection system fuse, the
EPS fuse, and the fuse box are located under pan-
el A. (See page 8-8.)
If a fuse is blown, replace it as follows.
1. Turn the key to “OFF” and turn off all electrical
circuits.
NOTICEECB00640To prevent accidental short-circuiting, turn off
the main switch when checking or replacing afuse.
2. Remove the blown fuse, and then install a
new fuse of the specified amperage.
1. Ignition fuse
2. Headlight fuse
3. Four-wheel-drive motor fuse
4. Radiator fan fuse
5. Signaling system fuse
6. Auxiliary DC jack fuse
7. Spare fuseU43P60E0.book Page 58 Tuesday, May 20, 2008 5:33 PM
