2009 TOYOTA RAV4 fold seats

56 1-3. Adjustable components (seats, mirrors, steering wheel)
Moving a second seats for third seats entry (vehicles with third seats)
■Getting in the vehicl e (right side only)
Pull the lever forward and fold
down the seatback. The seat will
slide forward.
After passengers are in, lift up the
seatback and return the seat to
the original position.
■Third seats (if equipped)
The third seats do not have a
seat adjustment function.

57
1-3. Adjustable components (s
eats, mirrors, steering wheel)
1
Before driving
Folding second seats
Folding down the second seats will enlarge the luggage compart-
ment.
■ Before folding the second seats
Stow the second center seat belt. ( P. 70)
Make sure the outside seat belt
passes through the hanger when
folding the second seat.
This prevents the shoulder belt
from being damaged.
Stow the second seat belt buck-
les.
Lower the head restraint to the lowest position. ( P. 65)
Raise the armrest un til it locks. (P. 320)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5

58 1-3. Adjustable components (seats, mirrors, steering wheel)
■Folding second seats
Slide the second seats as far back as possible. ( P. 54)
From inside
Pull down the seatback angle
adjustment lever and fold down
the seatback.
From outside (vehicles without third seats) Open the back door and pull the
lock release lever to fold down
the second seat.
STEP 1
STEP 2
STEP 2

59
1-3. Adjustable components (s
eats, mirrors, steering wheel)
1
Before driving
Stowing third seats (vehicles with third seats)
■ Before stowing the third seats
Stow the third seat belt buckles.
Pass the seat belts through the
seat belt hangers.
This prevents the shoulder belt
from being damaged.
Lower the head restraint to the lowest position. ( P. 65)
Pull the seatback lock release
strap to fold do wn the seatback.
Make sure it is locked securely.
STEP 1
STEP 2
STEP 3
STEP 4

63
1-3. Adjustable components (s
eats, mirrors, steering wheel)
1
Before driving
CAUTION
■When folding second seats
●Do not fold the second seatback when passengers sit or luggage is placed
on the seat.
● Do not allow passengers to ride on the folded seat or in the luggage com-
partment while driving.
● Make sure that no passengers or luggage are on the rear seats.
● Make sure the seatback is securely locked by pushing forward and rear-
ward on the top of the seatback.
Failure to do so will prevent the seat belt from operating properly.
■ When stowing third seats
●Make sure that no passenger or luggage are on the seats. Then, hold the
seat and slowly move it.
Otherwise, people may be injured or luggage may be damaged if the seat
hits them.
● Make sure the seat is securely locked by pushing forward and rearward on
the top of the seatback or by trying to pull up the edge of the bottom cush-
ion.
Failure to do so will prevent the seat belt from operating properly.
● Make sure the seat belts are not twisted or caught in the seatback and are
arranged in their proper position ready for use.
● Do not stow or return the seats when you are inside the vehicle in order to
prevent pinching your hands or feet in the seat.
Be sure to stow and return the seats from outside the vehicle.

64 1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
■After adjusting a seat
●After adjusting the seat position, try sliding it forward and backward to
make sure it is locked in position.
● After adjusting the seatback, push your body adjust the seatback to make
sure it is locked in position.
● Make sure the seat belts are not twisted or caught in the seatback and are
arranged in their proper position and are ready for use.
NOTICE
■Before folding the seats
To prevent damage to the seat belt buckles, stow them before folding the
seatback.

70 1-3. Adjustable components (seats, mirrors, steering wheel)
■Releasing method
The second center seat belt can be completely released only when
necessary such as when folding down the second seats.
Insert the key into the hole on
the center seat belt buckle to
release the tab (with hook end),
and allow the belt to retract.
Stow the seat belt tabs in the
cover located on the roof as
shown.
STEP 1
STEP 2

122 1-7. Safety information
Installation with LATCH system (second outside seats only)
Fold the seatback while pulling
the lever. Return the seatback
and secure it at the 1st lock posi-
tion (most upright position).
Adjust the seatback to the 3rd
lock position. (P. 54)
1st lock position
7th lock position
Type A
Latch the hooks of the lower
straps onto the LATCH anchors.
The bars are installed in the
clearance between the seat cush-
ion and seatback.
If the child restraint has a top
tether strap, the top tether strap
should be latched onto the top
tether strap anchor.
For owners in Canada:
The symbol on a child restraint
system indicates the presence of
a lower connector system.
STEP 1
STEP 2
Canada only