2009 SKODA YETI ESP

Communication
126
CommunicationMultifunction steering wheel*Operate radio und navigation on the multifunction steering wheelThe driver can set the basic functions of th
e radio and navigation by simply operating
the buttons located on the steering wheel so
that he can concentrate on the traffic situ-
ation without being distracted as little as
possible by operating the radio and naviga-
tion
⇒fig. 126
.
This applies only if your vehicl
e has been installed with radio
11) or navigation system
at the factory. You can of course operate th
e radio and navigation at the appliance. You
will find a description in the operating instructions of your radio. When the headlights are switched on, the steering wheel pushbuttons are then also illuminated. The buttons apply for the respective operating mode of the current radio or navigation system. By pressing the buttons, you can carry out the following functions:11)Does not apply for Radio Blues.
Fig. 126 Multifunction steering wheel: control buttons
sgg.6.book Page 126 Thursday, September 24, 2009 2:32 PM

Communication
129
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
Mobile phones and tw
o-way radio systems
The installation of a mobile phone and two-way radio system in a vehicle should be carried out by a specialist garage. Mobile phones send and receive radio wave
s during a conversation as well as in
standby mode. Radio waves can be harmful
to the human body if their frequency
exceeds certain limit values. Škoda Auto permits the operation of mobile
phones and two-way radio systems with
a professionally installed external aerial and a maximum transmission power of up to 10 watts. It is essential that you inform yourself at
a specialist garage about the possibilites to
assemble and operate systems
which have a power output of more than 10 W. They
will inform you which technical possibilit
ies exist for retrofitting mobile phones.
When using a mobille phone inside the vehicl
e, which is not inserted into the phone
adapter, and thus has no connection to the
external aerial, the electromagnetic radia-
tion can exceed the current limit value. We therefore recommend to operate a mobile phone in the vehicle only when it is conne
cted to an external aerial via the phone
adapter. This improves the quality of the connection. Operation of mobile phones or two-way ra
dio systems may interfere with functioning
of the electronic systems of your vehicle. The reasons for this may be:•
no external aerial,
•
external aerial incorrectly installed,
•
transmission power greater than 10 watts.
WARNING
•
If a mobile phone or a two-way radio
system is operated in the vehicle
without using a special exte
rnal aerial or an extern
al aerial which has been
incorrectly installed, this can increase the strength of the electromagnetic field in the interior of the vehicle.•
Please concentrate fully at
all times on your driving!
•
You must not install two-way radio systems, mobile phones or mounts on
the covers of the airbags or within the immediate deployment range of airbags. This might result in injuries to the
occupants in the event of an accident.
•
Never leave a mobile phone on a seat, on
the dash panel or in another area,
from which it can be thrown during a sudden braking manoeuver, an accident or a collision. In this case, the occupants of the vehicle might be injured.
Note
Observe the country-specific regulations for the use of mobile phones in vehicles.Universal telephone preinstallation GSM II*IntroductionThe telephone preinstallation GSM ll is a complete and built-in “handsfree-system”, it provides a voice operated convenience mode via the multifunction steering wheel* or the touchscreen of the radio*
or the navigation system*.
All communication between a telephone and
the handsfree-system of your vehicle
can only be established with the help of the Bluetooth
® technology. The adapter*
serves only for charging the telephone and fo
r transmitting the signal to the external
aerial of the vehicle. To ensure an optimum signal transmission, always leave the telephone with the adapter* in the telephone mount. A phone phonebook is part of the mobile ph
one preinstallation with voice control. In
the phone phonebook there are 1 500 free me
mory locations available. This phone
phonebook is independent of the a
ppliance used for the mobile phone.
If the system answers with the voice response “
Telephone is not ready
”, please check
the operating state of the telephone as follows:
a)Only valid for the navigation system Columbus.
WARNING (continued)
sgg.6.book Page 129 Thursday, September 24, 2009 2:32 PM

Communication
130
•
Is the telephone switched on?
•
Is the PIN code entered?
WARNING
Pay attention primarily to the traffic situation! As the driver you are fully responsible for road safety. Use the teleph
one system only to such an extent, so
that you are in full control of your vehicle at any time.
Caution
Taking the mobile phone out of the adapter du
ring the call can lead to interruption of
the connection. When taking out the mobile phone, the connection to the factory-fitted antenna is interrupted, this reduces the quality of the transmitting and receiving signal. The charging of the mobile phone battery is also interrupted.
Note
•
Please also refer to the additional instructions
⇒page 129, “Mobile phones and
two-way radio systems”.•
Should you have any questions, please
contact an authorised Škoda Service
Par tner.Bluetooth
®
The Bluetooth
® technology serves as cableless connection of a mobile
phone to a hands-free sy
stem of your vehicle.
In order to connect a mobile phone with Bluetooth
® to the hands-free system, it is
necessary to adapt the phone and the hands-free system to each other. Detailed infor- mation on this is provided in the operatin
g instructions of your mobile phone. The
following steps must be carried out for the connection: – Switch on the ignition.– Select Bluetooth
® on the mobile phone and select the menu with which the
mobile phone searches for suitable Bluetooth
® devices.
– If the hands-free system on the display of the mobile phone announces
Skoda
UHV
, enter the PIN°
1234
within 30 seconds and wait, until the connection is estab-
lished.
12)
While connecting the mobile phone with th
e hands-free system by means of Blue-
tooth
®, no other phone can be connected with the hands-free system via Bluetooth
®.
Up to three mobile phones
can be connected to the hand
s-free system by means of
Bluetooth
®, whereby only one mobile phone can communicate via Bluetooth
® with
the hands-free system. If a fourth mobile phone is connected to the handsfree-system, then the telephone, which has not been used together with the handsfree system via Bluetooth
® for the longest peri
od, is disconnected.
Establish Bluetooth
® connection
After switching on the ignition, the Bluet
ooth connection is auto
matically established
for the already adapted mobile phone
12). Check on the mobile
unit if the automatic
connection was established. Disconnect Bluetooth
® connection
After withdrawing the ignition key, the Bluetooth
® connection is disconnected.
WARNING
In the event of air transport, the Bluetooth
® function of the handsfree-system
must be switched off
by a specialist garage!
Note
•
Not valid for all mobile phones which enable a communication via Bluetooth
®.
You can ask at a Škoda Service Partner if
your telephone is compatible with the
universal telephone preinstallation GSM II.•
Note that the range of the Bluetooth
® connection to the ha
ndsfree-system is
limited to the vehicle interior. The range is
dependent on local factors, e.g. obstacles
between the devices and interferences with othe
r devices. If your mobile phone is e.g.
12)Some mobile phones have a menu, in which the authorization for establishing a Bluetooth
®
connection is performed via the input of a code. If the input for the authorization is necessary, it must always be performed when re-e
stablishing the Bluetooth connection.
sgg.6.book Page 130 Thursday, September 24, 2009 2:32 PM

Communication
134
Enter PIN codeA PIN code must be entered before operating the system. – Press the PTT button. – Give the command
ENTER PIN/PIN CODE
after the signal tone.
After this command the PIN code can be entered. The entry of the PIN code is only possible if:•
the ignition is switched on;
•
the mobile phone is in the mount;
•
the mobile phone is switched on.
Notes for entering the PIN code•
When entering a PIN code with more
than 8 digits, the system indicates “
The PIN
is too long
”.
•
When entering an incorrect PIN code, the system indicates “
The PIN is incorrect
”.
•
If the incorrect PIN code has been entered three times consecutively, the card is
blocked. With the aid of the personal unbl
ocking code PUK (Personal Unblock Key), the
SIM card can be unblocked.
The unblocking code can only be entered via the phone
keypad and not through the voice control.
Voice commands for operating the phone
phone book
Activity
SAVE/STORE
NAMES/NAME/NUMBER
After this command a name
with its telephone number
can be stored in the phone phone book.
SELECT NAMES/NAME
After this command a telephone number which was stored under its given name in the phone phone book can be selected.
DELETE NAMES/NAME
After this command a name in the phone phone book can be erased.
LISTEN TO/PLAY PHONE-
BOOK
After this command you ca
n listen-in to the phone
phone book.
DELETE PHONEBOOK
After this command the comp
lete phone phonebook or
one of the stored names can be erased.
Other possible com-
mands
Activity
DIAL
The telephone number is selected.
STORE
In addition to the name in the phone book, which is selected on the information display, a voice recording is stored to select with the help of the voice commands or the entered PIN code.
REPEAT
The entered name or the digits are repeated. Then the system requests with voice response “
please proceed
”
the entry of further digits or commands.
BACK
The entered name or the last entered order of digits is erased. Previously entered groups of digits are repeated. Then the system requests with voice response “
please
proceed
” the entry of further digits or commands.
DELETE
All entered digits are erased. Then the system requests with voice response “
The number is deleted. The
number please
” the entry of further digits or com-
mands.
CANCEL
The dialogue is ended.
Other possible com-
mands
Activity
sgg.6.book Page 134 Thursday, September 24, 2009 2:32 PM

Communication
135
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
Phone voice phonebook*Example for storing names– Press the PTT button. – Give the command
SAVE/STORE NAMES/NAME/NUMBER
after the signal tone.
After giving this command, the system requests the entry of a name and a telephone number which should be stored in the phone voice phonebook. In the phone voice phonebook up to 50 entries can be stored. The stored entry is shown on the information display* with an asterisk in front of the name. For similar names additional information (e.g. first names) should be stored. Example for storing in
the phone voice phonebook
Inputs AUX-IN* and MDI*The input AUX-IN is located below the armrest* of the front seats and is marked with 
.
The input MDI is located in the front centre console.
The inputs AUX-IN and MDI connect the ex
ternal audio sources (e.g. iPod or mp3
player) and record music from these device
s via your radio* or navigation system*
installed in the factory. The description of the operation can be found
in the relevant Ow
ner's Manual of your
radio* or your navigation*.
Note
•
The loudspeakers in the vehicle are matched to a power output of the radio and
navigation system of 4x 20°W.•
For the equipment sound system*, the
loudspeakers are matched to a power
output of the amplifier of 4x40°W + 6x20 W.CD changer*The CD changer for the radio and navigation sy
stem is housed on th
e left-hand side of
the luggage compartment.Loading a CD– Press on the button and insert the CD (compact disc) into the CD case . The
CD is automatically loaded onto the next
free position in the CD-changer. The LED
in the corresponding button stops flashing.
Voice command
Announcement
SAVE/STORE NAMES/NAME/NUMBER
“ The name please
”.
COMPANY XYZ
“Please repeat the name
”.
COMPANY XYZ
“The number please
”.
ZERO ONE TWO THREE
“Zero One Two Three
”.
FOUR FIVE SIX
“Four Five Six
”.
If no entry is put in, the following a
nnouncement is made af
ter about 5 seconds.
“Possible commands are: store, repeat, correct, delete or more digits
”.
STORE
“The name COMPANY XYZ is stored
”.
Fig. 130 The CD changer
AA
AB
AD
sgg.6.book Page 135 Thursday, September 24, 2009 2:32 PM

Communication
136
Load CDs– Hold the button pressed and guide the CDs one after the other (maximum
6 CDs) into the CD case . The LEDs in
the buttons are no longer flashing.
Loading a CD to one definite position– Press on the button . The LEDs in the
buttons light up at the memory spaces,
which are already assigned and flash in the case of free memory spaces.
– Touch the desired button and
guide the CD into the CD-case .
Ejecting a CD– Briefly press on the button , in order to eject a CD. For assigned memory spaces,
now the LEDs light up in the buttons .
– Touch the corresponding bu
tton . The CD is ejected.
Ejecting all CDs– Hold the button pressed for more than 2
seconds, in order to eject the CDs. All
CDs in the CD-changer are ejected consecutively.Note
•
Always guide the CD into the CD-case
with the printed side pointing upwards.
•
Never push the CD with force into the CD-case as the insertion is performed auto-
matically.•
After loading a CD into the CD-changer, yo
u must wait until the LED of the corre-
sponding button lights up. Then the CD
-case is free to load the next CD.
•
If you have selected a position, on which
a CD is already located, this CD will be
ejected. Take out the ejected CD and load the desired CD.
AA
AB
AD
AA
AD
AD
AB
AC
AD
AD
AC
AB
AD
AB
sgg.6.book Page 136 Thursday, September 24, 2009 2:32 PM

Passive Safety
137
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
SafetyPassive SafetyBasic informationDriving the safe way Passive safety measures reduce the risk
of injury in accident situations.
In this section you will find important info
rmation, tips and notes on the subject of
passive safety in your vehicle. We have
combined everything here which you should
be familiar with, for example, regarding seat
belts, airbags, child seats and safety of
children. It is therefore important, in partic
ular, to comply with the notes and warnings
in this section for your own interest and in the interest of those travelling with you.
WARNING
•
This chapter contains important information on how to use the vehicle for
the driver and his occupants. You will find further information on safety, which concerns you and those travelling with you, in the following chapters of this Owner's Manual.•
The complete on-board literature should always be in the vehicle. This
applies in particular, if you rent out or sell the vehicle.Safety equipment The safety equipment is part of the occupant protection and it can reduce the risk of injuries in accident situations.“Do not put at risk” your safety and the safety of those travelling with you . In the event of an accident, the safety equipment can redu
ce the risk of injuries. The following list
contains part of the safety
equipment in your vehicle:
•
Three-point seat belts for all the seats,
•
belt force limiter for front seats,
•
belt tensioner for front seats,
•
seat belt height adjuster for front seats,
•
front airbag for the driver and front passenger,
•
driver's knee airbag*,
•
front side airbags*,
•
rear side airbags*,
•
head airbags*,
•
anchoring points for child seat using the “ISOFIX” system,
•
anchoring points for child seat using the “Top Tether” system,
•
head restraint adjustable for height,
•
adjustable steering column.
The specified safety equipment works togeth
er, in order to optimally protect you and
those travelling with you in accident situat
ions. The safety equipment does not protect
you or the people travelling with you, if
you or your occupants adopt an incorrect
seated position or the equipment is
not correctly adjusted or used.
For this reason you will be provided with information on why this equipment is very important, how it protects you and the occupants, what should be observed when using the equipment and how you and the peop
le travelling with you can make full use
of the existing safety equipment. This
Owner's Manual contains important warning
notes, which you and those travelling with
you should pay attention to in order to
reduce a risk of injury. Safety concerns everybody!Before setting off The driver is always fully responsibl
e for his occupants and for the oper-
ating safety of the vehicle.For your own safety and the safety of the pe
ople travelling with you, please pay atten-
tion to the following points before setting off:
sgg.6.book Page 137 Thursday, September 24, 2009 2:32 PM

Passive Safety
138
•
Ensure that the lighting and the turn signal system are functioning properly.
•
Inspect the tyre inflation pressure.
•
Ensure that all the windows offer
a good visibility to the outside.
•
Safely attach the items of luggage
⇒page 78, “Loading the luggage compartment”.
•
Ensure that no objects can obstruct the pedal.
•
Adjust the mirror, the front seat and the head restraint to match your body size.
•
Point out to your occupants that the head
restraints must be adjusted to match
their body size.•
Protect the children in suitable child seats with correctly fastened seat belts
⇒ page 156, “Transporting children safely”.•
Adopt the correct seated position
⇒page 138, “Correct seated position”. Also
inform your occupants to adopt the correct seated position.•
Fasten the seat belt correctly. Also inform your occupants to properly fasten the
seat belts
⇒page 143, “How are seat be
lts correctly fastened?”.
What influences the driving safety? The driving safety is primarily determined by the style of driving and the personal behaviour of all the occupants.The driver is fully responsible for himself an
d his occupants. If yo
ur driving safety is
effected, you place yourself and the oncomi
ng traffic at risk. Please refer to the
following guidelines.•
Do not get distracted from concentrating on the traffic situation, e.g. by your occu-
pants or mobile phone calls.•
Never drive when your driving ability is impaired, e.g. through medication, alcohol,
drugs.•
Keep to the traffic regulations and the permissible speed limit.
•
Adjust the driving speed at all times to the road condition as well as to the traffic
and weather conditions.•
Take regular breaks on long journe
ys - at the latest every two hours.
Correct seated positionCorrect seated position for the driver Correct seated position for the driver is important for safe and relaxed driving.Fig. 131 The correct distance of
the driver from the steering wh
eel / the correct head restraint
adjustment for the driverFor your own safety and to reduce the risk of injury in the event of an accident, we recommend the following setting.•
Adjust the steering wheel so that the distance between the steering wheel and your
chest is at least 25 cm
⇒fig. 131
on the left.
•
Position the driver seat in the forward/back direction so that you are able to fully
press the pedals with your legs at a slight angle.•
Adjust the seat backrest so that you are able to reach the highest point of the
steering wheel with your arms at a slight angle.•
Adjust the head restraint so that the top edge of the head restraint is at the same
level as the upper part of your head
⇒fig. 131
on the right.
•
Fasten the seat belt correctly
⇒page 143, “How are seat belts correctly fastened?”.
Manual driver se
at adjustment
⇒page 12, “Adjusting the front seats”.
Electrical driver seat adjustment
⇒page 70, “Adjusting front seats electrically*”.
sgg.6.book Page 138 Thursday, September 24, 2009 2:32 PM