Range selector key NAV (Navigation)
30
•
The number of useable and tracked satellites to be received (the number of
useable satellites determines the GPS status).Delete destinations in the destinat
ions memory or in the list of
the last destinations– Press the button while in a random menu of the
Navigation
.
– You can select the function key using the
menu control button .
– In the pop-up window, you can dele
te all manually or automatically
stored destinations or only the la
st destinations using the function
keys or .
Store or edit your home addressStoring the current position as a home address – Press on the function key while in the main menu
Navi-
gation
.
– If your home address has not yet been stored, confirm the following
question with the function key .
– Press on the function key and your current position is stored
as home address.
Editing a stored home address – If your home address has already
been stored, the automatic route
guidance starts after pressing the function key .
– If you wish to change your home address, press the button and
then the menu point while in the menu Navigation
.
Route guidanceEntering a stopover destinationIf, in addition to the displayed travel
destination, a stopover destination is
added, proceed as follows. The stopover destination can only be entered when starting the route guidance. – Select the destination and start the route guidance.– Press on the range selector key to change into the main menu
Navigation
.
– Select a destination and start the route guidance. – If you wish to store the newly ente
red destination as a stopover desti-
nation, press the function key .
– If you wish to end the route guidance which has started, press the
function key .
Only one destination and one
stopover destination can be entered during the route
guidance. A corresponding navigation announcement
sounds when reac
hing the stopover
destination. The route guidance is renewe
d after a few seconds. Then you can re-
enter a new stopover destination. If you enter a new stopover destination be
fore reaching the original destination,
you must decide if you wish to overwrite the “old” stopover destination with the “new” stopover destination.Route options The menu
Route options
is used to determine th
e criteria according to
which a route is to be calculated and
what types of destinations you wish
to allow for the route calculation. Th
e route options can also be changed
during a route guidance.
SETUP
Delete destinations memory
A10
All dtns.
Last destins.
Home addr.
Ye s
Position
Home addr.
SETUP
Enter home address
NAVStopover
New destination
s36c.b.book Page 30 Thursday, April 9, 2009 2:50 PM
