2009 SKODA SUPERB turn signal

General information
4Audio settings– Press the button and then the station key and select the desired
parameter.
– Set the desired value by turning the menu control button .You can select between the following parameters:•
BASS
- bass setting;
•
MIDDLE
- midtone setting;
•
TREBLE
- treble setting;
•
BALANCE
- setting of the volume ratio between the left and right side;
•
FA D E R
- setting of the volume ratio between the front and the rear;
•
ON VOL

•
PDC VOL
•
GALA
•
LO U D
- in case of low volume level, this
function reinforces the range of bass
and treble frequencies. ON VOL Your radio stores the last volume set before switching off. If the value is higher, the volume is reduced to the value of the parameter
ON VOL
after switching on the
radio again. GALA Your radio increases automatically its volu
me with the increasing vehicle speed. A
higher setting value results in a stronger volume increase. PDC VOL* If your vehicle is
equipped with “parking aid”,
the volume is automatically
decreased to a pre-defined value, wh
en the “parking aid” is active.
Setting the special functions– Press the menu control button for a long period of time. – Select the individual functions of the menu with the help of the station
keys.
– Set the desired value using the menu control button or with the
help of the station keys.
AUX* Switching on or off the function
s of the external audio source.
Setting of the input sensitivity
AUX LEV
:
•
AUX LEV 1
- high level, used in particular for notebooks;
•
AUX LEV 2
- middle level, used for cassettes or CD player;
•
AUX LEV 3
- low level, used for MP3 player;
PHONE* If your vehicle is
equipped with a ha
ndsfree system, you can switch on or off the
monophone play function of the mobile
phone calls via the loudspeakers of the
vehicle. BEEP Switching on or off the tone signal when storing the radio stations. ILLUM Switch on (value
2) or switch off (value
1) the rear lighting of the control buttons.
AF The function alternative frequency (AF) ensures that the best receivable frequency of the selected station is automatically an
d precisely set. The replay of the broad-
cast can be muted briefly during the search process according to the best receiv-able frequency. If no alternative frequenc
y of the set station can be found and the
station no longer offers a satisfactory qu
ality, then please select another station.

A12
A2
A2
A2
sag.9.book Page 4 Wednesday, March 11, 2009 3:20 PM

General information
5
REG Certain programs of the broadcasting companies are divided into regional programs at specific times. That is why in
individual regions the regional programs
of a station can broadcast different contents. First of all the unit attempts to set only alternative frequencies of the selected station. If the quality is however so low, that there is a risk of a “program loss”, the unit also accepts “related” frequencies.•
FIX
- the receiver switches to a regional “related” station, if the reception of the
current station could be interrupted;•
AUTO
- the receiver can access the re
gional “related” station unlimited.
BT-AUDIO* Enables a wireless transfer of MP3 da
ta from the telephone preinstallation.
Radio modeWaveband switch-over– Press the button for a
long period of time.
Your radio is equipped with FM and AM wavebands. They are divided in 6 memory levels, i.e. 3 levels for the FM waveband and 3 levels for the AM waveband. There are each 6 memory spaces available on these levels. Activation of the FM waveband The FM waveband is activated when pressing the station key
FM
. By briefly
pressing the button , you can select between the memory levels FM1, FM2 and FM3. Activation of the AM waveband The AM waveband is activated wh
en pressing the station key
AM
. By briefly
pressing the button , you can select between the memory levels AM1, AM2 and AM3.
The process of searching for and storing the radio stationsManual search – Search the frequency of the desire
d radio station by turning the menu
control button .
Store station – After selecting the radio station, hold the station key , on which it
should be stored until it briefly switches to mute and a brief signal sounds.
Automatic station finding with storing the radio stations – Press the button . An automatic station finding is started during
which the 6 stations with the strongest signal in the memory level FMAS and/or AMAS are stored.
When storing the radio stations on the station keys is finished, you can call up the desired radio station by pressing a station key .
Note
The stored radio stations of the curren
t waveband are updated and stored once
again in the memory level FMAS and/or AM
AS by repetitively pressing the button
.
Function SCANThe stations of a waveband
can be played briefly one after the other (for
ten seconds). – Press the menu control button , the radio searches automatically all
available stations of the current waveband.
– In order to call up the original radio station, press the station key
CANCEL
.
RADIO
A12
RADIO
A12
RADIO
A2
A12
AS
A12A12
AS
A2
A12
sag.9.book Page 5 Wednesday, March 11, 2009 3:20 PM

General information
6 – End the automatic finding by pressing the button
OK
. The current
radio station remains selected.
– If you wish to select other radio stations, press the button
SKIP
.
RDS functionsCertain radio stations transmit addition
al text information - designated as
radio text. – The information of the radio text is displayed by pressing the button
.
Note
•
The text information must not be available to all radio stations.
•
Depending upon the quality of the received signal, the radio needs a specific
time, in order to correctly read all the illustrated characters.Traffic information functionActivating and deactivating the traffic announcements Press the button ,
TP appears in the display. If a set radio station does not
transmit traffic announcements, the radio searches for a station which transmits traffic announcements. An incoming traffic announcement automatica
lly interrupts the CD play function or
listening to a radio station, which at that moment is not transmitting a traffic announcement. At the end of the traffi
c announcement, the radio automatically
returns to the original play function. If you wish to deactivate the reception
of traffic announcements, press once again
the button ,
TP goes out on the display.
A12
A12
INFO
TP
TP
sag.9.book Page 6 Wednesday, March 11, 2009 3:20 PM