Basic setting
15
– Activate or deactivate the desired TIM recording time by pressing the
button . If the check-box is active
the accompanying TIM
recording time is activated.
The unit starts with the recording 90 minutes before the set start time and ends the recording 30 minutes afterwards.Media set-upsCall up the menu
Setup Media
by pressing the selector key and
the function key .Function keys in the menu – Media set-ups
– for playback of an external audio source.
- enables a wireless transfer of MP3 data to the telephone
preinstallation.
– according to the set-ups the title and performer
name or only the data and folder name
will be displayed for audio CDs with CD
texts and in the MP3 operation.
– plays all MP3 data one after the other
according to the sequence on the played medium, which are stored in the folders and sub-folders.
– the input sensitivity of the AUX-IN socket for adjusting the play
function volume of a connected external audio source can be adapted to other audio sources in three steps. Press on the function key and select the desired input sensitivity in the opening pop-up window. If a multimedia socket MEDIA-IN is additionally built in, this setting also applies for an iPod connected to the multimedia socket.System set-upsCall up the menu
Setup System
by pressing the selector key and
the function key .
Change the system language manually – Press on the function key and select the desired
language in the opening pop-up window. The system language is normally preset to the set language in the instrument cluster “ Automatic
”. If desired, another langua
ge can be selected for the
radio as described.
Resetting the factory settings on the unit – Press on the button . – Confirm the following safety interrogation, the unit will be reset in the
as-delivered condition and all the stored data will be erased.
Rear lighting of the control buttons – On the unit, you can switch the rear lighting of the control buttons
and on or off , if the ignition is switched on.
Phone set-upsCall up the menu
Setup Phone
by pressing the selector key and
the function key . Updating phone data in the unit – Press on the function key to update all entries in
the unit, the phone book of the mobi
le phone or the SIM card entered
since the last connection. This
procedure can take a few minutes.
– Confirm the following safety interrogation. The “old” data in the
phone book can still be selected at
the unit while the data is being
updated.
– In this case, consult the instructio
n manual applicable to your vehicle.
Active
SETUP
Media
Activate AUX entryActivate Bluetooth audioDeactivate performers/Title namesScan/Mix/Repeat including sub-folderAUX Input level
AUX Input level
SETUP
System
System language
Fa c t o r y s e t t i n g s
A1
A2
2
1
SETUP
Phone
Update phone book
s1ok.1a.book Page 15 Monday, March 30, 2009 3:29 PM
