Page 33 of 38

Range selector key NAV (Navigation)
31
– Press the button and then the function key
while in the main menu
Navigation
.
– Press on the function key . – You can determine which types of destinations should be provided or
not by using the function keys , and . These types of destinations will, however, be used for the route calculation if th
ere is no other logical route to the
destination (e.g an island is to be used without using a ferry).
Determining the parameters for the route calculation•
Fa st
: It calculates the fastest route to your
destination, even if a detour is neces-
sary.•
Short
: Longer driving time in favour of a shorter route is acceptable. Please
note that the setting “Short route” during route guidance can sometimes lead to unexpected results.•
Economical
: The aim of the calculation is
a balance between
minimal driving
time and driving distance.Route guidance
Select the destination and start the route guidance. The unit will switch over to the map display. – You can change the scale of the map display by turning the menu
control button .
– The last navigation announcement
is repeated if you press the menu
control button .
– You can change between the main menu
Navigation
or the map
display by pressing the range control button .
The route to be driven is highlighted
during the route guidance, the symbol
3
shows the current vehicle position, the symbol
shows the distance to the desti-
nation and the symbol
shows the estimated time of arrival or the driving time.
Stretches of the road ahead can also be
blocked manually during a route guidance
⇒ page 32.Stopping the route guidanceSelect the destination and start the route guidance. The unit will switch over to the map display.
SETUP
Route options
Route criteria
˜ Dynamic route
˜ Avoid motorways
˜ Avoid toll roads/ferry
BAT-20H1126
Fig. 18 Map display with function keys
Fig. 19 Map display during the route guidance
A10A10
NAV
s36c.b.book Page 31 Thursday, April 9, 2009 2:50 PM
Page 34 of 38

Range selector key NAV (Navigation)
32
– The route guidance is interrupted
and the function key changes to
“ Start
” by pressing the range control button and then the func-
tion key .
– If you press on the function key
the route guidance will continue
at the current position.
Inserting routenlistThe routenlist for the trip can only be displayed during a route guidance. Additional window in the map display – An additional window opens if you press the button during the
route guidance.
– Select the function key in the additional window. The
routenlist is displayed. The list of the points (street names, street descriptions and stretches of the road
) still to be driven, is displayed
in the
Routenlist
.
– In addition, the distance still to be driven on the driven road and the
estimated time to the following turning point are displayed.
Manually excluding a stretch of the road – You can select the beginning of the
stretch of the road to be excluded
by using the control button .
– Press on the function key , this changes to the function key
.
– Select the end of the stretch of the
road to be excluded and select the
function key .
– The route is newly calculated. – If you wish to cancel the exclusion of the stretch of the road, press the
function key .
Dynamic route guidance with TMC use Switching the dynamic navigation on or off – Press the button and then select the function key
while in the main menu
Navigation
.
– In the menu
Route options
, activate the check box
and select the desired set-up by pressing your choice in the pop-up window.
Requirements for a dynamic route guidance TMC (Traffic Message Channel) is a digital radio data service for
continuous
trans-
mission of traffic information. The unit has a continuous background of
TMC traffic reports providing a TMC
station at the current location can be received. The quality of the transmitted traffic reports depends on the broadcast editing carried out by the radio station. The reception of the TMC traffic reports cannot be switched on or off. The station you are listening to do
es not have to be a TMC station.
TMC traffic reports can only be evaluated an
d displayed by the unit if the navigation
data for the currently driven area is stored
in the unit memory or can be called up
via an inserted navigation CD. The current TMC traffic reports can be displayed by pressing the selector key
.Note
•
There may not be any advantage in avoiding the traffic jam if, as a result of the
TMC traffic reports, the divers
ion is also heavily congested.
•
You can manually block the information for the route in front of you if traffic
problems ahead have not yet been in
cluded in the TM
C traffic reports
⇒page 32.
NAV
Stop
Start
º
Routenlist
A1Exclude
Exclude to
Exclude toCancel
SETUP
Route options
˜ Dynamic route
TRAFFIC
s36c.b.book Page 32 Thursday, April 9, 2009 2:50 PM
Page 36 of 38

Index
34
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 TRAFFIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Route options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30SScan
Automatic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Automatic play audio mode . . . . . . . . . . . . . . . . 20
Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Settings
Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Set-ups
Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Traffic station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Speed dependent Volume adjustment
GALA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Station name
RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Switching the system off . . . . . . . . . . . . . . . . . . . . . . . 7Switching the system on . . . . . . . . . . . . . . . . . . . . . . . . 7TTMC
Dynamic route guidance . . . . . . . . . . . . . . . . . . . 32TMC traffic reports . . . . . . . . . . . . . . . . . . . . . . . . 16
TP (Traffic Program)
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Traffic report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
WWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
s36c.b.book Page 34 Thursday, April 9, 2009 2:50 PM