2009 SKODA OCTAVIA display

Range selector key MEDIA
20
– Press on the function key to open the appropriate higher priority
folder.
– By pressing repetitively, you can reach the root folder of the
played medium while moving from folder to folder. Then the function key is inactive.
Repeat track – Press the function key in the
Media
menu and then the func-
tion key (repeats the current track) or (constantly repeats all the tracks in the folder).
Random play function – Press on the function key in
MEDIA
.
– Press on the function key in the pop-up window. All titles of the
current audio source will now be played in random order.
– If you press the function key in the pop-up window, the
tracks of the current folder are played in random order.
– Use the function key to terminate the function of the current
title. The normal play function continues with the current title.
Automatic play (Scan function)– Press on the function key in
MEDIA
.
– Press on in the pop-up window. All the titles of the current audio
source are played for approximately 10 seconds.
– Press to terminate the play function of the current title. The
normal play function continues with the current title.
Alternatively, start and end the automatic
play by briefly pressing the menu control
button .MP3 and WMA dataGeneral information for MP3 operationRequirements for the MP3 data and data carrier•
CD-ROM, CD-R, CD-RW with a capacity of 650 MB and 700 MB.
•
The CDs must correspond to the ISO 9660
Level 1 or Level 2 standard as well as
the Joliet data system (single and multi-session).•
Data names must be no longer than 256 characters.
•
The list structure is restricted
to a depth of 8 list levels.
•
An MP3 CD must not have more than 50°folders and 500°data.
•
A memory card must not have more than 5°000°folders and 15°000°data. Thus,
one folder must not have more than 6°000 data.•
The name of the artist, the album and the title of the reproduced MP3 data can
be shown as ID3 tag, providing this information is available. The list and data name will be displayed if
there is no ID3 tag.
•
Playlists are not supported.
•
WMA data (
Windows
Media
Audio) can also be played
even if the copyright is
additionally protected
by the DRM procedure (
Digital
Rights
Management). Such
WMA data is not supported by the unit. Bit rate (data flow per time unit)•
The system supports MP3 data with bit rates of 32 to 320 KB/s as well as MP3
data with variable bit rates.•
The indicated playing time data with variable bit rates is not reliable.
Up
Up
Up
Extras
Repeat track
Repeat folder
MIX
ExtrasMix all
Mix folder
b MixExtras
Scan
bScan
A10
s36c.b.book Page 20 Thursday, April 9, 2009 2:50 PM

Range selector key MEDIA
21
Note
For the correct display of the specific characters in Czech in ID3 day (name of the artist, the album and the track), the text
must correspond to
the standard ID3°V2
and the UTF coding.Playing sequence of MP3 data, WMA data and folders
The unit plays the MP3 data stored on
a data carrier in a certain sequence
⇒fig. 11
.
The illustration shows an example of a
typical MP3 CD cont
aining the titles
(Tracks
?), folder (Folder
>) and sub-folder. When settin
g up, you can stipulate if
MP3 data from all folders and sub-folders can be played.External sources*External sources - Overview
Fig. 11 Possible structure of a MP3 CD.
Fig. 12 Socket MDIFig. 13 Menu of the audio source via the multimedia socket MDI
s36c.b.book Page 21 Thursday, April 9, 2009 2:50 PM

Range selector key NAV (Navigation)
25
The GPS satellites will not be able to reac
h the aerial once you are in a tunnel or
underground garage. The unit will orie
ntate itself via the wheel sensors.
Note
All dtns. (country-, village-, road-, spec
ial destination names) must be entered
including
all country specific (or language-spe
cific for points of interest) special
characters.Navigation data, navigation CD and memory cardInserting the navigation CD – Push a navigation CD with the written
side facing up as far as possible
into the CD case until it is automatically drawn in.
– If you wish to take out the navigation CD, press the button . Update navigation data – If the data of the navigation CD is
not
identical to the data on the SD
card, a corresponding message will be displayed.
– Press on the function key to overwrite the data stored on the
SD card with the data
from the navigation CD.
Store the navigation data from the navigation CD onto the memory card – Push a navigation CD with the written
side facing up as far as possible
into the CD case until it is automatically drawn in.
– Push the memory card into the card case . – Press the range selector key and while in the main menu
Navi-
gation
, press the range selector key .
– Select the function key using the menu control
button and then press the function keys and .
The navigation data can be stored ei
ther on the CD or on the SD card.
If an SD card with navigation data of the
same country as on the CD is inserted in
the unit (however the data on the CD correspond to a newer version), a question is displayed after inserting the CD asking if the data should be overwritten with the new version or if only the data of th
e CD should be used for navigating.
If an SD card is inserted with the cards
of other countries than the card contained
on the CD, a question is displayed asking
if the data on the CD should be added
onto the SD card or if only the
data of the CD should be used.
You can copy data from seve
ral navigation CDs onto an SD card. The navigation
data on the SD card are automatically li
nked by the navigation system. For this
reason, we recommend to use an SD card
with sufficient memory capacity. A
memory capacity of approx. 4°
GB is necessary in order to copy the navigation data
of Western Europe. Using the data of a navigation CD for a short period of time If you only drive for short
periods through an area which is not stored on the SD
card, insert the navigation CD for the driven area. Up to date navigation data and new navigation CD Road guidance is subject to
constant changes (e.g. new streets, changes of street
names and house numbers). A navigation CD
is a huge data store, which unfortu-
nately will not be up to date after a certai
n time. This can lead to complaints during
route guidance. It is for this reason that you must regula
rly update the navigation data on your unit
with a current navigation CD. Remaining function buttons The following function buttons are only active
if a navigation CD is inserted in the
unit and the memory card
contains navigation data.
•
- displays information regarding the navigation CD
(area and version number
of the navigation CD);
•
- displays information regarding the stored navigation
data and their volume;•
- opens the menu with which you can delete the navi-
gation data on the memory card;
š
Install
A12
NAV
SETUP
Data base navigation
A10
Install data
Start
Show CD data informationShow SD data informationDelete SD navigation data
s36c.b.book Page 25 Thursday, April 9, 2009 2:50 PM

Range selector key NAV (Navigation)
26
•
- activates the storage of the navigation data from the navigation CD
onto the memory card.
Note
•
Copying a navigation CD can last up to
one hour, during the copying the navi-
gation functions (route guidance, map di
splay) cannot be used, the mode TRAFFIC
(traffic report) as well as the MP3 play func
tion of the SD card are not available. In
the menus
Radio
and
Media
, the symbol of the SD card is displayed on the top left
during the copying
H.
•
Do not remove the SD card from the uni
t during the copying of the data from
the navigation CD onto the SD card.Main menu Navigation
– Press the range selector key . The last opened menu in the navi-
gation will be displayed.
– If the main menu
Navigation
is n ot displayed, press o nce ag ain on the
range selector key .
Function keys in the main menu
Navigation
Address
- serves as address entry via an input mask for selecting a destination
address.
Destination memory
- serves for opening the stored destinations.
Last destins.
- serves for opening the last destinations.
Filling stations
- serves for opening the list of close-by filling stations.
Parking places
- serves for opening the list of close-by parking places.
Point of interest
- opens a search mask to search for a point of interest. To
search for an area, you can enter the current position or a random town
.
Home addr.
- for starting the route guidance to the destination which
is stored as home address.
Install data
BAT-20H1083
Fig. 14 Main menu Naviga- tion
BAT-20H1128
Fig. 15 Map display
NAV
NAV
$0!
Here
To w nHome addr.
s36c.b.book Page 26 Thursday, April 9, 2009 2:50 PM

Range selector key NAV (Navigation)
27
Destination entrySelecting a destination addressPress on the function key
Address
while in the main menu
Naviga-
tion
.
Selecting a destination address – Open the input masks (country, vi
llage, street, house number) for
selecting the destination address. A destination address must always be selected in the displayed sequence, first of all the country, then the town and so on.
– If the information is sufficent for route guidance, the function key
will be active.
Selecting a stored destinationStarting a route guidance
to a stored “Home address”
– Press on the function key while in the main menu
Navi-
gation
. If a home address has been st
ored, the unit will change to the
map display and the route guidance will start automatically.
Start route guidance to one
of the stored destinations
– Press the function key
Destination memory
or
Last destins.

while in the main menu
Navigation
. A list of the manually stored
destinations or the list of the
last destinations is displayed.
Select filling station or parking place– Press the function key
Filling station
or
Parking place
while in
the main menu
Navigation
, a list of the surrounding filling stations or
parking places is displayed.
– Press one of the displayed destin
ations. The unit will change to the
map display and the route guidance to this travel destination will start automatically.
– In order to display the detailed information about the destination,
press the function key .
– Start a route guidance by pressing the function key .Selecting a point of interest as a travel destinationDetermining the search area – Press the function key
Point of interest
while in the main menu
Navigation
.
– In order to determine the search area where you intend to search for
a point of interest, either choose the current position or a town centre .
Selecting a point of interest category – A search mask opens for selecting
the point of interest by means of
entering a “keyword” or a word which is part of the name for the point of interest. The point of interest is searched for within a surrounding area of 75 km.
– You can enter as a “keyword” e.g hotel, stadium, food or a part of a
name for a point of interest e.g rooster, lake.
– Pay attention to the correct entry of the “keyword” (including special
characters).

Finish
Home addr.
$


0
Details
Start

Here
To w n
s36c.b.book Page 27 Thursday, April 9, 2009 2:50 PM

Range selector key NAV (Navigation)
28
Starting the search – If you have completed your entries in the search mask, press on the
function key . A pop-up window will open and the search for the points of interest, which correspond to the entry, will start.
– The surrounding area where the points of interest are searched for is
displayed and continues to increase.
– If you press on the function key the search will be terminated
without a display.
– From the moment when all the points of interest are found, which
correspond to the entered text, they are displayed in the list.
– T h e s e a rc h e x t e n d s u p t o a d i s t a n c e o f a p p ro x . 7 5 k m f ro m t h e e n t e re d
position. You can interrupt the search of the displayed distance by pressing the function key .
– When the search has ended, the function key changes to the
function key .
Selecting a point of interest from the search results – Selecting the menu point from the list of the points of interest found,
starts the route guidance.
– If several points of interest were found, they will first of all be displayed
in a list. At the top of the list you ca
n find the points of interest closest
to the entered search area (distance and direction information refer to linear distance).
– If you press the function key , the details for the point of
interest are displayed. A route guidance is started after pressing the function key .
– In the list of the points of interest
or in the display of the details for a
destination, you can store the point of interest in a destination memory by pressing the function key .
Destination memoryStore last destinations– Press on the function key
Last destins.
while in the main menu
Navigation
.
– Press one of the displayed destinations. The unit will change to the
map display and the route guidance to
this travel destination will start
automatically.
– If you press the function key , the detailed information for the
destination is displayed.
– If you wish to store a destination, press on the function key .Store destinations in the destination memory– If you press the function key , an input mask for entering the
destination name opens.
– After entering the destination
name, press the function key .
– If you wish to change the destination name, press the function key
and select your ow
n destination name.
Edit stored destinations– Press the function key
Destination memory
while in the main
menu
Navigation
. A list of the manually stored destinations in the
destination memory is displayed.
– Press one of the displayed destinations. The unit will change to the
map display and the route guidance to
this travel destination will start
automatically.
Search
Abort
Stop
Stop
Details
Details
Start
Store

Details
Store
Store
OK
Delete

s36c.b.book Page 28 Thursday, April 9, 2009 2:50 PM

Range selector key NAV (Navigation)
29
– If you press the function key , the detailed information for the
destination is displayed. Yo
u can modify the entry here.
– If you wish to change the destination name, select the menu point
.
– A route guidance to the displayed destination is started with the func-
tion key .
– If you press the function key , the destination is deleted.Store additional wind
ow and “Flag dtns.”
Display additional window – The additional window open
s by pressing the button .
– If the route guidance is not active, the additional window opens with
details for the current position.
– If the route guidance is active, the additional window for the travel
destination opens.
Store flag dtns. – If you press the function key in the additional window, the
current position is stored as “Flag dtns.”.
– Only one destination can be stored in the destination memory under
“Flag dtns.”. If the “Flag dtns.” is
not renamed, it is overwritten by
renewed pressing of the function
key . If you wish to keep a
stored “Flag dtns.”, you must rename it.
Rename flag dtns. – Press the function key
Destination memory
while in the main
menu
Navigation
.
– Select “Flag dtns.” in the list.– Press the function key and then the function key . An
input mask opens in which you can ed
it the name of the “Flag dtns.”.
Additional window for the current position You can use the menu control button to display further information.•
Position;
•
latitude and longitude;
•
height (if at least 4 satellites are available);
•
GPS status (GPS_FIX - the position can
be determined, GPS_FIX_3D - the height
can be determined);
Details
Name
Start
Delete
BAT-20H1084
Fig. 16 Additional window: Display of the details for the current position
BAT-20H1123
Fig. 17 Flag dtns.
º
Flag dtns.
Flag dtns.
Details
Name
A10
s36c.b.book Page 29 Thursday, April 9, 2009 2:50 PM

Range selector key NAV (Navigation)
30
•
The number of useable and tracked satellites to be received (the number of
useable satellites determines the GPS status).Delete destinations in the destinat
ions memory or in the list of
the last destinations– Press the button while in a random menu of the
Navigation
.
– You can select the function key using the
menu control button .
– In the pop-up window, you can dele
te all manually or automatically
stored destinations or only the la
st destinations using the function
keys or .
Store or edit your home addressStoring the current position as a home address – Press on the function key while in the main menu
Navi-
gation
.
– If your home address has not yet been stored, confirm the following
question with the function key .
– Press on the function key and your current position is stored
as home address.
Editing a stored home address – If your home address has already
been stored, the automatic route
guidance starts after pressing the function key .
– If you wish to change your home address, press the button and
then the menu point while in the menu Navigation
.
Route guidanceEntering a stopover destinationIf, in addition to the displayed travel
destination, a stopover destination is
added, proceed as follows. The stopover destination can only be entered when starting the route guidance. – Select the destination and start the route guidance.– Press on the range selector key to change into the main menu
Navigation
.
– Select a destination and start the route guidance. – If you wish to store the newly ente
red destination as a stopover desti-
nation, press the function key .
– If you wish to end the route guidance which has started, press the
function key .
Only one destination and one
stopover destination can be entered during the route
guidance. A corresponding navigation announcement
sounds when reac
hing the stopover
destination. The route guidance is renewe
d after a few seconds. Then you can re-
enter a new stopover destination. If you enter a new stopover destination be
fore reaching the original destination,
you must decide if you wish to overwrite the “old” stopover destination with the “new” stopover destination.Route options The menu
Route options
is used to determine th
e criteria according to
which a route is to be calculated and
what types of destinations you wish
to allow for the route calculation. Th
e route options can also be changed
during a route guidance.
SETUP
Delete destinations memory
A10
All dtns.
Last destins.
Home addr.
Ye s
Position
Home addr.
SETUP
Enter home address
NAVStopover
New destination
s36c.b.book Page 30 Thursday, April 9, 2009 2:50 PM