2009 Seat Exeo gearbox

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand, that
at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no rig ht at all
may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or omis-
sion, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the "Copyright" Act.
All rights on changes are reserved.
This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.07.09
Vehicle data
1.
2.
3.
4.
5.
1. Vehicle identification number
2. Identification numbers
Type/Model/Engine
Gearbox/Finishes
3. Identification letters
Engine/Gearbox/Paintwork
Equipment
4. Identification codes of variable equipment
5. Consumption (l/100 km) / CO
2Emissions (g/km) urban
Consumption (l/100 km) / CO
2Emissions (g/km) motorway
Consumption (l/100 km) / CO
2Emissions (g/km) mixed
N ote
• We recommend that you visit an Authorised SEAT Service Centre when-
ever you require any work done on your vehicle.
• SEAT regularly communicates to its Authorised Service Centres new
product developments. They have tools and highly specialized person-
nel who can guarantee the safety and performance of your vehicle.
• Scrupulously following the General Programme for Inspection
Services in Authorised SEAT Service Centres will ensure you maintain
greater value for your vehicle.
Portada PM_interior.qxd:Maquetacion 17/7/09 13:10 Página 3

SEAT maintenance programme
12Every 7,500 km (5,000 miles)•Engine oil and oil filter: Replace (only engines using high sulphur content
diesel fuel).Every 30,000 km (20,000 miles) or every 2 years•Dust and pollen filter: Replace.Every 60,000 km (40,000 miles)•Automatic gearbox: Change oil.•Fuel filter: Change (only diesel engines)Every 60,000 km (40,000 miles) or every 4 years•Air filter: Clean casing and replace filt er element (only diesel CR engines).•Spark plugs : Replace (except 2.0 TFSI engines).Every 90,000 km (60,000 miles) or every 6 years•Spark plugs : Replace (only 2.0 TFSI engines).•Air filter: Clean casing and replace filter element (only petrol engines).
At 90,000 km (60,000 miles) the first time, then every 30,000 km (20,000 miles)•Timing belt: Check condition and replace as necessary (only 1.6 MPI
petrol engines up to 180,000 km (120,000 miles)Every 180,000 km (120,000 miles)•Timing belt: Replace (diesel Common Rail engines and petrol engines).Every 180,000 km (120,000 miles) the first time, then every 30,000 km (20,000 miles)•Particulate filters Check (only diesel Common Rail engines).Every 360,000 km (240,000 miles)•Camshaft timing belt tension roller: Replace (TDI Common Rail engines).After 3 years the first time around, then every 2 years•Brake fluid: Replace
PM Exeo_EN Seite 12 Montag, 31. August 2009 3:46 15

Other services available
14Other services availableLegal Inspection ServiceThe legal inspections must be carried out at the intervals
prescribed.Many countries have legal requirements obliging owners to have their vehicle
tested at specified intervals for safety for the user and for other traffic, as well
as ensuring that vehicle exhaust emissions meet the countries' regulations.
These revisions must be overseen by officially certified centres.
Your Authorised Ser vice Centre can advise of the inspections required by law,
and can check your vehicle in the course of an Inspection Service. This will
save you both time and money.
The Authorised Service Centre can also carry out the inspections required by
law at the client's request.
Even if you do not wish to take advantage of this service and decide to take
your car to an officially certified centre for this check, we recommend that you
speak to the person in charge of your Authorised Service Centre first.
This person will be able to inform you of any points that require attention so
that your car does not fail the test and have to be re-tested.Approved spare partsAll parts of your vehicle have been approved by SEAT, especially those parts
on which your safety depends. For this reason, the parts used in the
Programmed Inspection Services or in any vehicle repair must correspond
exactly to the manufacturer-defined requirements. The approved SEAT spare parts have been designed especially for your vehicle. For this reason, we
recommend that Genuine approved SEAT spares are always used.
In the Authorised SEAT Service Centres you will find the most important
approved spare parts. If in an exceptional case, the necessary parts are not in
stock, they can, in general, be obtained swiftly.
The SEAT Service Centres in the EU provide a 24 month warranty
1) for
Approved Spare parts from the date they are fitted or sold. It is therefore
advisable to retain the original invoice from the Authorised Service Centre as
proof of the existing warranty.
More information about this may be obtained from your Authorised Service
Centre.
Approved SEAT exchange partsThe approved SEAT exchange parts, conforming to the manufacturer’s
requirements, constitute an additional service at your disposal, offering you
the possibility to replace entire assemblies, the most common being: the
lightened engine, gearboxes, cylinder heads, control units, electrical
elements, etc.
Of course these are Approved parts and, as they have the same class as the
manufacturer parts, they share the same SEAT approved spare parts warranty.
However, these parts are considerably cheaper as they are factory-recondi-
tioned used parts. Keep the invoice for the approved SEAT exchange parts as
proof of the start of the existing warranty.1)The warranty is not available for all export markets. For more information, please ask
your Authorised SEAT Service Centre.
PM Exeo_EN Seite 14 Montag, 31. August 2009 3:46 15

Warranty
16WarrantyFault-free operation warrantyAccording to the clauses of the warranty applied to SEAT vehicles in the sales
contract, A fault-free operation warranty of 2 years in accordance with legal
requirements
2) 3) is provided from the date of delivery.
We hope that it is understood that natural wear as well as damage caused by
the abuse of vehicle performance through inappropriate use or by unaccept-
able modifications are excluded from the warranty. The warranty is also
invalid when the vehicle is damaged by the use of parts and accessories that
are not SEAT approved or damage due to ignoring the maintenance and repair
requirements.
Paintwork and body warrantyAuthorised Service Centres provide a warranty on bodywork
and paintwork for vehicles sold in the EU.In addition to the warranty conditions for brand new SEAT vehicles (as
detailed in the purchase contract), a defined period warranty is also provided
covering paintwork and bodywork rusting:•3 year paintwork warranty following delivery date (except the Alhambra
model).
•12 years from the date of delivery against bodywork through-rusting (6
years for the Alhambra).
I f , h o w e v e r, t h i s t y p e o f d a m a g e s h o u l d o cc u r, i t w i l l b e r e p a i r e d f r e e o f ch a r g e
including parts and labour by any SEAT Authorised Service Centre in Europe.
Warranty claims will not be accepted in the following circumstances:•if damage is caused by external influence or carelessness, or•if damage to the body is not repaired promptly and appropriately in
accordance with the manufacturer's instructions using genuine, approved
spare parts and materials, or•if perforation rusting is caused by the use of non-genuine parts and mate-
rials for body repairs and if these repairs were not carried out in accordance
with the manufacturer's instructions.
If the bodywork is repaired or painted, your Authorised Service Centre will
certify your warranty against through-rusting for the repaired sections.Approved SEAT exchange partsThe approved SEAT exchange parts, conforming to the manufacturer’s
requirements, constitute an additional service at your disposal, offering you
the possibility to replace entire assemblies, the most common being: the
lightened engine, gearboxes, cylinder heads, control units, electrical
elements, etc.
Of course these are Approved parts and, as they have the same class as the
manufacturer parts, they share the same SEAT approved spare parts warranty.
2)The warranty is not available for all export markets. For more information, please ask
your Authorised SEAT Service Centre.3)As well as the legally required warranty, SEAT offers an extended warranty to their cli-
ents in some European countries. The specific conditions of this extended warranty
are detailed in the vehicle sales contract.
PM Exeo_EN Seite 16 Montag, 31. August 2009 3:46 15