29A-18
DRIVESHAFTS
Front right-hand driveshaft gaiter, gearbox side: Removal - Refitting
JB1 or JH1 or JH3 or JR5
29A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
aRemove:
-the engine undertray,
-the front right-hand wheel (see Wheel: Removal -
Refitting) (35A, Wheels and tyres),
-the front right-hand driveshaft (see 29A, Drive-
shafts, Front right-hand driveshaft: Removal -
Refitting, page 29A-8) . Special tooling required
Tav. 1168"Clic" type clip pliers for drive-
shafts with a thermoplastic
gaiter.
Tav. 1784Pliers for the driveshaft gaiter
collar.
Equipment required
par ts washer
108557
2943
(1) Big securing clip
(2) Small secur ing clip
(3) Driveshaft gaiter
(4) Yoke sleeve
(5) Spider
(6) Cup
(7) Cup spring
(8) Driveshaft
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
29A-23
DRIVESHAFTS
Front left-hand driveshaft gaiter, gearbox side: Removal - Refitting
JH3 or JR5
29A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the front left-hand driveshaft (see 29A,
Driveshafts, Front left-hand driveshaft: Removal
- Refitting, page 29A-2) .
II - REMOVAL OPERATION
aCut the big securing clip (1) and the small securing
clip (2) using cutting pliers or a metal saw, taking
care not to damage the yoke sleeve or the drive-
shaft. Special tooling required
Tav. 1168"Clic" type clip pliers for drive-
shafts with a thermoplastic
gaiter.
Equipment required
par ts washer
109401
(1) Big securing clip
(2) Small secur ing clip
(3) Driveshaft gaiter
(4) Driveshaft yoke sleeve
(5) Lock r ing
(6) Spider
(7) Cup
(8) Cup spr ing
(9) Deflector
(10) Driveshaft
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
128413
128414
