2009 RENAULT TWINGO ignition

21B -109
MR-413-X44-21B000$767.mif
V2
SEQUENTIAL GEARBOX
Fault finding - Interpretation of parameters
Vdiag No: 04
21B
PR014
GEARBOX INPUT SPEED
PARAMETER
DEFINITIONThis parameter indicates the rotation speed at the sequential gearbox input expressed
in rpm.
NOTESNone
Engine stopped, ignition on
PR014 = 0 rpm
In the event of a fault, consult the interpretation of fault DF251 “Gearbox input speed”.
Engine warm at idle speed and gearbox in neutral
PR014 ≈ PR006 "Engine speed"
In the event of a fault, consult the interpretation of fault DF251 “Gearbox input speed”.
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
BVRJH1_V04_PR014

21B-110
MR-413-X44-21B000$767.mif
V2
SEQUENTIAL GEARBOX
Fault finding - Interpretation of parameters
Vdiag No: 04
21B
PR015
CLUTCH POSITION
PARAMETER
DEFINITIONThis parameter indicates the position of the clutch cylinder expressed in mm.
NOTESNone
Engine stopped, ignition on
PR015 = 36 mm (new clutch)
In the event of a fault, consult the interpretation of fault DF068 “Clutch position sensor circuit”.
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
BVRJH1_V04_PR015

21B -111
MR-413-X44-21B000$767.mif
V2
SEQUENTIAL GEARBOX
Fault finding - Interpretation of parameters
Vdiag No: 04
21B
PR016
SELECTION POSITION
PARAMETER
DEFINITIONThis parameter indicates the position of the selection cylinder expressed in mm.
NOTESNone
Engine stopped, ignition on
The value of parameter PR016 will change depending on the gear engaged:
1: PR016 = 6 mm
2: PR016 = 6 mm
3: PR016 = 12 mm
4: PR016 = 12 mm
5: PR016 = 19 mm
R: PR016 = 19 mm
N: PR016 = 12 mm
In the event of a fault, consult the interpretation of fault DF069 “Selection position sensor circuit”.
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
BVRJH1_V04_PR016

21B-112
MR-413-X44-21B000$767.mif
V2
SEQUENTIAL GEARBOX
Fault finding - Interpretation of parameters
Vdiag No: 04
21B
PR017
ENGAGEMENT POSITION
PARAMETER
DEFINITIONThis parameter indicates the position of the engagement cylinder expressed in mm.
NOTESNone
Engine stopped, ignition on
The value of parameter PR017 will change depending on the gear engaged:
1: PR017 = 6 mm
2: PR017 = 18 mm
3: PR017 = 6 mm
4: PR017 = 18 mm
5: PR017 = 6 mm
R: PR017 = 18 mm
N: PR017 = 12 mm
In the event of a fault, consult the interpretation of fault DF070 “Engagement position sensor circuit”.
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
BVRJH1_V04_PR017

21B-113
MR-413-X44-21B000$767.mif
V2
SEQUENTIAL GEARBOX
Fault finding - Interpretation of parameters
Vdiag No: 04
21B
PR018
HYDRAULIC PRESSURE
PARAMETER
DEFINITIONThis parameter indicates the value of the pressure in the hydraulic circuit expressed
in bar.
NOTESNone
Engine stopped, ignition on
The pressure value is measured by the pressure sensor.
Using this information, the computer will activate or deactivate the pump to regulate the pressure.
40 < PR018 < 50 bar
In the event of a fault, consult the interpretation of faults DF065 “Pump relay circuit”, DF166 “Pressure sensor
circuit”, DF252 “Pump relay”, DF180 “Hydraulic pump” and DF259 “Pressure accumulator”.
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
BVRJH1_V04_PR018

21B-114
MR-413-X44-21B000$767.mif
V2
SEQUENTIAL GEARBOX
Fault finding - Interpretation of parameters
Vdiag No: 04
21B
PR095
CLUTCH TEMPERATURE
PARAMETER
DEFINITIONThis parameter indicates the temperature of the clutch system expressed in ˚C.
NOTESNone
Engine stopped, ignition on
The clutch temperature will change depending on the driving style of the vehicle (sporty driving, holding the
vehicle on an incline, etc.).
When PR095 ≥ 248 ˚C, the buzzer is activated.
Check the clutch is correctly programmed (see replacement of components).
In the event of a fault, consult the interpretation of fault DF254 “Clutch temperature”.
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
BVRJH1_V04_PR095

21B-115
MR-413-X44-21B000$767.mif
V2
SEQUENTIAL GEARBOX
Fault finding - Interpretation of parameters
Vdiag No: 04
21B
PR096
CLUTCH PROGRESSIVITY
PARAMETER
DEFINITIONThis parameter indicates the progressivity of the clutch.
NOTESNone
Engine stopped, ignition on
3000 < PR096 < 9000
Default value: PR096 = 7500, in this case, program the clutch progressivity (see Replacement of
components).
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
BVRJH1_V04_PR096

21B-116
MR-413-X44-21B000$767.mif
V2
SEQUENTIAL GEARBOX
Fault finding - Interpretation of parameters
Vdiag No: 04
21B
PR105
VEHICLE SPEED
PARAMETER
DEFINITIONThis parameter indicates the vehicle speed expressed in mph (km/h).
NOTESNone
Engine stopped, ignition on
PR105 = 0 km/h
If not correct, run fault finding on the ABS/ESP system (see 38C, Anti-lock braking system).
If the fault is still present, contact Techline.
Road test
Carry out a road test.
Check the consistency between the parameter value PR038 "Vehicle speed" in the domain of the ABS
computer and the speed displayed on the instrument panel.
If not correct, run fault finding on the ABS/ESP system (see 38C, Anti-lock braking system).
If the fault is still present, contact Techline.
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
BVRJH1_V04_PR105