21B -105
MR-413-X44-21B000$708.mif
V2
21B
SEQUENTIAL GEARBOX
Fault finding - Parameter summary table
Tool parameter Diagnostic tool title
PR006Engine speed
PR008Computer feed voltage
PR010Clutch wear
PR014Gearbox input speed
PR015Clutch position
PR016Selection position
PR017Engagement position
PR018Hydraulic pressure
PR095Clutch temperature
PR096Clutch progressivity
PR105Vehicle speed
PR106Effective engine torque
PR107No reduction engine torque
PR145Engine coolant temperature
PR148Closed position of clutch
PR152Anticipated engine torque
PR153Slow torque setpoint
PR154Rapid torque setpoint
Vdiag No: 04
MR-413-X44-21B000$708.mif
21B-118
MR-413-X44-21B000$767.mif
V2
SEQUENTIAL GEARBOX
Fault finding - Interpretation of parameters
Vdiag No: 04
21B
PR145
ENGINE COOLANT TEMPERATURE
PARAMETER
DEFINITIONThis parameter indicates the coolant temperature in ˚C.
NOTESNone
Engine stopped, ignition on
PR145 = 20 ˚C in default mode
Compare the value of parameter PR145 with the value measured by the coolant temperature sensor in the
domain of the injection computer (see 17B, Petrol injection).
If not correct, run a multiplex network test (see 88B, Multiplex).
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
BVRJH1_V04_PR145
