56A-6
EXTERIOR EQUIPMENT
Scoop under the scuttle panel grille: Removal - Refitting56A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the windscreen wiper arms (see Windscreen wi-
per arm: Removal - Refitting) (MR 411 Mechani-
cal, 85A, Wiping - Washing),
-the scuttle panel grille (see 56A, Exterior equip-
ment, Scuttle panel grille: Removal - Refitting,
page 56A-1) .
aRemove the cap on the shock absorber cup.
aRemove the shock absorber cup using the (1) , hol-
ding the shock absorber rod using the (2) .II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the bolts (3) .
aProtect the lower section of the windscreen using
masking tape.
121497
121498
121499
56A-7
EXTERIOR EQUIPMENT
Scoop under the scuttle panel grille: Removal - Refitting56A
aRemove the scoop under the scuttle panel grille (4) ,
(5) , (6) and (7) .
REFITTING
I - REFITTING PREPARATION OPERATION
a
II - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the scuttle panel grille scoop,
-the bolts (3) .
III - FINAL OPERATION.
aRefit the shock absorber cup using the (1) , holding
the shock absorber rod using the (2) .
aSeal the cap on the shock absorber cup using mas-
tic (part no.: 77 01 423 330).
aRefit:
-the cap on the shock absorber cup.
-the scuttle panel grille (see 56A, Exterior equip-
ment, Scuttle panel grille: Removal - Refitting,
page 56A-1) ,
-the windscreen wiper arms (see Windscreen wi-
per arm: Removal - Refitting) (MR 411 Mechani-
cal, 85A, Wiping - Washing).
121500
121501
121502
Note:
It is essential to replace the foam strips which
seal the scoop under the scuttle panel gr ille. The
foam strips are available from the Parts Depart-
ment.
