86A-104
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 17 Problem pairing my telephone to the radio
NOTESUse the Wiring Diagrams Technical Note for Clio III or New Twingo.
Consult the list of compatible phones on
Renault.net.
Is the customer's phone in the list of compatible
phones authorised by Renault?Explain to the customer that the phone is not
compatible with this radio.
Is it possible to pair another compatible phone
to this radio?Contact the Techline.
Is it possible to pair the customer's phone to
this radio when outside?The problem disappears.
Is the customer's phone working properly?Explain to the customer that the phone must
be replaced.
Contact the Techline.
NO
YES
NO
YES
YES
NO
NO
YES
R208_V64_ALP17
86A-105
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 18 Fault when using the mobile connectivity terminal
NOTESSee Clio III or New Twingo wiring diagrams.
ALP 18 is used to run fault finding on the mobile connectivity terminal if a mobile
connectivity computer is not fitted on the vehicle.
In a vehicle equipped with a navigation computer, the terminal is connected to the
navigation computer, component code 662. Otherwise, it is connected to the radio,
component code 261.
Is the mobile device connected to the mobile connectivity
terminal switched on and is the volume sufficient?Increase the volume of the
mobile device.
Does the customer's mobile device operate correctly with
earphones that are in good condition?Explain to the customer that the
mobile device is defective.
Check the condition (appearance check) of the cable
connecting the mobile device to the analogue terminal.
Explain to the customer that the
cable of the mobile device is
faulty. Are the checks correct?
NO
YES
NO
YES
NO
YES
A
R208_V64_ALP18
