2009 RENAULT TWINGO RS Speaker

86A-61V1 MR-413-X44-86A150$130.mif
RADIO
Fault finding – Conformity check86A
R2-08
Vdiag No.: 64
FUNCTION: MULTIMEDIA
SUB-FUNCTION: AUDIO
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool.
The values shown in this conformity check are given as a guide.
Application condition: engine off, ignition on.
FunctionParameter or status checked
or actionDisplay and notes Fault finding
Audio testAC004:Test right front
speaker line
This command is used to
successively activate
each speaker.In the event of an
inconsistency, consult the
interpretation of fault DF001
Front right-hand speaker.
AC005:Test left front
speaker lineIn the event of an
inconsistency, consult the
interpretation of fault DF002
Front left-hand speaker.
AC006:Test right rear
speaker lineIn the event of an
inconsistency, consult the
interpretation of fault DF003
Rear right-hand speaker.
AC007:Test left rear
speaker lineIn the event of an
inconsistency, consult the
interpretation of fault DF004
Rear left-hand speaker.
Microphone testAC010:Microphone testThis command is for
testing microphone
operation.
NOTE:
Test in a quiet place.
Command AC010 is
inactive if the auxiliary
source is selected.
Example: presence of
a USB key.In the event of an
inconsistency, consult the
interpretation of fault DF056
Microphone.

86A-69V1 MR-413-X44-86A150$170.mif
86A
R2-08
Vdiag No.: 64
Tool
commandDiagnostic tool title Description
RZ003:Fault memoryThis command is used for clearing the stored
faults from the computer.
AC004:Test right front speaker line
These commands are used to carry out
a listening test for each speaker.
NOTE:
These commands are not usable if the
anti- theft code is not entered. AC005:Front left-hand speaker lines test
AC006:Rear right-hand speaker lines test
AC007:Test left rear speaker line
AC010:Microphone testThis command is for testing microphone
operation.
NOTE:
Command AC010 is inactive if the auxiliary
source is selected.
Start by setting the radio to CD or radio
mode and run command AC010.
This command is not usable if the anti-theft
code is not entered.
AC013:CD ejectionThis command is used for testing CD ejection
from the CD player.
Set the radio to CD mode and run command
AC013.
SC002:Computer configuration See Configuration and Programming.
RADIO
Fault finding – Command summary table

86A-70V1 MR-413-X44-86A150$180.mif
86A
R2-08
Vdiag No.: 64
NOTESOnly refer to the customer complaints after performing a complete check using
the diagnostic tool.
NO DIALOGUE WITH THE COMPUTER ALP1
THE RADIO BEEPS EVERY 2 SECONDS ALP2
THE RADIO DOES NOT OPERATE WHEN THE ON BUTTON IS PRESSED ALP3
RADIO IS SWITCHED ON, BUT THE DISPLAY DOES NOT WORK ALP4
THE RADIO CONTROL SATELLITE DOES NOT OPERATE OR OPERATES POORLY ALP5
RADIO RECEPTION FAULT ALP6
THE VOLUME DOES NOT INCREASE WITH THE VEHICLE SPEED. ALP7
BACKLIGHTING DOES NOT CHANGE WHEN THE VEHICLE LIGHTS ARE
SWITCHED ONALP8
THE RADIO DOES NOT PLAY THE CD IN ORDER OR SKIPS SONGS ALP9
SOUND FAULT FOR A SPEAKER OR TWEETER (REGARDLESS OF SOURCE) ALP10
THE RADIO AND/OR THE DISPLAY REMAINS LIT FOR 1 MINUTE AFTER LOCKING THE
VEHICLE (ON NEW TWINGO ONLY)ALP11
THE CD DOES NOT EJECT ALP12
A RADIO BUTTON(S) NO LONGER OPERATES OR FUNCTIONS POORLY ALP 13
POOR SOUND (REGARDLESS OF THE SOURCE) ALP14
TELEPHONE COMMUNICATION IS POOR ALP15
VOICE RECOGNITION DOES NOT WORK OR DOES NOT WORK PROPERLY ALP16
PROBLEM PAIRING MY TELEPHONE TO THE RADIO ALP17
FAULT WHEN USING THE MOBILE CONNECTIVITY TERMINAL ALP18
RADIO
Fault finding – Customer complaints

86A-83
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 3 The radio does not operate when the ON button is pressed
NOTESNone.
Press the ON button of the radio.
Switch on the lights
Does the radio backlighting operate?See ALP1 No dialogue with the computer.
Is the volume 0 or on pause?Increase the volume or restart play.
Is the front/rear balance set completely to
the rear speakers?Set the front/rear balance to 0.
Are the condition and connections of the
speaker connector and speaker connections
in order?Reconnect or repair the connector(s), otherwise
replace the wiring. (see Technical Note 6015A,
Repairing electrical wiring, Wiring:
Precautions for repair).
See ALP 10 Sound fault for a speaker or
tweeter.
NO
YES
YES
NO
YES
NO
NO
YES
R208_V64_ALP3

86A-94
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 10 Sound fault for a speaker or tweeter (regardless of source).
NOTESUse the Wiring Diagrams Technical Note for Clio III or New Twingo.
Run a command for each speaker using AC004 Front
right-hand speaker line test, AC005 Front left-hand
speaker line test, AC006 Rear right-hand speaker line
test, AC007 Rear left-hand speaker line test.
Did the tests successfully identify which speaker(s)
is the source of the problem? Repeat the procedure, and if the fault
still does not appear, contact the
Techline.
Check the speaker or tweeter which is the source of the
problem (visual appearance and mechanical: presence
of foreign bodies, mounting and condition of the
membrane).If possible, repair the incorrect
component(s), otherwise replace the
faulty speaker(s), component codes
1597, 1598, 189 and 190 (see MR 392
(Clio III) or MR 411 (New Twingo),
86A, Radio, Front speakers:
Removal - Refitting or (see MR 392
(Clio III) or MR 411 (New Twingo),
86A, Radio, Rear speakers:
Removal - Refitting) and/or the faulty
tweeter(s), component codes 365, 366
(see MR 392 (Clio III) or MR 411
(New Twingo), 86A, Radio, Tweeter:
Removal - Refitting). Are the checks correct?
NO
YES
NO
YES
A
R208_V64_ALP10

86A-95
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 10
CONTINUED
Check the continuity, insulation and absence of
interference resistance of the connections or
component(s) in question:
•34A between components 261 and 190,
•34B between components 261 and 190,
•34C between components 261 and 189,
•34D between components 261 and 189,
•34E between components 261, 365 and 1598
(left-hand drive) or 1597 (right-hand drive),
•34F between components 261, 365 and 1598
(left-hand drive) or 1597 (right-hand drive),
•34G between components 261, 366 and 1598
(right-hand drive) or 1597 (left-hand drive),
•34H between components 261, 366 and 1598
(right-hand drive) or 1597 (left-hand drive).
Are the checks correct?Replace the faulty speaker(s),
component codes 1597, 1598, 189 and
190 (see MR 392 (Clio III) or MR 411
(New Twingo), 86A, Radio,
Front speakers: Removal - Refitting
or see MR 392 (Clio III) or MR 411
(New Twingo), 86A, Radio, Rear
speakers: Removal - Refitting) and /
or the faulty tweeter(s), component
codes 365, 366 (see MR 392 (Clio III)
or MR 411 (New Twingo), 86A, Radio,
Tweeter: Removal - Refitting). If the connection or connections are faulty and there is
a repair procedure (see Technical Note 6015A,
Electrical wiring repair, Wiring: Precautions for
repair), repair the wiring, otherwise replace it.
Contact the Techline.
A
YES
YES
NO

86A-99
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 14 Poor sound (regardless of the source).
NOTESUse the Wiring Diagrams Technical Note for Clio III or New Twingo.
Run a command for each speaker using AC004 Front
right-hand speaker line test, AC005 Front left-hand
speaker line test, AC006 Rear right-hand speaker
line test, AC007 Rear left-hand speaker line test.
See ALP 10 Sound fault for
a speaker or tweeter.
Do the speakers and tweeter all emit sound?
Run command SC002 Computer configuration.
Is the sound still poor?The problem disappears.
Check the speakers and tweeters (visual and mechanical
appearance: presence of foreign bodies, mounting and
diaphragm condition).If possible, repair the incorrect
component(s), otherwise replace the
faulty speaker(s), component codes
1597, 1598, 189 and 190 (see MR 392
(Clio III) or MR 411 (New Twingo),
86A, Radio, Front speakers:
Removal - Refitting or see MR 392
(Clio III) or MR 411 (New Twingo),
86A, Radio, Rear speakers: Removal
- Refitting) and/or replace the faulty
tweeter(s), component codes 365, 366
(see MR 392 (Clio III) or MR 411
(New Twingo), 86A, Radio, Tweeter:
Removal - Refitting). Are the checks correct?
NO
YES
NO
YES
NO
YES
A
R208_V64_ALP14

86A-100
AFTER REPAIRCarry out another fault finding check on the system.
Deal with any faults.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 14
CONTINUED
Check the insulation and the absence of interference
resistance on the following connections:
•34A between components 261 and 190,
•34B between components 261 and 190,
•34C between components 261 and 189,
•34D between components 261 and 189,
•34E between components 261, 365 and 1598
(left-hand drive) or 1597 (right-hand drive),
•34F between components 261, 365 and 1598
(left-hand drive) or 1597 (right-hand drive),
•34G between components 261, 366 and 1598
(right-hand drive) or 1597 (left-hand drive),
•34H between components 261, 366 and 1598
(right-hand drive) or 1597 (left-hand drive).If the connection or connections are
faulty and there is a repair procedure
(see Technical Note 6015A,
Electrical wiring repair, Wiring:
Precautions for repair), repair the
wiring, otherwise replace it.
Are the checks correct?
Is the fault located on a component (speaker,
tweeter)?Replace the faulty speaker,
component codes 1597, 1598, 189
and 190 (see MR 392 (Clio III) or
MR 411 (New Twingo), 86A, Radio,
Front speakers: Removal - Refitting
or see MR 392 (Clio III) or MR 411
(New Twingo), 86A, Radio, Rear
speakers: Removal - Refitting) and/
or replace the faulty tweeter(s),
component codes 365, 366 (see
MR 392 (Clio III) or MR 411
(New Twingo), 86A, Radio, Tweeter:
Removal - Refitting). Contact the Techline.
A
YES
NO
YES
YES
NO