2009 RENAULT TWINGO RS odometer

83A-12
MR-413-X44-83A000$168.mif
V5
INSTRUMENT PANEL
Fault finding - Operating diagram

Vdiag No.: 04, 08
83A
Output signals:
ABuzzer
BControlled warning lights:
–Seat belt reminder light
–Brake warning light
–Battery charge warning light
–Oil pressure warning light
–Coolant temperature warning light
–Airbag fault warning light
CFuel level display function
DOn-board computer
–Odometers
–Distance/time before service.
–Cruise control and speed limiter
–Clock (on entry level version)
–Exterior temperature display
ESequential gearbox display
FBacklighting
Dimmer
GSpeedometer
HDirect warning lights:
–Side light indicator light
–Dipped headlight indicator light
–Headlight indicator light
–Front fog light indicator light
–Rear fog light indicator light
–Direction indicator light

83A-21
MR-413-X44-83A000$280.mif
V5
83A
INSTRUMENT PANEL
Fault finding - Configuration
1. UNIT CONFIGURATIONS:
Procedure to be applied: Copy the values measured whilst reading LCXXX or consult ICM*.
2. PARAMETER SETTINGS:
*ICM (Shared World Information): available on Renault Net Configuration
reading numberConfiguration number Control Specification
LC029 CF149Gearbox type–Manual gearbox
–Sequential gearbox
LC049 CF138Type of fuel–PETROL
–DIESEL
LC051 CF140Distance unit–KM
–MILES
LC061 CF150Cruise control/speed limiter–WITH
–NONE
LC052 CF141Overspeed function - Arabia–WITH
–NONE
LC064 CF158Seat belt reminder buzzer–STATUS 1
–STATUS 2
–STATUS 3
LC011 CF038Dimmer present–YES
–NO
LC094 CF180External temperature–ABSENT
–PRESENT
LC098 CF181Electric power-assisted
steering–WITH
–NONE
LC053 CF142Electronic stability program
(ESP)–ABS/without ESP
–With ABS/ESP
–Without ABS/ESP
LC106 CF198OCS–WITH
–NONE
VP002Enter VIN
VP016Oil service and odometer
(miles-km)This command is used to enter the oil
service interval and frequency and
odometry in miles or km.
Only use this command if replacing the
instrument panel.

Vdiag No.: 04, 08
MR-413-X44-83A000$280.mif

83A-33
MR-413-X44-83A000$504.mif
V5
INSTRUMENT PANEL
Fault finding - Conformity check

Vdiag No.: 04, 08
83A
SUB FUNCTION: ODOMETRY IN KM
SUB FUNCTION: ODOMETRY IN MILES
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool.
The values shown in this conformity check are given as a guide.
Application conditions: Vehicle with + after ignition feed activated, engine
stopped.
FunctionParameter or status
checked or actionDisplay and notes Fault finding
Check the
general distance
travelled by the
vehicle in kmPR025:Odometry in kmDisplays the vehicle
distance in km.WITHOUT
Check the
distance before
oil service in kmPR005:Distance to next oil
service: current
value in kmDisplays the distance
remaining in kms before
the recommended oil
service.WITHOUT
Check the
interval between
each oil service
in kmPR007:Oil change
frequency in km.Initial oil service interval
in km.WITHOUT
FunctionParameter or status
checked or actionDisplay and notes Fault finding
Check the
general distance
travelled by the
vehicle in milesPR026:Odometer in milesDisplays the vehicle
distance in miles.WITHOUT
Check the
distance before
oil service
in milesPR023:Oil service
interval: current
value in milesDisplays the distance
remaining in miles before
the recommended oil
service.WITHOUT
Check the
interval between
each oil service
in milesPR024:Oil change
frequency in miles.Initial oil service interval in miles.