38C-64
MR-413-X44-38C000$893_eng.mif
V1
38C
ANTI-LOCK BRAKING SYSTEM
Fault finding - Customer complaints
NOTESOnly consult this customer complaint after a complete check with the
diagnostic tool.
FAULTS DETECTED ON BRAKING WITH ABS/BRAKING REGULATION
LOCKING OF ONE OR MORE WHEELS ALP 2
PULLING ALP 3
DRIFT ALP 4
UNEXPECTED ABS OPERATION AT LOW SPEEDS AND SLIGHT PEDAL
PRESSURE ALP 5
UNEXPECTED ABS OPERATION ON A POOR ROAD SURFACE ALP 6
UNEXPECTED ABS OPERATION WHEN SPECIAL EQUIPMENT
USED (CAR PHONE, CB, ETC.) ALP 7
EXTENSION OF BRAKE PEDAL TRAVEL FOLLOWING
REGULATION PHASE (WITH LEAKING PEDAL WHEN STARTING
REGULATION PHASE)ALP 8
SPONGY PEDAL ALP 9
BRAKE PEDAL VIBRATION ALP 10
NOISES FROM THE PUMP, PIPES OR HYDRAULIC UNIT ALP 11
OTHER CASES
NO DIALOGUE WITH THE ABS COMPUTER ALP 1
MK70 ABS
Vdiag No: 04
MR-413-X44-38C000$893_eng.mif
38C-72
MR-413-X44-38C000$940_eng.mif
V1
ANTI-LOCK BRAKING SYSTEM
Fault finding - Fault Finding Chart
MK70 ABS
Vdiag No: 04
38C
ALP 7Unexpected ABS operation when using special equipment
(car phone, CB, etc.)
NOTESOnly consult this customer complaint after a complete check with the diagnostic tool.
Check that the equipment which is causing the fault is approved.
Check that this equipment has been correctly installed without modification to the original wiring, in particular, that
of the ABS (connections to earth and + after ignition/+ before ignition of the ABS are not permitted).
AFTER REPAIRClear the computer fault memory.
Carry out a road test followed by another check with the diagnostic tool.
ABS_V04_ALP7
