2009 RENAULT TWINGO RS climate control

61A-59
HEATING
Passenger compartment fan assembly control unit: Removal - Refitting
LEFT-HAND DRIVE
61A
aDisconnect the connectors from the lower trim on
the dashboard (4) .
aRemove:
-the steering wheel lower cover bolt,
-the steering wheel lower cover (5) .II - OPERATION FOR REMOVAL OF PART
CONCERNED
aDisconnect the connector (6) from the blower unit
control unit on the left-hand side.
aRemove:
-the blower unit control unit bolts (7) ,
-the blower unit control unit.
119711
CLIMATE CONTROL
119714

61A-60
HEATING
Passenger compartment fan assembly control unit: Removal - Refitting
LEFT-HAND DRIVE
61A
aDisconnect the connector (8) from the blower unit
control unit on the right-hand side.
aMove aside the blower unit control unit wiring har-
ness (9) .aRemove:
-the blower unit control unit bolts (10) ,
-the blower unit control unit (11) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the blower unit control unit,
-the bolts to the blower unit control unit.
aFit the wiring harness on the blower unit control unit.
aConnect the blower unit control unit connector.
aRefit:
-the blower unit control unit,
-the bolts to the blower unit control unit. AIR CONDITIONING or STANDARD HEATING
121170
121169
119714
AIR CONDITIONING or STANDARD HEATING
CLIMATE CONTROL

61A-63
HEATING
Passenger compartment fan assembly control unit: Removal - Refitting
RIGHT-HAND DRIVE
61A
II - REMOVAL OPERATION FOR PART
CONCERNED
aDisconnect the connector (3) from the blower unit
control unit on the left-hand side.
aRemove:
-the blower unit control unit bolts (4) ,
-the blower unit control unit.aDisconnect the connector (5) from the blower unit
control unit on the right-hand side.
aMove the electrical wiring (6) away from the fan as-
sembly control unit. CLIMATE CONTROL
124100
AIR CONDITIONING or STANDARD HEATING
124101
121169

61A-64
HEATING
Passenger compartment fan assembly control unit: Removal - Refitting
RIGHT-HAND DRIVE
61A
aRemove:
-the blower unit control unit bolts (7) ,
-the blower unit control unit (8) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the blower unit control unit,
-the bolts to the blower unit control unit.
aFit the fan assembly control unit electrical wiring.
aConnect the blower unit control unit connector.
aRefit:
-the blower unit control unit,
-the bolts to the blower unit control unit.aConnect the blower unit control unit connector.
II - FINAL OPERATION.
aConnect the hazard warning lights switch connector.
aClip on the "trim - air vent" assembly.
aRefit the instrument panel (see Instrument panel:
Removal - Refitting) (MR 411, 83A, Instrument
panel).
aRefit the passenger's front airbag (see Passenger's
frontal airbag: Removal - Refitting) (MR 411, 88C,
Airbags and seat belt pretensioners).
aClip on the upper storage compartment on the driv-
er’s side.
aConnect the battery (see ) (MR 411, 80A, Battery).
aUnlock the airbag computer using the Diagnostic
tool (see Fault finding - Replacement of compo-
nents) (MR 413, 88C, Airbags and pretensioners).
124100
AIR CONDITIONING or STANDARD HEATING
CLIMATE CONTROL
AIR CONDITIONING or STANDARD HEATING
AIR CONDITIONING or STANDARD HEATING

61A-66
HEATING
Control panel: Removal - Refitting
61A
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aDisconnect the connector from the control panel (3) .
aUnclip the recirculation control cable (4) .
aRemove the control panel ball joint (5) .
aUnclip the air mixing control cable (6) .
aPress on the tab (7) .
aRemove the control panel ball joint.
aUnclip the air distribution control cable (8) .
aPress on the tab.
aRemove the control panel ball joint (9) .
aDisconnect the connectors from the control panel.aUnclip the control panel (10) .
aRemove the control panel from the dashboard from
above.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aFit the control panel onto the dashboard from above.
aClip on the control panel (11) . AIR CONDITIONING or STANDARD HEATING
119696
CLIMATE CONTROL
119707
119706

61A-67
HEATING
Control panel: Removal - Refitting
61A
aConnect the control panel connectors.
aPress on the tab.
aFit the control panel ball joint.
aClip on the air distribution control cable.
aPress on the tab.
aFit the control panel ball joint.
aClip on the air mixing control cable.
aFit the control panel ball joint.
aClip on the recirculation control cable.
aConnect the control panel connector.
II - FINAL OPERATION.
aConnect the hazard warning lights switch connector.
aClip on the « trim - air vent » assembly.
aRefit:
-the instrument panel (see Instrument panel: Re-
moval - Refitting) (MR 411, 83A, Instrument pan-
el),
-the passenger's front airbag (see Passenger's
frontal airbag: Removal - Refitting) (MR 411,
88C, Airbags and pretensioners).
aClip on the upper storage compartment on the driv-
er's side.
aConnect the battery (see ) (MR 411, 80A, Battery).
aUnlock the airbag computer using the Diagnostic
tool (see Fault finding - Replacement of compo-
nents) (MR 413, 88C, Airbags and seat belt preten-
sioners). CLIMATE CONTROL
AIR CONDITIONING or STANDARD HEATING

61A-68
HEATING
Recirculation motor: Removal - Refitting
LEFT-HAND DRIVE, and CLIMATE CONTROL
61A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aUnclip the upper storage compartment (1) on the
driver's side using the (Car. 1363).
aRemove the front left-hand side air distribution duct
(see 61A, Heating, Front side air distribution
duct: Removal - Refitting, page 61A-7) .II - OPERATION FOR REMOVAL OF PART
CONCERNED
aDisconnect the connector (2) from the recirculation
motor.
aRemove:
-the bolts (3) from the recirculation motor,
-the recirculation motor.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the recirculation motor,
-the recirculation motor bolts.
aConnect the recirculation motor connector.
II - FINAL OPERATION
aRefit the front left-hand side air distribution duct (see
61A, Heating, Front side air distribution duct:
Removal - Refitting, page 61A-7) .
aClip on the upper storage compartment on the driv-
er’s side. Special tooling required
Car. 1363Set of tr im removal levers.
119502
121171
Note:
When refi tting the recirculation motor, make sure
that the drive system notches are correctly posi-
tioned.

61A-69
HEATING
Recirculation motor: Removal - Refitting
LEFT-HAND DRIVE, and CLIMATE CONTROL
61A
aCheck that the air recirculation is operating correctly.