59A-5
SAFETY ACCESSORIES
Rear seat belt buckle: Removal - Refitting
59A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aTilt the rear bench seat base or the rear seat (depen-
ding on the equipment level).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
1 - 1st type
aRemove:
-the bolts (1) ,
-the rear seat belt buckles.2 - 2nd type
aRemove the rear seat belt "buckle-bolt" assembly
(2) .
REFITTING
I - REFITTING PREPARATIONS OPERATION
2nd type
aAlways replace the rear seat belt "buckle-bolt" as-
sembly.
aClean the nut (2) .
II - REFITTING OPERATION FOR PART
CONCERNED
1 - 1st type
aRefit:
-the rear seat belt buckles,
-Always replace the rear seat belt buckle bolts after
each removal.
-the bolts (1) .
aTorque tighten the rear seat belt buckle bolts (21
Nm ).
2 - 2nd type
aRefit the new rear seat belt "buckle-bolt" assembly
(2) . Tightening torquesm
rear seat belt buckle
bolts21 Nm
rear seat belt buckle bolt28 Nm
121305
120883
59A-6
SAFETY ACCESSORIES
Rear seat belt buckle: Removal - Refitting
59A
aTorque tighten the rear seat belt buckle bolt (28
Nm).
III - FINAL OPERATION.
aTilt the rear bench seat base or the rear seat back to
the normal position (depending on the equipment le-
vel).Note:
It is necessary to wait 6 hours before applying
any force to the rear seat belt buckle after it has
been torque tightened.
