2009 RENAULT TWINGO roof

87D-3
ELECTRIC WINDOWS - SUNROOF
Electric sunroof: List and location of components
OPENING ROOF
87D
4 - Sunroof moving panel
To remove it (see Sunroof mobile panel: Removal -
Refitting) (MR 412, 52A, Non-side opening elements
mechanism).
5 - Sunroof motor - computer
The “sunroof computer - motor” assembly is located
under the headlining, at the rear of the vehicle.
121153
121396

87D-4
ELECTRIC WINDOWS - SUNROOF
Front electric window switches on driver's door: Removal - Refitting
ELECTRIC FRONT WINDOW or ONE-TOUCH ELECTRIC PASSENGER WINDOW CONTROL
87D
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the driver's front side door trim (see Front
side door trim: Removal - Refitting) (MR 412,
72A, Side opening element trim).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the electric window switches by pressing
on the clips (1) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit the electric window switches on the driver's
electric window plate.
II - FINAL OPERATION.
aRefit the driver's front side door trim (see Front side
door trim: Removal - Refitting) (MR 412, 72A,
Side opening element trim).
119513

87D-5
ELECTRIC WINDOWS - SUNROOF
Front electric window switch on passenger door: Removal - Refitting
ELECTRIC FRONT WINDOW or ONE-TOUCH ELECTRIC PASSENGER WINDOW CONTROL
87D
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the passenger's front side door trim ( (see
Front side door trim: Removal - Refitting) ).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the electric window switch by pressing the
clips (1) .
REMOVAL
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit the electric window switch on the driver's elec-
tric window plate.
II - FINAL OPERATION.
aRefit the passenger's front side door trim ( (see
Front side door trim: Removal - Refitting) ).
119508
119512

87D-6
ELECTRIC WINDOWS - SUNROOF
Sunroof switch: Removal - Refitting
OPENING ROOF
87D
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the interior light (see 81B, Interior li-
ghting, Interior light: Removal - Refitting, page
81B-2) .
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aUnclip the sunroof switch (1) using the (Car. 1363).
aDisconnect the sunroof switch connector.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aConnect the sunroof switch connector.
aClip on the sunroof switch.
II - FINAL OPERATION.
aRefit the interior light (see 81B, Interior lighting, In-
terior light: Removal - Refitting, page 81B-2) . Special tooling required
Car. 1363Set of tr im removal levers.
121391

87D-7
ELECTRIC WINDOWS - SUNROOF
Sunroof opening motor: Removal - Refitting
OPENING ROOF
87D
REMOVAL
I - REMOVAL PREPARATION OPERATION
aDisconnect the battery (see 80A, Battery, Battery:
Removal - Refitting, page 80A-2) .
aRemove:
-the upper bolt from the front seat belts (see Front
seat belt: Removal - Refitting) (MR 412, 59A, Sa-
fety equipment),
-the upper bolt from the rear seat belts (see Rear
seat belt: Removal - Refitting) (MR 412, 59A, Sa-
fety equipment),
-the sun visors (see Sun visor: Removal - Refit-
ting) (MR 412, 57A, Interior equipment),
-the interior rear-view mirror covers (see Interior
rear-view mirror: Removal - Refitting) (MR 412,
57A, Interior equipment),
-the A-pillar trims (see Windscreen pillar trim: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the rear parcel shelf side trim panels (see Rear
parcel shelf side trim: Removal - Refitting) (MR
412, 71A, Body internal trim),
-the rear panel trims (see Rear panel lining: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the rear quarter panel trims (see Quarter panel
trim: Removal - Refitting) (MR 412, 71A, Body in-
ternal trim),
-the B-pillar upper trims (see B-pillar upper trim:
Removal - Refitting) (MR 412, 71A, Body internal
trim).
-the headlining (see Headlining: Removal - Refit-
ting) (MR 412, 71A, Body internal trim).II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the sunroof computer mounting bolts (1) ,
-the “sunroof computer - computer mounting” as-
sembly (2) .
aDisconnect the supply connector (3) from the sun-
roof motor.
121396

87D-8
ELECTRIC WINDOWS - SUNROOF
Sunroof opening motor: Removal - Refitting
OPENING ROOF
87D
1 - Sunroof motor
aRemove:
-the bolts (4) from the sunroof motor,
-the sunroof motor (5) .
2 - Sunroof computer
aUnclip the sunroof computer (6) by pressing the clip
(7)
aExtract the sunroof computer (8) .aDisconnect the sunroof computer supply connector
(9) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
1 - Sunroof computer
aConnect the sunroof computer supply connector.
aClip the sunroof computer onto its mounting.
2 - Sunroof motor
aRefit:
-the sunroof motor,
-the sunroof motor bolts.
aConnect the sunroof motor supply connector to the
sunroof computer.
aRefit:
-the “sunroof computer - computer mounting” as-
sembly,
-the sunroof mounting bolts.
II - FINAL OPERATION.
aRefit:
-the headlining (see Headlining: Removal - Refit-
ting) (MR 412, 71A, Body internal trim),
121393
121394
121395

87D-9
ELECTRIC WINDOWS - SUNROOF
Sunroof opening motor: Removal - Refitting
OPENING ROOF
87D
-the B-pillar upper trims (see B-pillar upper trim:
Removal - Refitting) (MR 412, 71A, Body internal
trim).
-the rear quarter panel trims (see Quarter panel
trim: Removal - Refitting) (MR 412, 71A, Body in-
ternal trim),
-the rear panel trims (see Rear panel lining: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the rear parcel shelf side trim panels (see Rear
parcel shelf side trim: Removal - Refitting) (MR
412, 71A, Body internal trim),
-the A-pillar trims (see Windscreen pillar trim: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the interior rear-view mirror covers (see Interior
rear-view mirror: Removal - Refitting) (MR 412,
57A, Interior equipment),
-the sun visors (see Sun visor: Removal - Refit-
ting) (MR 412, 57A, Interior equipment),
-the upper bolt from the rear seat belts (see Rear
seat belt: Removal - Refitting) (MR 412, 59A, Sa-
fety equipment),
-the upper bolt from the front seat belts (see Front
seat belt: Removal - Refitting) (MR 412, 59A, Sa-
fety equipment).
aConnect the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-2) .
aCarry out the necessary operations (see Electric
sunroof: Initialisation) (MR 413, 87D, Electric win-
dows - Sunroof).

88A-37
WIRING HARNESS
Engine wiring: Removal - Refitting
EQ UIPMENT LEVEL SPORT
88A
aRemove:
-the bolts (2) from the engine compartment connec-
tion unit cover,-the cover to the engine compartment connection
unit.
aRemove the injection computer tamperproof panel
from the injection computer mounting.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a
aDisconnect the connectors from: - the camshaft position sensor (4) ,
121212
RIGHT-HAND DRIVE
WARNING
To prevent any risk of noise, premature wear,
shor t circuits, etc. after the refitting operation,
mark the wiring routing and how to connect the
connectors.
140655