31A-54
FRONT AXLE COMPONENTS
Front anti-roll bar: Removal - Refitting
EQ UIPMENT LEVEL SPORT
31A
Anti-roll bar specifications:
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
aRemove:
-the front wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) ,
-the wheel arch liners (see Front wheel arch liner:
Removal - Refitting) (55A, Exterior protection),
-the front axle subframe (see 31A, Front axle com-
ponents, Front axle subframe: Removal - Refit-
ting, page 31A-43) .II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the nuts (1) of the anti-roll bar tie rods,
-the anti-roll bar tie rods from the anti-roll bar.
aRemove:
-the anti-roll bar bearing bolts (2) ,
-the anti-roll bar bearings (3) ,
-the anti-roll bar, Special tooling required
Sus. 1824Fork for fitting the anti-roll bar
centre bearings.
Tightening torquesm
anti-roll bar bearing
bolts35 N.m
Colour∅ of the strut in mm
Brown 21
Blue 20132461
132457
