38C-95
AFTER REPAIRClear the computer fault memory.
Carry out a road test followed by another check with the diagnostic tool.
V3 MR-413-X44-38C050$180.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Fault finding chart38C
Bosch 8.1 ESP
Vdiag No.: 05
ALP9 Spongy pedal
NOTESOnly address this customer complaint after a complete check with the diagnostic tool.
Check the conformity of the mechanical components (see MR 411, Mechanical,
30A, General information, Brake, Specifications).
Bleed the primary hydraulic circuit (see MR 411, Mechanical, 30A, General information, Brake circuit,
Bleeding).
After the operation, carry out a road test with ABS regulation.
If the fault is still present:
Carry out an After-Sales bleed using command SC006 Bleed hydraulic unit and brake circuit.
After the operation, carry out a road test with ABS regulation.
If the fault is still present:
Bleed the primary hydraulic circuit again (see MR 411, Mechanical, 30A, General information, Brake circuit,
Bleeding).
After the operation, carry out a road test with ABS regulation.
If the customer complaint is particularly pronounced, and bleeding the circuit does not improve matters, replace
component 1094 (see MR 411, Mechanical, 38C, Hydraulic brake unit, Removal - Refitting).
ESP_V05_ALP9
38C-96
AFTER REPAIRClear the computer fault memory.
Carry out a road test followed by another check with the diagnostic tool.
V3 MR-413-X44-38C050$180.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Fault finding chart38C
Bosch 8.1 ESP
Vdiag No.: 05
ALP10 Brake pedal vibration
NOTESOnly address this customer complaint after a complete check with the diagnostic tool.
Check the conformity of the mechanical components and in particular check that the
brake discs are not warped.
It is normal that the brake pedal vibrates during ABS regulation or braking pressure distribution on the front and
rear axles ("braking compensator" function).
ESP_V05_ALP10
38C-98
AFTER REPAIRClear the computer fault memory.
Carry out a road test followed by another check with the diagnostic tool.
V3 MR-413-X44-38C050$180.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Fault finding chart38C
Bosch 8.1 ESP
Vdiag No.: 05
ALP12ABS computer not detected during the multiplex network test
on CLIP
NOTESOnly address this customer complaint after a complete check with the diagnostic tool.
After the multiplex network test on CLIP, if the ABS/ESP computer is not detected, carry out the following
operations:
–Return to the home menu of the CLIP screen.
–Switch off the ignition.
–Restart the engine (+ after ignition feed).
–Repeat the multiplex network test.
–If the fault is still present, perform the fault finding described in ALP1 No dialogue with the ABS/ESP computer.
ESP_V05_ALP12
38C-101
AFTER REPAIRClear the computer fault memory.
Carry out a road test followed by another check with the diagnostic tool.
V3 MR-413-X44-38C050$180.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Fault finding chart38C
Bosch 8.1 ESP
Vdiag No.: 05
ALP15Intermittent illumination of brake, ESP, ABS, SERVICE and STOP
warning lights and the message "brake failure" on the instrument
panel with no fault codes in the computer
NOTESSpecial notes:
Only address this customer complaint after a complete check with the diagnostic tool.
Problem with external supply to the computer:
The computer is intermittently without supply because of bad contacts in the electrical
supply circuit.
Refer to the interpretation of fault DF001 Computer supply.
ESP_V05_ALP15
