62B - 26
CLIMATE CONTROL
Fault finding – Interpretation of statuses62B
V3 MR-372-J84-62B000$070.mif
Vdiag No.: 44
ET141
PASSENGER COMPARTMENT BLOWER
NOTESSpecial note:
This status is used by the UCH to authorise engagement of the passenger
compartment heating resistors (RCH): operating safety.
This status shows the operation of the passenger compartment blower.
When the passenger compartment blower is operating (from speed 1 to speed 8), the status displays:
RUNNING.
When the passenger compartment blower is not operating (speed 0), the status displays: STOPPED.
If the status does not operate as displayed, check that the passenger compartment blower is operating
correctly. If the passenger compartment blower does not work, apply the fault finding procedure in ALP 5 no
passenger compartment ventilation.
If the passenger compartment blower works correctly but the status displays the message STOPPED, check
that the passenger compartment blower visual return (propeller symbol) on the control panel works correctly
(increase in propeller bargraphs according to the eight speeds).
If the passenger compartment blower visual return (propeller symbol) does not work: Contact your Techline.
If the fault is still present, carry out fault finding on the multiplex network.
AFTER REPAIRRepeat the conformity check from the start.
ACREG X84 1.1
Edition 2
