Downloaded from www.Manualslib.com manuals search engine
parking distance control........................(up to the end of the DU)driving ...................................................(up to the end of the DU)reversing sensor ...................................(up to the end of the DU)
2.39
ENG_UD10569_1Aide au parking (X85 - B85 - C85 - S85 - K85 - Renault)ENG_NU_853-3_BCSK85_Renault_2
Parking distance control
This function is an addi- tional aid that indicates the distance between the vehi- cle and an obstacle whilst reversing, using sound signals.
Under no circumstances should it replace the driver’s care or respon- sibility whilst reversing.
The driver should always pay atten- tion to sudden incidents during driv- ing: always ensure that there are no moving obstacles (such as a child, animal, pram, bicycle, etc.) or small, narrow objects such as stones or posts in your path when manoeu- vring.
Operating principle
Ultrasonic sensors, fitted in the vehi- cle’s rear bumper, measure the dis- tance between the vehicle and an ob- stacle when reversing.
This measurement is indicated by beeps which become more frequent the closer you come to the obstacle, until they become a continuous beep when the vehicle is approximately 30 centi- metres from the obstacle.
There is a beep when changing to re- verse gear.
Note: make sure that the ultrasonic sensors are not obscured (by dirt, mud, snow, etc.).
Operating faults
When the system detects an operating fault there will be a 5-second, contin- uous warning beep when reverse gear is selected. Consult an approved dealer.
PARkING DISTANCE CONTROL (1/2)
When the vehicle is being driven at a speed below approximately 6 mph (10 km/h), certain noises (motorcy- cle, lorry, pneumatic drill, etc.) may trigger the beeping sound.
