2009 Peugeot 308 CC Button
[x] Cancel search: ButtonPage 131 of 294
8
i
117
DRIVING
CRUISE CONTROL
System which automatically maintains
the speed of the vehicle at the value
programmed by the driver, without any
action on the accelerator pedal.
The cruise control is switched on
manually: it requires a minimum vehicle
speed of 25 mph (40 km/h) and the en-
gaging:
- of fourth gear on the manual gearbox,
- of second gear on the automatic gearbox, in sequential driving mode,
-
of position D on the automatic gearbox.
The cruise control is switched off
manually or by pressing the brake or
clutch pedal or on triggering of the ESP
system for safety reasons.
It is possible to exceed the programmed
speed temporarily by pressing the acce-
lerator pedal.
To return to the programmed speed,
simply release the accelerator pedal.
Switching off the ignition cancels any
programmed speed value. The controls of this system are grouped
together on lever
A .
1. Cruise control mode selection dial
2. Speed programming/value decrease
button
3. Speed programming/value increase
button
4. Cruise control off/resume button The programmed information is grouped
together on the instrument panel display.
5. Cruise control off/resume indication
6.
Cruise control mode selection indication
7. Programmed speed value
Steering wheel controls Displays on the instrument
panel
The cruise control cannot, in any
circumstances, replace the need
to respect speed limits, nor can it
replace the need for vigilance and
responsibility on the part of the
driver.
You are advised to keep your feet
near the pedals at all times.
Page 132 of 294
8
!
118
DRIVING
When the cruise control is switched
on, be careful if you maintain the
pressure on one of the programmed
speed changing buttons: this may
result in a very rapid change in the
speed of your vehicle.
Do not use the cruise control on
s l i p p e r y r o a d s o r i n h e a v y t r a f fi c .
On a steep descent, the cruise
control will not be able to prevent
the vehicle from exceeding the pro-
grammed speed.
To avoid any risk of jamming of the
pedals:
- ensure that the mat is posi-tioned correctly,
-
n e v e r fi t o n e m a t o n t o p o f a n o t h e r .
Programming
Turn dial 1 to the "CRUISE" po-
sition: the cruise control mode is
selected but is not switched on
(OFF).
Exceeding the programmed speed
Intentional or unintentional exceeding of the programmed
s p e e d r e s u l t s i n fl a s h i n g o f t h i s s p e e d o n t h e d i s p l a y .
Return to the programmed speed, by means of intentional or
unintentional deceleration of the vehicle, automati cally cancels
t h e fl a s h i n g o f t h e s p e e d .
Return to normal driving
Turn dial 1 to the "0" position: the cruise control mode is
deselected. The display returns to the distance rec order. Operating fault
In the event of a cruise control malfunc-
tion, the speed is cleared resulting in
fl a s h i n g o f t h e d a s h e s .
Have it checked by a PEUGEOT dealer.
Set the programmed speed by accel-
erating to the required speed, then
press button 2 or 3 (e.g.: 70 mph
(110 km/h)).
Switch off the cruise control by pressing button 4 : the dis-
p l a y c o n fi r m s t h a t i t h a s b e e n s w i t c h e d o f f ( O F F ) .
Switch the cruise control back on by pressing button 4 again.
You can then change the programmed speed using but tons 2
and 3 :
- by + or - 1 mph (km/h) = short press,
- by + or - 5 mph (km/h) = long press,
- in steps of + or - 5 mph (km/h) = maintained press.
Page 134 of 294
8
i
i
120
DRIVING
Deactivation Operating fault The system will be deactivated au-
tomatically when a trailer is being
towed or when a bicycle carrier is
fi t t e d ( v e h i c l e fi t t e d w i t h a t o w b a r
or bicycle carrier recommended by
PEUGEOT).
Reactivation
Press button A again, the warning
lamp switches off, the system is re-
activated.
Press button A , the warning lamp
comes on, the system is fully deacti-
vated. In bad weather or in winter, ensure
that the sensors are not covered
with mud, ice or snow. When re-
verse gear is engaged, an audible
signal (long beep) indicates that
the sensors may be dirty.
When the vehicle is being driven at
a speed below approximately 6 mph
(10 km/h), certain sources of noise
(motorcycles, lorries, pneumatic
drills, ...) may trigger the reversing
audible signal. If an operating fault occurs, this
warning lamp is displayed on
the instrument panel and/or a
message appears on the multi-
function screen, accompanied by an au-
dible signal (short beep), when reverse
gear is engaged.
Consult a PEUGEOT dealer.
Page 145 of 294
10
!
i
131
PRACTICAL INFORMATION
T a k e c a r e , t h e b o t t l e o f fl u i d c o n -
t a i n s e t h y l e n e - g l y c o l . T h i s p r o d u c t
is harmful if swallowed and causes
i r r i t a t i o n t o t h e e y e s . K e e p i t o u t o f
r e a c h o f c h i l d r e n .
T h e e x p i r y d a t e o f t h e fl u i d i s i n d i -
c a t e d o n t h e b a s e o f t h e b o t t l e .
T h e b o t t l e i s d e s i g n e d f o r a s i n -
g l e u s e ; e v e n i f o n l y p a r t l y u s e d , i t
m u s t b e r e p l a c e d .
A f t e r u s e , d o n o t d i s c a r d t h e b o t -
t l e i n t o t h e e n v i r o n m e n t , t a k e i t t o a
P E U G E O T d e a l e r o r t o a n o r g a n i -
s a t i o n r e s p o n s i b l e f o r i t s c o l l e c t i o n .
D o n o t f o r g e t t o o b t a i n a n e w b o t -
t l e o f fi l l i n g p r o d u c t , a v a i l a b l e f r o m
P E U G E O T d e a l e r s .
C o n n e c t t h e c o m p r e s s o r ' s e l e c t r i c
p l u g t o t h e v e h i c l e ' s 1 2 V s o c k e t
a g a i n .
S t a r t t h e v e h i c l e a g a i n a n d l e a v e t h e
e n g i n e r u n n i n g .
A d j u s t t h e p r e s s u r e u s i n g t h e c o m -
p r e s s o r ( t o i n fl a t e : s w i t c h A in position
"1" ; t o d e fl a t e : s w i t c h A in position
"0" and press button B ) , i n a c c o r d -
a n c e w i t h t h e v e h i c l e ' s t y r e p r e s s u r e
label (located on the door aperture
o n t h e d r i v e r ' s s i d e ) , t h e n r e m e m b e r
t o c h e c k t h a t t h e l e a k i s fi l l e d c o r r e c t -
ly (no further loss of pressure after
s e v e r a l m i l e s [ k i l o m e t r e s ] ) .
R e m o v e t h e c o m p r e s s o r , t h e n s t o r e
t h e w h o l e k i t .
D r i v e a t r e d u c e d s p e e d ( 5 0 m p h
[ 8 0 k m / h ] m a x ) f o r n o m o r e t h a n a p -
p r o x i m a t e l y 1 2 5 m i l e s ( 2 0 0 k m ) .
V i s i t a P E U G E O T d e a l e r a s s o o n a s
p o s s i b l e t o h a v e t h e t y r e r e p a i r e d o r
r e p l a c e d b y a t e c h n i c i a n . I f t h e v e h i c l e i s fi t t e d w i t h t y r e u n d e r -
i n fl a t i o n d e t e c t i o n , t h e t y r e u n d e r -
i n fl a t i o n w a r n i n g l i g h t w i l l r e m a i n o n
after the wheel has been repaired
until the system is reinitialised by a
P E U G E O T d e a l e r .
Page 184 of 294
169
NAV
0 3
1
2
3
6
5
4
SELECTING A DESTINATION
P r e s s t h e N A V b u t t o n a g a i n o r s e l e c t t h e " N a v i g a t i o n " M e n u f u n c t i o n a n d p r e s s O K t o c o n fi r m .
Select the "Destination input" function a n d p r e s s O K t o c o n fi r m .
Press the NAV button.
Select the letters of the town one by o n e c o n fi r m i n g e a c h t i m e b y p r e s s i n g OK.
Once the country has been selected, t u r n t h e r i n g a n d s e l e c t t h e t o w n f u n c t i o n . P r e s s O K t o c o n fi r m .
" N A V I G A T I O N " M E N U
DESTINATION INPUT
A p r e - s e t l i s t ( b y e n t e r i n g t h e fi r s t f e w l e t t e r s ) o f t h e t o w n s i n t h e A p r e - s e t l i s t ( b y e n t e r i n g t h e fi r s t f e w l e t t e r s ) o f t h e t o w n s i n t h e country selected can be accessed via the LIST butto n ontton on the virtual keypad.
Select the "Address input" function a n d p r e s s O K t o c o n fi r m .
ADDRESS INPUT
T h e l i s t o f t h e l a s t 2 0 d e s t i n a t i o n s a p p e a r s u n d e r t h e " N a v i g a t i o n " T h e l i s t o f t h e l a s t 2 0 d e s t i n a t i o n s a p p e a r s u n d e r t h e " N a v i g a t i o n " Menu function.
The "NAVIGATION" voice commands are listed in section 09.
D u r i n g g u i d a n c e , a l o n g p r e s s o n t h e e n d o f t h e l i g h t s s t a l k r e p e a t s t h e l a s t g u i d a n c e instruction.
Page 186 of 294
171
NAV
0 3
5
6
7
1
2
3
4
N A V I G A T I O N - G U I D A N C E
ROUTE OPTIONS
Select the "Route dynamics" function. This function provides access to the " T r a f fi c i n d e p e n d e n t " , " S e m i - d y n a m i c " and "Dynamic" options.
Select the "Avoidance criteria" function. This function provides access to the "Avoid" options (motorways, toll roads, ferries, tunnels).
T u r n t h e r i n g a n d s e l e c t t h e "Recalculate" function to take into account the route options selected. P r e s s O K t o c o n fi r m .
Press the NAV button.
P r e s s t h e N A V b u t t o n a g a i n o r s e l e c t t h e " N a v i g a t i o n " M e n u f u n c t i o n a n d p r e s s O K t o c o n fi r m .
Select the "Route type" function and p r e s s O K t o c o n fi r m . T h i s f u n c t i o n a l l o w s y o u t o c h a n g e t h e r o u t e t y p e .
Select the "Route options" function a n d p r e s s O K t o c o n fi r m .
" N A V I G A T I O N " M E N U
ROUTE OPTIONS
ROUTE TYPE
ROUTE DYNAMICS
A V O I D A N C E C R I T E R I A
RECALCULATE
W h e n t h e m a p i s d i s p l a y e d o n t h e s c r e e n , y o u c a n s e l e c t " M a p S e t t i n g s " t h e n " 2 D M a p / 2 . 5 D M a p / 3 D M a p / N o r t h U p / H e a d i n g U p " . T h e d i s p l a y i n g o f b u i l d i n g s i n 3 D m o d e d e p e n d s o n t h e p r o g r e s s o f t h e t o w n m a p p i n g .
Page 187 of 294
172
NAV
5
6
7
1
2
3
4
8
A D D I N G A S T O P O V E R
Enter a new address, for example.
Once the new address has been e n t e r e d , s e l e c t " S t a r t r o u t e g u i d a n c e " a n d p r e s s O K t o c o n fi r m .
Position the stopover on the list and p r e s s O K t o c o n fi r m .
Press the NAV button.
P r e s s t h e N A V b u t t o n a g a i n o r s e l e c t t h e " N a v i g a t i o n " M e n u f u n c t i o n a n d p r e s s O K t o c o n fi r m .
Select the "Add stopover" function(5 stopovers maximum) and press OK t o c o n fi r m .
Select the "Stopovers" function and p r e s s O K t o c o n fi r m .
" N A V I G A T I O N " M E N U
S T O P O V E R S
A D D S T O P O V E R
ADDRESS INPUT
T o c h a n g e t h e s t o p o v e r s , r e p e a t o p e r a t i o n s 1 t o 3 a n d s e l e c t T o c h a n g e t h e s t o p o v e r s , r e p e a t o p e r a t i o n s 1 t o 3 a n d s e l e c t " R e a r r a n g e r o u t e " ( s e l e c t a s t o p o v e r , d e l e t e i t o r m o v e i t o n t h e l i s t " R e a r r a n g e r o u t e " ( s e l e c t a s t o p o v e r , d e l e t e i t o r m o v e i t o n t h e l i s t u s i n g t h e r i n g t o c h a n g e t h e o r d e r , c o n fi r m i t s n e w p o s i t i o n a n d fi n i s h u s i n g t h e r i n g t o c h a n g e t h e o r d e r , c o n fi r m i t s n e w p o s i t i o n a n d fi n i s h with "Recalculate").
Stopovers can be added to or deleted from the route once the destination has been selected.
Repeat operations 1 to 7 as many times as necessar y then select " R e c a l c u l a t e " a n d p r e s s O K t o c o n fi r m .
START ROUTE GUIDANCE
Page 188 of 294
173
NAV
0 3
1
2
3
4
7
8 5
6
N A V I G A T I O N - G U I D A N C E
S E A R C H I N G F O R P O I N T S O F I N T E R E S T
Press the NAV button.
P r e s s t h e N A V b u t t o n a g a i n o r s e l e c t t h e " N a v i g a t i o n " M e n u f u n c t i o n a n d p r e s s O K t o c o n fi r m .
Select the "POI nearby" function to search for POIs around the vehicle.
Select the "POI search" function and p r e s s O K t o c o n fi r m .
" N A V I G A T I O N " M E N U
POI SEARCH
POI NEARBY
Select the "POI in city" function to search for POIs in the city required. Select the country then enter the n a m e o f t h e c i t y u s i n g t h e v i r t u a l keypad.
Select the "POI near route" function to search for POIs near the route.
Select the "POI in country" function to search for POIs in the country required.
Select the "POI near destination" function to search for POIs near the point of arrival of the route.
POI NEAR DESTINATION
POI IN COUNTRY
POI NEAR ROUTE
A list of cities present in the country selected can be accbe accessed via the LIST button on the virtual keypad.
POI IN CITY
The points of interest (POIs) indicate all of the service locations in the vicinity (hotels, various businesses, airports...).