Page 23 of 284
17
In Brief
Parking the vehicle zApply hand brake firmly without
operating release bu tton. On a downhill
or uphill slope, apply as firmly as
possible. Apply foot brake at same time
to reduce operating force.
z Switch off engine and ignition. Turn the
ignition key to position 0 and pull it out.
Turn the steering wheel until it is clear
that the steering lock has engaged
(anti-theft protection).
On vehicles with automatic
transmission 3, the key can only be
removed when the selector lever is in
the P position.
On vehicles with manual transmission
automated 3, control indicator R
flashes for a few seconds after the
ignition is switched off if the hand brake
has not been applied. z
If the vehicle is standing on a level
surface or a hill, select first gear before
switching the ignition off with manual
transmission automated 3, and with
automatic transmission 3 move selector
lever to P. Also turn front wheels away
from kerb if parked on an uphill slope.
If the vehicle is parked on a slope, with
manual transmi ssion or manual
transmission automated, 3 select
reverse gear before switching the
ignition off, and with automatic
transmission 3 move selector lever to
position P. Also turn front wheels
towards the kerb.
z Lock vehicle with key in lock or button p
on the remote key fob.
To activate the anti-theft locking
system 3 and anti-theft alarm system 3,
press button p twice.
Advice when parking zDo not park the vehicle on an easy
flammable surface. The high
temperature of the exhaust system
could ignite the surface.
z Close the windows and sun roof 3.
z The engine cooling fans may run after
the engine has been switched off 3241.
z After running at high engine speeds or
with high engine loads, operate the
engine briefly at a low load or run in
neutral for approx. 30 seconds before
switching off in order to protect the
turbocharger 3.
Remote control 331,
Central locking system 332,
Anti-theft alarm system 3 3 37,
Vehicle decommissioning 3249.
Back to overview
Page 25 of 284
19
In Brief
Picture no: 18185s.tif
Curtain airbag system 3
The curtain airbag system triggers in case
of a side-on collision and provides a safety
barrier in the head area on the respective
side of the vehicle. This reduces the risk of
injury to the head considerably in case of a
side-on collision.
Airbag system 369.
Picture no: 18294s.tif
Airbag systems which can be
deactivated for the front
passenger *
3
The front and side airbag systems 3 for
the front passenger must be deactivated
if a child restraint system is to be fitted
to the passenger seat. The curtain airbag
system 3, the belt tensioners and all driver
airbag systems remain active when the
systems for the front passenger are
deactivated. The passenger airbag
systems are active in the as-delivered
condition.
Airbag systems which can be
deactivated 375.
Picture no: S0013209.tif
Operating menus via the
information display
3
The menu options are selected via the
menus and the arrow keys or the
multifunction button of the infotainment
system 3 or the left adjusting wheel 3 on
the steering wheel. The relevant menu
options appear on the display.
Selection using arrow keys 3:
Press right or left arrow key.
Back to overview
Page 26 of 284
20 In Brief
Picture no: 17013t.tif
Selection using multifunction button 3:
rotate and press multifunction button.
To exit a menu, turn the multifunction
button left or right to Return or Main and
select.
Picture no: 18187s.tif
Selection using left adjusting wheel on
steering wheel 3: Rotate and press knurled
wheel.
Information display 394.
Picture no: 17344t.tif
Trip computer
3
Functions:
z Range
z Instantaneous consumption
z Distance travelled
z Average speed
z Effective consumption
z Average consumption
z Stop watch
Trip computer 33101.
Ü
Board Computer19,5° 19:36
BC 1 All values
BC 2
257.0
km
Timer
Ø40
km/h
31.0
Ltr.
Ø
7.0
L/100km
1
8
Back to overview
Page 27 of 284
21
In Brief
Picture no: 18435s.tif
Check control
3
The check control software monitors
zRemote control battery.
z Important exterior lighting lamps,
including cables and fuses.
Check control 33104.
Picture no: 18188s.tif
Steering wheel remote control
3
The functions of the infotainment system 3
and the information display can be
operated using the buttons and adjusting
wheels on the steering wheel.
Further information is available in the
infotainment system operating
instructions.
Steering wheel remote control 3 3 118,
Infotainment system 3 118.
Picture no: 18471s.tif
AUX input
3
An external audio source such as a
portable CD player can be connected via
the AUX input with a 3.5 mm jack plug.
AUX input 3 3 119.
Brakelightcheck right
OK
Back to overview
Page 28 of 284
22 In Brief
Picture no: 18189s.tif
Ultrasonic parking sensors
3
When reverse gear is selected, the park
pilot switches itself on automatically.
Manual activation is possible at speed
below 25 km/h by using the r button in
the instrument panel.
An acoustic warning sounds when the
vehicle approaches an obstacle behind.
Ultrasonic parking sensors 3 – page 3 162.
Picture no: 18244s.tif
Tyre pressure loss monitoring
system (DDS = Deflation Detection
System)
3
If a tyre loses pressure, it grows smaller. It
then rotates at a different speed than the
other tyres. If the system detects a
difference in speed, control indicator w
illuminates red.
Picture no: 18245s.tif
After tyre pressure is corrected or a tyre or
wheel is changed, the system must be
initialised by pressing the DDS button.
Deflation detection system 3 3 164.
Back to overview
Page 29 of 284
23
In Brief
Picture no: 18577j.tif
Adaptive Forward Lighting (AFL)
3
ensures better illumination of
zbends (curve lighting),
z crossings and narrow bends
(cornering light). Curve lighting (1)
The light beam pivots based on
steering wheel position and speed
(from approx. 10 km/h).
Cornering light (2)
An additional lamp throws a beam
approx. 90 to the left or right, if the
steering-wheel is turned approx. 90 , the
turn signal is activated and the speed is
below approx. 40 km/h.
Reversing function
If the lights are on, reverse gear is
engaged, and the turn signal is activated,
the cornering light on the appropriate side
is switched on.
Adaptive headlight
3112.
Picture no: 18399s.tif
Personalised key If the vehicle is used by a number of drivers,
each driver can store his or her own
preferred settings and vehicle functions
using their key. These settings and
functions are then activated when the
relevant key is used.
A total of up to five vehicle keys can be
programmed separately and used.
Personalised key 339.
Back to overview
Page 30 of 284
24 In Brief
Picture no: 18327s.tif
Heated steering wheel
3
Heating of the steering wheel and of the
driver’s seat is switched on by a single, or
repeated (as appropriate) activation of the
switch ß - .
Heating of the steering wheel - the section
marked out in the illustration.
Heated steering wheel 351.
Picture no: 18417s.tif
Double load-bay floor
3
Double load-bay floor, which can be
inserted in the baggage compartment in
two positions.
If mounted in the upper position, the space
between the load-bay floor and the spare
wheel well cover 3 can be used as a
stowage compartment.
In this position, if the rear seat backrests
are folded forwards, an almost completely
flat load bay is created.
Double load-bay floor 382.
Picture no: 18335s.tif
Flex-Fix system
3
The Flex-Fix system allows two bikes to be
attached to a pull-ou t carrier integrated
into the vehicle floor.
If not in use, the Flex-Fix system can be
collapsed back into the vehicle floor.
Flex-Fix system 3174.
Back to overview
Page 46 of 284
40 Keys, doors, windows, sun roofProgrammable functions
The vehicle-specific functions P1 to P7
listed in the following table can be
activated and deactivated.
The setting selected is automatically stored
depending on the vehicle key used.
Different settings are stored for each
vehicle key. Use of a specific vehicle key will
activate the settings associated with it.
A total of up to five vehicle keys can be
programmed separately.
Programming permits the technical
prerequisite of the relevant function. To
activate and deactivate the functions and
set the functions, please see the relevant
sections. For page re ferences, see the
following table.
Programming:
z Turn the ignition off, the key must be in
the ignition lock,
Picture no: 18401s.tif
zPull turn signal st alk and wiper stalk
simultaneously to the steering wheel
until you hear a confirmation signal
(approx. 3 seconds),
z The kilometre display shows P1,
Picture no: 18411s.tif
zPush the turn signal stalk (left) up
or down and select the desired
function P1- P7 , see the following table,
Back to overview
