2009 OPEL ANTARA rear view mirror

In brief9
To adjust interior mirror:
Swivel mirror housing
Swivel lever on underside of mirror housing
to reduce dazzle at night.
Take care when driving with interior mirror
adjusted for night vision. Rear view may be
slightly distorted in this position.
6 Mirrors - see page 31,
automatic anti-dazzle interior mirror -
see page 32.
Electrically adjustable exterior
mirrors:
Four way switch in driver’s door
Move selector switch to L or R; four way
switch adjusts corresponding mirror.
6 Further information,
automatic anti-dazzle exterior mirrors -
see page 31,
heated exterior mirrors - see page 105.
Fold in exterior mirrors:
Manually: press lightly.
Electrically 3: with ignition switch in
positions ACC or ON, press button n and
both mirrors will fold in.
Press button n again; both mirrors will fold
to the driving position.
If a folded-in electric mirror has been
folded out manually, pressing button n
only folds the other mirror out. Pressing
button n again folds both mirrors back in.
Fold mirrors back in to driving position
before driving the vehicle.

Locks, doors, windows31
For the safety of pedestrians, the exterior
mirrors will swing out of their normal
mounting position in the event of an
accident-like impact.
As exterior mirrors are convex, objects are
closer than they appear. Use interior mirror
to judge size and distance of objects.
Do not scrape ice from exterior mirrors or
force them if frozen. Use a de-icer.Automatic anti-dazzle exterior mirrors
3
Dazzle is automatically reduced.
Exterior mirrors dim to reduce glare
automatically in conjunction with the
automatic anti-dazzle interior mirror 3 -
see page 32, Fig. S13260.Interior mirror
To adjust interior mirror, swivel mirror
housing.
Swivel lever on underside of mirror housing
to reduce dazzle at night.
Take care when drivin g with interior mirror
adjusted for night vision. Rear view may be
slightly distorted in this position.

Driving and operation143
Control indicator for park pilotControl indicator r illuminates while
driving if there is a fault in the system.
If the acoustic signal sounds 3 times
continuously when there are no obstacles
near the front or rear bumper, there is a
fault in the system.
Have the cause of the fault remedied by a
workshop. To ensure the safety of other road users
and people in the vicinity and to avoid
damage to the vehicle, remember:
z
The park pilot should only be considered
as a supplementary function. Normal
precautions should be maintained when
reversing. Check the rear view and use
the mirrors when reversing.
z Do not push, scratch or otherwise
damage the sensors.
z Do not use high-pressure jet cleaners to
clean the sensors. Clean only with a soft
sponge and clean water.
Automatic level control 3
Automatic level control makes it possible to
keep the height of the vehicle constant
when subjected to different loads in the
rear (e.g. when passengers are occupying
the rear seats or when towing a caravan/
trailer). This significantly improves driving
conditions.
The vehicle is automatically raised at the
rear to its previous unloaded level,
increasing spring travel and ground
clearance.
Headlamp range adjustment -
see page 97.
In the event of malfunctions, do not utilise
the vehicle’s full load capacity. Have the
cause of the fault remedied by a workshop
without delay.