10-21Vehicle care
Note
The driving characteristics of the
repaired tyre is severely affected,
therefore have this tyre replaced.
If unusual noise is heard or the
compressor becomes hot, turn
compressor off for at least
30 minutes.
Pay attention to storage information
and best before date on sealant
bottle. Its sealing capability is not
guaranteed after this time.The sealant bottle can only be used
once. Replace used sealant bottle.
Dispose of used tyre repair kits in
accordance with the applicable laws. 14. Remove any excess sealant
using a cloth.
15. Attach supplied sticker
containing the maximum
permitted speed within the
driver’s field of view.
16. Continue driving immediately
so that sealant is evenly
distributed throughout the tyre.
After driving approx. 5 km
(3 miles) (but no more than
10 minutes), stop and check
tyre pressure, using the
compressor.
17. If the tyre pressure has not
dropped below 130 kPa
(1.3 bar), it may be adjusted to
the prescribed value. Repeat
the procedure until there is no
more loss of pressure.
If the tyre pressure has
dropped below 130 kPa
(1.3 bar), the vehicle must not
be driven. Seek the assistance
of a workshop.
18. Stow tyre repair kit below the
floor carpet in the luggage
compartment.
