Black plate (219,1)
Model "R35-D" EDITED: 2008/ 5/ 20
WARNING
Always follow the instructions below.
Failure to do so could result in damage
to the charging system and cause
personal injury.1. If the booster battery is in another vehicle
*A
, position the two vehicles (
*A
and
*B)
to bring their batteries into close proximity to
each other. Do not allow the two vehi-
cles to touch. 2. Apply parking brake. Move the shift lever to
the
&Pposition. Switch off all unnecessary
electrical systems (light, heater, air condi-
tioner, etc.) .
3. Remove the battery cover. Cover the battery with a firmly wrung out moist cloth to reduce
explosion hazard.
4. Connect jumper cables in the sequence as illustrated (
*1
?
*2
?
*3
?
*4).
If the battery is disconnected or dis-
charged, the steering wheel will lock
and cannot be turned. Supply power
using jumper cables before pushing
the ignition switch and disengaging
the steering lock.
CAUTION
. Always connect positive (+) to posi-
tive (+) and negative ( ) to body
ground (as illustrated) , not to the
battery.
. Make sure that the jumper cables
do not touch moving parts in the
engine compartment and that
clamps do not contact any other
metal.
5. Start the engine of the booster vehicle
*A
and let it run for a few minutes.
In case of emergency
6-5
, Q I R U P D W L R Q 3 U R Y L G H G E \
Black plate (28,1)
8 Maintenance and do-it-yourself
Model "R35-D" EDITED: 2008/ 5/ 20
Maintenance requirement..................................... 8-2
Scheduled maintenance ................................... 8-2
General maintenance ...................................... 8-2
Where to go for service ................................... 8-2
General maintenance .......................................... 8-3
Explanation of maintenance items ....................... 8-3
Maintenance precautions ..................................... 8-5
Engine compartment check locations ...................... 8-7
Removing the cowl top cover ............................ 8-8
Engine cooling system ......................................... 8-9
Checking engine coolant level ......................... 8-11
Changing engine coolant ............................... 8-11
Engine oil ....................................................... 8-12
Checking engine oil level ............................... 8-12
Changing engine oil and filter .......................... 8-12
Transmission oil ............................................... 8-13
Power steering fluid .......................................... 8-13
Brake fluid ...................................................... 8-14
Window washer fluid ........................................ 8-15
Battery .......................................................... 8-15
Precautions ................................................ 8-15
Fluid level check .......................................... 8-16
Jump starting .............................................. 8-17 Drive belts
...................................................... 8-17
Spark plugs .................................................... 8-18
Replacing spark plugs ................................... 8-18
Air cleaner ...................................................... 8-19
Windshield wiper blades .................................... 8-19
Cleaning .................................................... 8-19
Replacing the wiper blades ............................ 8-20
Brakes ........................................................... 8-20
Self-adjusting brakes .................................... 8-20
Brake pad wear indicators .............................. 8-20
High performance brake system ....................... 8-21
Replacing the brake pads .............................. 8-21
Fuses ............................................................ 8-22
Engine compartment ..................................... 8-22
Passenger compartment ................................ 8-23
Intelligent Key battery replacement ....................... 8-23
Lights ............................................................ 8-26
Headlights .................................................. 8-26
Exterior and interior lights ............................... 8-27
Wheels and tires .............................................. 8-29
Tire pressure ............................................... 8-29
Tire and loading information label ..................... 8-31
Checking the tire pressure ............................. 8-32
Tire labeling ................................................ 8-33
, Q I R U P D W L R Q 3 U R Y L G H G E \
Black plate (238,1)
Model "R35-D" EDITED: 2008/ 5/ 20
Inside the vehicleThe maintenance items listed here should be
checked on a regular basis, such as when
performing periodic maintenance, cleaning the
vehicle, etc.
Accelerator pedal:Check the pedal for
smooth operation and make sure the pedal
does not catch or require uneven effort. Keep
the floor mat away from the pedal.
Transmission
&Pmechanism: On a fairly steep
hill, check that your vehicle is held securely with
the shift lever in the&Pposition without applying
any brakes.
Brake pedal: Check the pedal for smooth
operation. If the brake pedal suddenly goes
down further than normal, the pedal feels
spongy or the vehicle seems to take longer to
stop, see a GT-R certified NISSAN dealer
immediately. Keep the floor mat away from the
pedal.
Brakes: Check that the brakes do not pull the
vehicle to one side when applied.
Parking brake: Check the parking brake
operation regularly. The vehicle should be
securely held on a fairly steep hill with only the
parking brake applied. If the parking brake needs
to be adjusted, see a GT-R certified NISSAN
dealer. Seat belts:
Check that all parts of the seat belt
system (for example, buckles, anchors, adjuster
and retractors) operate properly and smoothly,
and are installed securely. Check the belt
webbing for cuts, fraying, wear or damage.
Seats: Check seat position controls such as
seat adjusters, seatback recliner, etc. to ensure
they operate smoothly and that all latches lock
securely in every position. Check that the head
restraints move up and down smoothly and that
the locks (if so equipped) hold securely in all
latched positions.
Steering wheel: Check for changes in the
steering conditions, such as excessive free play,
hard steering or strange noises.
Warning lights and chimes: Make sure that
all warning lights and chimes are operating
properly.
Windshield defroster: Check that the air
comes out of the defroster outlets properly and
in sufficient quantity when operating the heater
or air conditioner.
Windshield wiper and washer*: Check that
the wipers and washer operate properly and that
the wipers do not streak.
Under the hood and vehicleThe maintenance items listed here should be
checked periodically (for example, each time you check the engine oil or refuel) .
Battery*:
Check the fluid level in each cell. It
should be between the MAX and MIN lines.
Vehicles operated in high temperatures or under
severe condition require frequent checks of the
battery fluid level.
Brake fluid level*: Make sure that the brake
fluid level is between the MAX and MIN lines on
the reservoir.
Engine coolant level*: Check the coolant level
when the engine is cold.
Engine drive belts*: Make sure that no belt is
frayed, worn, cracked or oily.
Engine oil level*: Check the level after parking
the vehicle on a level spot and turning off the
engine. Wait at least 5 minutes for the oil to
drain back into the oil pan before checking the
oil.
Exhaust system: Make sure there are no loose
supports, cracks or holes. If the sound of the
exhaust seems unusual or there is a smell of
exhaust fumes in the engine compartment,
immediately have the exhaust system inspected
by a GT-R certified NISSAN dealer.
(
“EXHAUST GAS (Carbon monoxide)”
page 5-2)
Fluid leaks: Check under the vehicle for fuel,
oil, water or other fluid leaks after the vehicle has
8-4
Maintenance and do-it-yourself
, Q I R U P D W L R Q 3 U R Y L G H G E \
Black plate (248,1)
Model "R35-D" EDITED: 2008/ 5/ 20
For further brake fluid information, see the
following section. (
“CAPACITIES AND
RECOMMENDED FUEL/LUBRICANTS” page
9-2)
WARNING
. Use only new fluid from a sealed
container. Old, inferior or contami-
nated fluid may damage the brake
system. The use of improper fluids
can damage the brake system and
affect the vehicle’s stopping ability.
. Clean the filler cap before removing.
. Brake fluid is poisonous and should
be stored carefully in marked con-
tainers out of the reach of children.
CAUTION
Brake Fluid R35 Special DOT4 is the
factory fill brake fluid. The Vehicle
Dynamic Control (VDC) unit and other
related parts were specially designed
for this brake fluid and NISSAN cannot
ensure the best performance and prop-
er operation of the vehicle if other
brake fluid is used.
NOTICE
Do not spill the fluid on any painted
surfaces. This will damage the paint. If
fluid is spilled, wash the surface with
water.
Check the fluid level in the reservoir. If the fluid is
below the MIN line
*1
or the brake warning
light comes on, add Genuine NISSAN Brake
Fluid R35 Special DOT4 fluid up to the MAX line
*2. If fluid must be added frequently, the
system should be checked by a GT-R certified
NISSAN dealer.
8-14
Maintenance and do-it-yourself
BRAKE FLUID
, Q I R U P D W L R Q 3 U R Y L G H G E \
Black plate (255,1)
Model "R35-D" EDITED: 2008/ 5/ 20
light to moderate stops is normal and does not
affect the function or performance of the brake
system.
Proper brake inspection intervals should
be followed.For additional information, see the
maintenance log section of your “NISSAN
Service and Maintenance Guide” for mainte-
nance intervals.HIGH PERFORMANCE BRAKE SYS-
TEMThis vehicle is equipped with high performance
brake pads that provide appropriate braking
force in a broad range of driving environments.
Due to the material used for the brake pads, the
road wheels may become more easily covered
by brake dust, however this does not indicate
that there is a malfunction.
Frequent hard braking may cause scorching of
the brake pads. This will require the brake pads
to be replaced, even if the wear limit has not
been reached. Have the brake pads and disc
rotors inspected at the regular vehicle inspec-
tions.
For more details, contact a GT-R certified
NISSAN dealer.
REPLACING THE BRAKE PADSTo ensure maximum performance, the brake
pads and disc rotors must be replaced as a set.
Never replace or use only the brake pads on
their own. When replacement is required, we
recommend seeing a GT-R certified NISSAN
dealer for servicing.NOTE:. This vehicle is equipped with a high
performance braking system and in-
cludes cross-drilled floating rotors and
radial-mounted six-piston monoblock
calipers. This helps to achieve excellent
stopping performance and fade-resis-
tance. Replace all four sets of brake
pads and disc rotors at the same time
to maintain maximum brake perfor-
mance.
. To maintain steady braking perfor-
mance in both extremely high and low
temperatures, the gap between the
brake pad and caliper is larger than
normal and large-size brake pads are
used. When driving over a bump, a light
rattling sound may be heard from the
brake pad. This does not indicate that
there is a malfunction. .
When the brake disc rotor undergoes
thermal expansion, a rumbling noise
may be heard from the engaging por-
tion of the wheel and the brake disc
rotor. This does not indicate that there
is a malfunction. The noise will cease
when the temperature decreases.
Maintenance and do-it-yourself
8-21
, Q I R U P D W L R Q 3 U R Y L G H G E \
Black plate (272,1)
Model "R35-D" EDITED: 2008/ 5/ 20
speed rating and load carrying capacity as
originally equipped. (
“WHEELS AND
TIRES” page 9-7)
WARNING
. The use of tires other than those
specified or the mixed use of tires of
different brands, construction (bias,
bias-belted, radial or run-flat) , or
tread patterns can adversely affect
the ride, braking, VDC system, hand-
ling, ground clearance, body-to-tire
clearance, tire chain clearance,
speedometer calibration, headlight
aim and bumper height. Some of
these effects may lead to accidents
and could result in serious personal
injury.
. If the wheels are changed for any
reason, always replace with wheels
which have the same off-set dimen-
sion. Wheels of a different off-set
could cause premature tire wear,
degrade vehicle handling character-
istics, affect the VDC system and/or
cause interference with the brake
discs. Such interference can lead to
decreased braking efficiency and/or
early brake pad wear. (
“WHEELS AND TIRES” page
9-7)
. When a wheel is replaced, tire
pressure will not be indicated, the
TPMS will not function and the low
tire pressure warning light will flash
for approximately 1 minute and
remain on after the 1 minute. Con-
tact a GT-R certified NISSAN dealer
as soon as possible for tire replace-
ment and/or system resetting.
. Replacing tires with those not ori-
ginally specified by NISSAN could
affect the proper operation of the
TPMS.
. Do not install a damaged or de-
formed wheel or tire even if it has
been repaired. Such wheels or tires
could have structural damage and
could fail without warning.
. Never use retread tires.
. For additional information regard-
ing tires, refer to “Important Tire
Safety Information” (US) or “Tire
Safety Information” (Canada) in the
Warranty Information Booklet.
. Always use tires of the specified
type, size, brand, construction (bias, bias-belted, radial or run-flat) , and
tread pattern on all four wheels.
Failure to do so may result in a
circumference difference between
tires on the front and rear axles
which will cause excessive tire wear
and may damage the transmission,
transfer case and differential gears.
Wheel balanceUnbalanced wheels may affect vehicle handling
and tire life. Even with regular use, wheels can
get out of balance. Therefore, they should be
balanced as required.
Wheel balance service should be performed
with the wheels off the vehicle. Spin balancing
the rear wheels on the vehicle could lead to
mechanical damage.
For additional information regarding tires, refer
to “Important Tire Safety Information” (US) or
“Tire Safety Information” (Canada) in the War-
ranty Information Booklet.Care of wheels.
Wash the wheels when washing the vehicle
to maintain their appearance.
. Clean the inner side of the wheels when the
wheel is changed or the underside of the
vehicle is washed.
8-38
Maintenance and do-it-yourself
, Q I R U P D W L R Q 3 U R Y L G H G E \
Black plate (276,1)
Model "R35-D" EDITED: 2008/ 5/ 20
5. Remove the wheel nuts and then remove thewheel.NOTE:When putting a wheel on the ground, put it
down with the outer side of the wheel
facing up to prevent scratching of the
wheel surface.
6. Clean any mud or dirt from the surfacebetween the brake disc rotor
*1
and wheel
*2.
7. Tighten the wheel nuts by hand by turningthem clockwise until the tapered part
*A
of
each nut lightly contacts the seat part
*B
of
the wheel hole.
When replacing a front wheel, make sure the
hole in the wheel is aligned with the pin on
the brake disc rotor.
8-42
Maintenance and do-it-yourself
, Q I R U P D W L R Q 3 U R Y L G H G E \
Black plate (1,1)
10 Index
A
Additional maintenance items ................... GTR-6
Air cleaner .......................................... 8-19
Air conditioner Air conditioner specification label ............ 9-10
Air conditioning system refrigerant and
lubricant recommendations ......................... 9-5
All-season tires ................................... GTR-5
All-Wheel Drive .................................... 5-34
All-Wheel Drive driving safety precautions ........ 5-7
Aluminum alloy wheels .............................. 7-3
Anti-freeze .......................................... 5-42
Anti-lock Braking System ......................... 5-39
Anti-lock Braking System warning ................ 2-34
Audible reminders ................................. 2-30
Automatic Automatic door lock system .................... 3-5
Average fuel consumption and speed ............ 2-15
Avoiding collision and rollover ...................... 5-5
AWD clutch high temperature warning .......... 2-35
AWD system characteristics ...................... 5-35
AWD system warning ............................. 2-36
AWD warning light ................................ 5-34
B
Battery ....................................... 5-42, 8-15
Intelligent Key battery discharge .............. 5-10
Intelligent Key battery discharge indicator . . . 2-42
Intelligent Key battery replacement ........... 8-23
Before starting the engine ........................ 5-11
Body repair ....................................... GTR-5 Booster seat installation
........................... 1-29
Booster seats ...................................... 1-27
Brake Brake assist .................................... 5-39
Brake dust .................................... GTR-9
Brake fluid ............................. GTR-3, 8-14
Brake pad and disc rotor .................... GTR-3
Brake pad wear indicators .................... 8-20
Brake system ................................... 5-38
Brakes .......................................... 8-20
High performance brake system .............. 8-21
Inspection and adjustments of tires,
suspension and brakes ...................... GTR-6
Low brake fluid warning ....................... 2-34
Parking brake .................................. 5-27
Parking brake break-in ......................... 5-39
Parking brake release warning ................ 2-34
Replacing the brake pads ..................... 8-21
Self-adjusting brakes .......................... 8-20
Braking precautions ............................... 5-38
Break-in schedule .................................. 5-32
C
Capacities and recommended fuel/lubricants ..... 9-2
Changing Changing engine coolant ...................... 8-11
Changing engine oil and filter ................. 8-12
Changing wheels and tires .................... 8-37
Checking Checking bulbs ................................ 2-23
Checking engine coolant level ................ 8-11
Checking engine oil level ...................... 8-12 Checking the tire pressure
.................... 8-32
Child restraint installation using LATCH. ......... 1-17
Child restraint installation using the seat
belts ................................................. 1-21
Child restraints ..................................... 1-13
Child safety ........................................... 1-7
Chrome parts ........................................ 7-3
Cleaning ............................................ 8-19
Cleaning exterior ..................................... 7-2
Cleaning interior ..................................... 7-4
Clearing the programmed information ............ 2-63
Closing the fuel-filler door ........................ 3-24
Closing the hood .................................. 3-18
Coat hooks ......................................... 2-56
Cockpit ............................................... 2-2
Cold weather driving .............................. 5-42
Console box ........................................ 2-56
Cool down ........................................ GTR-7
Coolant Changing engine coolant ...................... 8-11
Checking engine coolant level ................ 8-11
Coolant mixture ratio ......................... GTR-7
Draining of coolant water ..................... 5-42
Engine coolant temperature gauge ............. 2-6
Replenishing coolant ........................ GTR-6
Corrosion protection ................................. 7-5
Cruise control ............................... 2-14, 5-28
Cruise control operations ......................... 5-29
Cruise control system warning .................... 2-37
Cup holders ........................................ 2-53
Current fuel consumption ......................... 2-14
Model "R35-D" EDITED: 2008/ 5/ 20
, Q I R U P D W L R Q 3 U R Y L G H G E \