2009 NISSAN ALTIMA HYBRID tires

[x] Cancel search: tires

Page 92 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual High-voltage battery warning
light
This light may appear during the following condi-
tions:
cThe high voltage battery voltage drops due
to the shift selector being left in “N”.
– The Hybrid Syst

Page 93 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual WARNING
cIf the light does not illuminate with the
ignition switch placed in the ON posi-
tion, have the vehicle checked by a
NISSAN dealer as soon as possible.
cIf the light illuminates while driving

Page 100 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual Alert mode
The alert mode allows you to set alerts notifying
you of time to rest or icy conditions.
The time to rest alert lets you know when you
have been traveling for a long time and may need
a bre

Page 230 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual c. You notice a change in the sound of
the exhaust system.
d. You have had an accident involving
damage to the exhaust system, un-
derbody, or rear of the vehicle.
THREE-WAY CATALYST
The three-way cat

Page 231 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual subsequent vehicle start-ups as long as the mal-
function exists. When the malfunction indicator is
illuminated, the system may not be able to detect
or signal low tire pressure as intended. TPMS
malf

Page 232 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual cWhen a spare tire is mounted or a wheel
is replaced, tire pressure will not be
indicated, the TPMS will not function
and the low tire pressure warning light
will flash for approximately 1 minute.
The

Page 233 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual OFF-ROAD RECOVERY
While driving, the right side or left side wheels
may unintentionally leave the road surface. If this
occurs, maintain control of the vehicle by follow-
ing the procedure below. Plea

Page 237 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual 2. Place the ignition switch in the OFF or
LOCK position, and wait approximately 10
seconds.
3. Repeat steps 1 and 2.
4. Restart the engine while holding the device
(which may have caused the interfer
Page:   1-8 9-16 17-24 25-32 33-40 ... 48 next >