2009 NISSAN ALTIMA HYBRID engine oil

[x] Cancel search: engine oil

Page 275 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual 8 Maintenance and do-it-yourself
Maintenance requirements..........................8-2
General maintenance..............................8-2
Explanation of general maintenance items.........8-2
Mainten

Page 279 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual Seat beltsCheck that all parts of the seat belt
system (for example, buckles, anchors, adjusters
and retractors) operate properly and smoothly,
and are installed securely. Check the belt web-
bing for

Page 281 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual cNever get under the vehicle while it is
supported only by a jack. If it is neces-
sary to work under the vehicle, support
it with safety stands.
cKeep smoking materials, flame and
sparks away from th

Page 282 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual 1. Brake fluid reservoir
2. Engine oil filler cap
3. Air cleaner
4. Fuse/Fusible link box/Jump-start
location
5. Fuse box
6. Inverter coolant reservoir
7. Engine oil dipstick
8. Radiator cap
9. Drive

Page 285 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual CHECKING INVERTER COOLANT
LEVEL
Check the coolant levelin the reservoir when
the engine and inverter are cold.If the cool-
ant level is below the MIN level
sB, add coolant to
the MAX level
sA.
If the

Page 286 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual 5. Remove the dipstick again and check the oil
level. It should be between the H (High) and
L (Low) marks
sB. This is the normal oper-
ating oil level range. If the oil level is below
the L (Low) mark

Page 287 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual 5. Remove the drain plugsBwith a wrench by
turning it counterclockwise and completely
drain the oil.
If the oil filter is to be changed, remove and
replace it at this time. See “Changing engine
oil

Page 288 of 353

NISSAN ALTIMA HYBRID 2009 L32A / 4.G Owners Manual CAUTION
Be careful not to burn yourself. The engine
oil may be hot.
5. Wipe the engine oil filter sealing surface with
a clean rag.
CAUTION
Be sure to remove any old gasket material
remaining on the s
Page:   < prev 1-8 9-16 17-24 25-32 next >