2009 MAZDA MODEL CX-9 keyless

[x] Cancel search: keyless

Page 98 of 538

MAZDA MODEL CX-9 2009  Owners Manual (in English) Black plate (98,1)
qAuxiliary Key Function
Use the auxiliary key stored in the
advanced key in the event of a dead
transmitter battery or malfunction.
Removing the auxiliary key
Pull out the auxiliary

Page 99 of 538

MAZDA MODEL CX-9 2009  Owners Manual (in English) Black plate (99,1)
Warning and Beep Sounds
qSystem Malfunction Warning Beep
If any malfunction occurs in the advanced
keyless function, the KEY warning light
(red) in the instrument cluster illuminate

Page 100 of 538

MAZDA MODEL CX-9 2009  Owners Manual (in English) Black plate (100,1)
qRequest Switch Inoperable
Warning Beep
If the request switch for a front door or the
liftgate is pressed under the following
conditions while the advanced key is
being carried, a

Page 101 of 538

MAZDA MODEL CX-9 2009  Owners Manual (in English) Black plate (101,1)
Setting Change (Function Customization)
The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.
Setting Function At Initial

Page 102 of 538

MAZDA MODEL CX-9 2009  Owners Manual (in English) Black plate (102,1)
When Warning Indicator/Beep is Activated
Under the following conditions, warning beeps are heard and a warning/indicator light in
the instrument cluster illuminates to notify the d

Page 104 of 538

MAZDA MODEL CX-9 2009  Owners Manual (in English) Black plate (104,1)
Key extend/retract method (Retractable
type key)
To extend the key, press the release
button.
To retract the key, rotate it into the holder
while pressing the release button.
Keyle

Page 105 of 538

MAZDA MODEL CX-9 2009  Owners Manual (in English) Black plate (105,1)
NOTElThe keyless entry system is designed to
operate up to about 2.5 m (8 ft) from the
center of the vehicle, but this may vary due
to local conditions.
lThe system does not operat

Page 108 of 538

MAZDA MODEL CX-9 2009  Owners Manual (in English) Black plate (108,1)
5. Put in the new battery (CR1620 or
equivalent) with the positive pole (
)
facing down.
6. Align the front and back covers and
snap the transmitter shut.
7. Align the key with the
Page:   < prev 1-8 9-16 17-24 25-32 33-40 next >