Black plate (23,1)
qSplit-Folding Rear Seatback
The seatbacks can be folded down to
provide more space in the trunk.
To fold down the seatbacks
WARNING
Always remove the child-restraint
system from the rear seat before
operating the straps (in trunk) for the
rear seat:
Operating (pulling) the straps (in
trunk) while a rear-facing child-
restraint system is in the rear seat is
dangerous. It could cause injury to a
child seated in the child-restraint
system when the seatback suddenly
flips forward.
Make sure there is nobody in the rear
seat area before operating (pulling) the
straps (in trunk): Not checking the rear seat area for
persons before folding the seatbacks
down with the straps (in trunk) is
dangerous. The rear seat area is
difficult to see from the rear of the
vehicle. Operating (pulling) the straps
(in trunk) without checking could
cause injury to a person when a
seatback suddenly flips forward.
CAUTION
Before folding the seatbacks down
with the straps (in trunk), make sure
there is no cup in a rear cup holder.
Folding the seatbacks with the straps
(in trunk) while a cup is in the cup
holder could soil or damage the seat
bottom and seatback.
CAUTION
Be careful of the following when
using the straps (in trunk):
On a downward slope, the seatback
could flip forward faster than on a
flat surface.
1. After checking that the rear seats are clear, open the trunk and pull the straps
(in trunk) on the left and right sides of
the trunk.
2. Open the rear door and fold the rearseatbacks forward.
To return the seatbacks to the uprightposition
1. Lift the seatbacks upright.
2. Pull on the top of the seatbacks frominside the vehicle to make sure they are
locked.
WARNING
Always make sure the seat belts are
fully pulled out from under the
seatbacks: A seat belt caught under a seatback
after the seatback is returned to its
upright position is dangerous. In a
collision or sudden stop, the seat belt
cannot provide adequate protection.
Essential Safety Equipment
Seats
2-11
Mazda6_8Z64-EA-08H_Edition1 Page23
Wednesday, June 25 2008 10:3 AM
Form No.8Z64-EA-08H
Black plate (116,1)
Hood
WARNING
Always check that the hood is closed
and securely locked:A hood that is not closed and
securely locked is dangerous as it
could fly open while the vehicle is
moving and block the driver's vision
which could result in a serious
accident.
qOpening the Hood
1. With the vehicle parked, pull the
release handle to unlock the hood.
Release handle
2. Insert your hand into the hood opening
and slide the hood latch lever to the
right and lift the hood.
3. Grasp the support rod in the paddedarea and secure it in the stay hole
indicated by the arrow to hold the hood
open.
Support rod Clip
Pad
q
Closing the Hood
WARNING
Do not leave items in the engine
compartment:
After you have finished checking or
doing servicing in the engine
compartment, do not forget and
leave items such as tools or rags in
the engine compartment.
Tools or other items left in the engine
compartment could cause engine
damage or a fire leading to an
unexpected accident.
1. Check under the hood area to make certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Insert the support rod in its clip while holding up the hood. Verify that the
support rod is secured in the clip before
closing the hood.
3. Close the hood so that it locks securely.
3-46
Knowing Your Mazda
Doors and Locks
Mazda6_8Z64-EA-08H_Edition1 Page116
Wednesday, June 25 2008 10:3 AM
Form No.8Z64-EA-08H
