2009 MAZDA MODEL 3 4-DOOR tires

[x] Cancel search: tires

Page 277 of 418

MAZDA MODEL 3 4-DOOR 2009  Owners Manual Black plate (277,1)
7. Have the flat tire repaired or replacedas soon as possible.
WARNING
Do not drive with any tires that have
incorrect air pressure: Driving on tires with incorrect air
pressure is

Page 289 of 418

MAZDA MODEL 3 4-DOOR 2009  Owners Manual Black plate (289,1)
8Maintenance and Care
How to keep your Mazda in top condition.
Introduction .................................................................................. 8-2Introduction .....

Page 323 of 418

MAZDA MODEL 3 4-DOOR 2009  Owners Manual Black plate (323,1)
Tires
For reasons of proper performance, safety,
and better fuel economy, always maintain
recommended tire inflation pressures and
stay within the recommended load limits
and weigh

Page 324 of 418

MAZDA MODEL 3 4-DOOR 2009  Owners Manual Black plate (324,1)
NOTElAlways check tire pressure when tires are
cold.
lWarm tires normally exceed recommended
pressures. Dont release air from warm tires
to adjust the pressure.
lUnderinflation ca

Page 325 of 418

MAZDA MODEL 3 4-DOOR 2009  Owners Manual Black plate (325,1)
NOTE
(With Tire Pressure Monitoring System)lWhen tires with steel wire reinforcement in
the sidewalls are used, the system may not
function correctly even with a genuine
wheel.
Ref

Page 326 of 418

MAZDA MODEL 3 4-DOOR 2009  Owners Manual Black plate (326,1)
NOTE
Tires degrade over time, even when they are
not being used on the road. It is recommended
that tires generally be replaced when they are
6 years or older. Heat caused by hot c

Page 347 of 418

MAZDA MODEL 3 4-DOOR 2009  Owners Manual Black plate (347,1)
qWater Marks
Occurrence
Rain, fog, dew, and even tap water can
contain harmful minerals such as salt and
lime. If moisture containing these
minerals settles on the vehicle and
evap

Page 351 of 418

MAZDA MODEL 3 4-DOOR 2009  Owners Manual Black plate (351,1)
qAluminum Wheel Maintenance
A protective coating is provided over the
aluminum wheels. Special care is needed
to protect this coating.
NOTE
lDo not use a wire brush or any abrasive