2009 Lancia Thesis transmission oil

133
Electronic automatic transmission (COMFORTRONIC)
Warning light/symbol
t
Message
AUTOMATIC
TRANSMISSION FAULT
GO TO
DEALER SLOWLY
AUTOMATIC TRANSMIS-
SION OIL TEMP. HIGH
SWITCH OFF ENGINE,
DO NOT PROCEEDMeaning of the message
Electronic automatic
transmission
(COMFORTRONIC) failure
Electronic automatic
transmission (COMFORTRONIC)
oil
is too hot Action
Drive slowly to the nearest
Lancia Dealership
Turn the engine off and contact
aLancia Dealership
Power steering (VARIOSTEER)
Warning light/symbol
g
Message
POWER STEERING FAULT
GO TO
DEALER SLOWLYMeaning of the message
Power steering
(VARIOSTEER)
failureAction
Drive slowly to the nearest
Lancia Dealership
Suspensions (SKYHOOK - where provided)
Warning light/symbol
‰
Message
SUSPENSION FAULT
GO TO
DEALER SLOWLYMeaning of the message
Suspensions
(SKYHOOK)
failureAction
Drive slowly to the nearest
Lancia Dealership

187
Even in fault conditions it is possi-
ble to move the lever to R,NandD.
If the lever is in position D,the con-
trol unit of the automatic gearbox
will select only certain gears, accord-
ing to the type of failure detected.
In case of failure of the
automatic gearbox, take
the car immediately to a
Lancia Dealership to have the
failure eliminated.FAILURE INDICATION
Automatic gearbox faults are indi-
cated by multifunction display
warning light tcoming on with
the following messages:
– AUTOMATIC TRANSMISSION
OIL TEMP. HIGH
– AUTOMATIC TRANSMISSION
FAULT.
Automatic transmission oil tem-
perature high
This message is displayed when the
gearbox oil has reached the maxi-
mum preset temperature. In this
case the electronic control unit has
an emergency programme.
Anyway, it is suggested to stop the
car, to set the lever to PorNand to
keep the engine running idle until
the message displayed disappears.
Then start driving again without
taxing the engine.If the message is displayed again,
re-stop the car and let the engine
run idle until the message disap-
pears.
If the interval between the first and
second message appearance is lower
than 15 minutes, stop the car, stop
the engine and wait until the engine-
gearbox unit is completely cold.
Automatic transmission fault
If this message is displayed during
driving, it means that there is a fail-
ure in the automatic gearbox. In this
case the electronic control unit has
an emergency programme.
In such conditions, stop the car and
stop the engine for at least 1 minute.
When the engine is restarted, the
self-diagnosis system could exclude
that failure, that however will be
stored by the electronic control unit.

365
Use
(*) IMPORTANT Do not top up or mix with fluids having characteristics different from those specified.
(❒)When the vehicle is used under particularly harsh climate conditions, we recommend using a 60-40 mixture of PARAFLU UP and
demineralised water.
Applications
Mechanical gearbox and
differential petrol version
Mechanical gearbox and
differentials, diesel versions
Power steering
5-speed automatic
transmission
CV joints on wheel side
CV joints on differential
side
Brake and clutch hydraulic
control
Cooling circuits
Proportion:
50% water and
50% PARAFLU UP
To be used diluted
or undiluted Original fluids
and lubricants
TUTELA CAR TECHNYX
Contractual Technical
Reference N° F010.B05
TUTELA CAR MATRYX
Contractual Technical
Reference N° F108.F02
TUTELA GI/E
ContractualTechnical
Reference N° F001.C94
TUTELA GI/V
ContractualTechnical
Reference N° F333.105
TUTELA ALL STAR
Contractual Technical
Reference N° F702.G07
TUTELA STAR 325
Contractual Technical
Reference N°F301.D03
TUTELA TOP 4
Contractual Technical
Reference N° F001.A93
PARAFLU UP (*)
Contractual Technical
Reference N° F101.M01
TUTELA
PROFESSIONAL SC 35
Contractual Technical
Reference N° F201.D02
Fluid and lubricant specifications
for correct car operation
Synthetic-based oil, grade SAE 75W-85 that passes
API GL 4 specifications Plus, Fiat 9.55550.
Synthetic-based oil, grade SAE 75W-85, that pass
API GL4 specifications.
"ATF DEXRON III" oil..
Special lubricant for 5-speed transmissions with
controlled slip torque converters
Grease containing Molybdenum bisulphide for high
temperature appliances. N.L.G.I. 1-2 consistency.y
Poly-urea oil synthetic-based grease suitable for high
temperatures. NL.GI. 2 consistency
Synthetic fluid FMVSS no. 116, DOT 4, ISO 4925,
SAE J-1704 CUNA NC 956-01
Protective with antifreeze action, red colour based on in-
hibited monoethylen glycol and organic formula, that
passes CUNA NC 956-16, ASTM D 3306 specifications
Mixture of alcohol, water and surfactants
CUNA NC 956-11 Brake fluid Transmission
and hydraulic
power steering
lubricants and
greases
Protective agent
for radiators
Windscreen/
headlight washer
fluid