2009 Lancia Musa language

27
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Day
YearMonth Example:
EXITING THE MENUSPEED BEEP.CLOCK SETTING
LIGHT SENS.TRIP B
CLOCK MODE
SETTING THE DATE
KEY
DIST. UNIT
VOL. BUTTONS
VOL. BUZZER SERVICE
LANGUAGETEMP. UNIT
Example:
– +
+– – –
+ +
–
–
+
+++
–––
+ +
–
MODE
brief button
pressing
From the standard screen, briefly press button MODE
to start browsing. Press +or–to browse within the
menu. NOTE Only the short menu may be accessed for
reasons of safety while the car is moving (“Brightness”
and “Speed Beep” settings). Stop the car to access the
full menu. In cars equipped with a Connect Nav+ sys-
tem, many functions are viewed from the navigator dis-
play.
–
+ +
–
MODE
brief button
pressing
Deutsch
English
Español
Italiano
Português
Français
(*) This function may only
be displayed after the SBR
system is deactivated by a
Lancia Dealership.
fig. 31
+
– +
–+
–
+
–
+
–
CONSUMPTION BAG. PASS.
BELT BUZZ.
(*) where provided
007-037 MUSA 1ed GB 10-07-2008 9:36 Pagina 27

32
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Adjusting the failure/warning buzzer
volume (Buzzer Volume)
With this function the volume of the
buzzer accompanying any
failure/warning indication can be ad-
justed according to 8 levels. To adjust
the desired volume proceed as follows:
– briefly press button MODE: the pre-
viously set volume “level” starts flash-
ing on the display;
– press button +or–for selecting the
desired volume level;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go back
to the standard screen without storing
the settings. Selecting the language (Language)
The messages can be displayed in the
following languages: Italian, German,
English, Spanish, French, Portuguese.
To set the required language proceed
as follows:
– briefly press button MODE: the pre-
viously set “language” starts flashing
on the display;
– press button +or–for selecting the
desired language;
– briefly press button MODEto go back
to the menu screen or press the button
for a prolonged time to go back to the
standard screen without storing the set-
tings. Setting the temperature unit (Temp.
unit)
This function enables setting of the re-
quired temperature unit (either °C or
°F).
To set the required unit proceed as
follows:
– briefly press button MODE: either
°C or °F starts flashing on the display
(depending on the previously set pa-
rameter);
– press button +or–for selecting the
desired value;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go
back to the standard screen without
storing the settings.
007-037 MUSA 1ed GB 10-07-2008 9:36 Pagina 32

143
WARNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
The small spare wheel is
specific for your car. Do not
use it on cars of different models. Do
not use spare wheels of different
models on your car. The small spare
wheel must only be used in an emer-
gency. Never use it for more than
strictly necessary and never exceed
80 km/h. On the small spare wheel
there is an orange label, summariz-
ing the main warnings regarding
small spare wheel usage restrictions.
Never remove or cover the label.
Never apply any hub cap on the
small spare wheel. The label con-
tains the following indications in
four languages: Warning! For tem-
porary use only! 80 km/h max! Re-
place the standard wheel as soon as
possible. Do not cover this instruc-
tion.
WARNING
The driving characteristics
of the car are different
when the small spare wheel is in-
stalled. Avoid violent accelerations
and braking, sharp steering and fast
bending. The overall duration of the
small spare wheel is of about 3000
km, after which the relevant tyre
must be replaced with another one
of the same type. Never install a tra-
ditional tyre on a rim designed to be
used as a small spare wheel. Repair
and refit the standard wheel as soon
as possible. Using two or more small
spare wheels at the same time is for-
bidden. Do not apply grease to the
bolt threading before assembly: they
might come unscrewed.
WARNING
The jack may only be used
to replace wheels on the car
which it equips or other cars of the
same model. Never use the jack for
other purposes, such as lifting other
car models. Never use the jack to
carry out repairs under the car. In-
correct positioning of the jack may
cause the car to fall. Do not use the
jack for loads higher than those
shown on the label. Never install
snow chains on the small spare
wheel; if a front tyre (driving wheel)
is punctured and you need to use
snow chains, use a standard wheel
from the rear axle and install the
small spare wheel on the rear axle.
This way, with two normal front dri-
ving wheels, you can install the snow
chains on them, thus resolving the
emergency.
WARNING
135-164 MUSA 1ed GB 10-07-2008 9:38 Pagina 143