2009 LAMBORGHINI MURCIÉLAGO drive
[x] Cancel search: drivePage 199 of 1173
1
L824 01 00 05
Fig.1
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
( Q J L Q H D V V H P E O \
7 K L V R S H U D W L R Q U H T X L U H V D F D U O L I W D Q G D K R L V W Z L W K D U R F N L Q J O H Y H U D Q G F K D L Q V W R V O L Q J W K H H Q J L Q H W R E H ¿ [ H G R Q W K H H [ K D X V W P D Q L I R O G K R R N V
1. Lift the vehicle on the car lift 20 cm from the ground.
2. Fix the four engine extraction frame to the engine side eyes and lift the whole engine-drive assembly very
carefully directing it by hand to prevent it from hurting any vehicle part.
3. After the engine-drive assembly has been inserted, let the vehicle down the car lift.
4. Connect the air conditioning system compressor pipes (026005).
5. Insert the two silencer hood brackets.
6. Insert the power steering pipes (042305).
7. Connect the lower water pipe between the engine and radiator.
8. Fix the crossbar.
9. Connect the knock sensor (4) wiring harness, the phase transformers (2) (019005)and the MAPS (2).
10. Connect the catalyst temperature sensors (025405)and the thermocouple and oxygen sensor cables
(025305).
11. Connect the injection (side) and the ignition (front) cables.
12. Connect the alternator cables (090305).
13. & R Q Q H F W W K H Z K L W H F R Q Q H F W R U W R W K H H Q J L Q H À \ Z K H H O
14. Connect the ground cables from the head 7-12.
15. Insert the canister-head 1-6 pipe.
16. Fix the rear stabilizer bar and move it forwards (051105).
17. Assemble the silencer tightening the rear mounting devices (not the bolts with springs) (025105).
18. Lift the vehicle on the car lift.
19. Reattach the silencer mounting devices (025105).
Page 200 of 1173
2
L824 01 00 05
Fig.2
A
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
8 Q G H U W K H Y H K L F O H 20.
6 X S S R U W W K H J H D U E R [ E \ P H D Q V R I D V S H F L ¿ F O L I W L Q J G H Y L F H E \ L Q V H U W L Q J D Z R R G H Q S L H F H (A-Fig.2 ) and lever by
means of a crowbar to move the engine towards the rear part in order to disconnect the front differential from
the drive pipe.
21. Move the axle shafts toward the rear differential.
22. Remove the end of the clutch oil pipe and reconnect it.
23. Connect the cable (positive) of the starter (091105).
24. Screw the two engine side 24-mm mounting bolts.
25. Secure the shaft to the front differential (052105).
26. Reposition the rear axle shaft screws (6 per side) and connect the rear axle shafts (050105).
27. Reposition the ground plaited cable on the left side of the engine.
28. Secure the front drive mounting bolts (030105).
29. Connect the silencer mounting devices (025105).
30. Assemble the lower front drive cross member elements (052105).
31. From inside the vehicle assemble the panel and the gearshift on the tunnel (086805).
32. Tighten the clamps while protecting the exhaust terminals (025105).
33. Connect the inlet and outlet pipe from the oil pan (011705).
34. Fill the oil pan completely (about 2 liters) (011708).
35. Fill engine oil tank (about 9 liters) (011708).
Page 201 of 1173
3
L824 01 00 05
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
36.Lower the car.
37. Connect the breather pipe from the water runnel.
38. Connect the upper water pipe between the engine and radiator.
39. Connect the driver side canister pipes.
40. Connect the passenger side VIS/VES solenoid valve pipes.
41. Position the brake booster and NCS vacuum pipes (if present).
42. Secure the driver side ignition connector.
43. Secure the oil breather pipes from the engine oil tank.
44. Secure the fuel pipes to the injection rails and the return pipes to the tank (012805).
45. Reposition the driver side intake box (013305).
46. Secure the upper panel.
47. Connect the vacuum pipes to the left and right heads.
48. Secure the engine compartment central panel (081305).
49. Position the silencer heat-proof covering (025105).
50. Assemble the engine hood lock (082705)and reattach the connectors.
51. 6 H F X U H W K H U H D U ¿ Q L V K J U L G W D N L Q J F D U H R I W K H O L F H Q V H S O D W H O L J K W V (081305 - 094305).
52. $ V V H P E O H X S S H U S D U W R I E R W K D L U ¿ O W H U L Q W D N H E R [ H V D Q G F R Q Q H F W W K H D L U L Q W D N H S L S H V P R X Q W L Q J F O D P S V (013305)
to the DBW.
53. Assemble the side panels and the silencer safety grid (025105).
54. Assemble the engine hood shock absorber lower mounts and reposition the engine hood (082705).
, ) 7 + ( 5 ( , 6 $ 1 ( * ( $ 5 1 ( 9 ( 5 ' , 6 & 2 1 1 ( & 7 7 + ( 2 , / 3 , 3 ( 6 / ( $ 9 ( 7 + ( 2 , / 3 $ 1 & 2 1 1 ( & 7 ( '
7 2 7 + ( * ( $ 5
5 ( & 2 1 1 ( & 7 $ / / 2 ) 7 + ( ( * ( $ 5 : , 5 ( 6
Page 272 of 1173
1
L824 01 21 00
Fig.1
A
B
C
D
E
FG
H
I
L
MN
O
P
Q
R
S
TU
VZXF
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Closed loop cooling system with forced circulation by crankshaft belt-driven centrifugal pump. Thermostatic valve
and double rear radiator.A. Climate control system
B. 0 L Q L P X P À R Z U D W H V R O H Q R L G Y D O Y H
C. 0 L Q L P X P À R Z U D W H S X P S
D. Water outlet from heads
E. Radiator expansion tank
F. Bleed from heads
G. Breather pipe from radiator
H. 0 D Q L I R O G ¿ O O L Q J X S I U R P U D G L D W R U V
I. RH radiator
L. Manifold pipe from radiators
M. LH radiator
N. Tank bleed manifold
O. Manifold pipe to radiators
P. Belt tensioner
Q. Water pump belt
R. Water pump pulley
S. Water pump O-ring
T. Water pump
U. Water manifold from heads
V. Water temperature sensor
Z. Thermostatic valve
X. Thermostatic valve body
Page 307 of 1173
![LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual 2
L824 01 29 00
Fig.3
AB
CD
(
F
Fig.2
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \](/manual-img/62/57187/w960_57187-306.png "LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual 2
L824 01 29 00
Fig.3
AB
CD
(
F
Fig.2
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \")
2
L824 01 29 00
Fig.3
AB
CD
(
F
Fig.2
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Throttle bodies ) L J
7 K H W K U R W W O H E R G L H P H W H U V W K H H Q J L Q H D L U À R Z U D W H D Q G W K H Q W K H S R Z H U G H Y H O R S H G E \ W K H H Q J L Q H D F F R U G L Q J W R W K H
requests of LIE control units received by CAN lines. The LIEs create these requests according to PA and RPM parameters, and operating strategies at idle and start-up.
Each throttle bodie has a throttle controlled by an actuator that receives opening information from the ETB ECU.
There are 2 feedback potentiometers inside the throttle that read its position in order to diagnose any malfunctioning
of the throttle body and send the information to the ETB ECU (which forwards the information to the 1-5 cylinder bank LIE).
' R Q R W G L V D V V H P E O H W K H W K U R W W O H E R G L H E X W R Q O \ F O H D Q L W
9 , 6 6 \ V W H P 9 D U L D E O H , Q W D N H 6 \ V W H P
7 R R S W L P L ] H W K H L Q W D N H P D Q L I R O G À X L G P H F K D Q L F V H D F K S O H Q X P L V H T X L S S H G Z L W K W K U R W W O H V G U L Y H Q E \ S Q H X P D W L F
D F W X D W R U V W K D W D O O R Z V W R P R G L I \ W K H L Q W D N H U H V R Q D Q F H I U H T X H Q F L H V , Q W K L V Z D \ W K H ¿ O O L Q J X S R I W K H F \ O L Q G H U V D W different engine speed is improved; the torque output is thus optimized.
The pneumatic actuators are driven by control solenoid valves directly managed by the LIEs according to the engine coolant temperature (the system is disabled at temperatures < 60°C) and engine rpm.
9 , 6 V \ V W H P F R P S R Q H Q W V ) L J
A. PLENUM VLV
B. PLENUM
C. BYPASS
D. BYPASS VLV
( Pneumatic actuator
F. Control solenoid valves
Page 335 of 1173
1
L824 01 42 01
Fig.1
B
A
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
& K H F N L Q J W K H F O X W F K W K L F N Q H V V
1. Connect the OBD2 ( A-Fig.1) outlet to the port of the “LARA-AS” software system ( B-Fig.1) on the driver side
under the steering wheel (109000).
To establish the connection between the control unit and the PC, use the BASIC.XScable(000200-48a)
and the cable for LARA-AS diagnostics interface (000200-48b).
3. 7 X U Q W K H Y H K L F O H ¶ V L J Q L W L R Q N H \ W R W K H ¿ U V W S R V L W L R Q V R W K D W H O H F W U L F D O S R Z H U D U U L Y H V D W W K H R X W O H W
4. Check the clutch thickness on the connected CPU.
, I F O X W F K W K L F N Q H V V U H D G L Q J P H D V X U H P H Q W L V X V H G W K H V \ V W H P D X W R P D W L F D O O \ S U R Y L G H V W K H G L I I H U H Q F H E H W Z H H Q W K H F K D Q Q H O V Z K H U H W K H F O X W F K W K L F N Q H V V L V L Q G L F D W H G
7 K H G L I I H U H Q F H P X V W E H F D O F X O D W H G P D Q X D O O \ R Q O \ Z K H Q D O O R I W K H 6 1 $ 3 6 + 2 7 S D U D P H W H U V D U H U H D G • 7 K H F X U U H Q W F O X W F K W K L F N Q H V V L V V X S S O L H G R Q F K D Q Q H O
• 7 K H L Q L W L D O F O X W F K W K L F N Q H V V D W W K H W L P H R I D V V H P E O \ L V V X S S O L H G R Q F K D Q Q H O
7 K H G L I I H U H Q F H E H W Z H H Q W K H L Q L W L D O W K L F N Q H V V D Q G W K H F X U U H Q W W K L F N Q H V V P X V W Q H Y H U E H P R U H W K D Q mm.
, I W K H G L I I H U H Q F H L V P R U H W K D Q P P W K H F O X W F K L W V H O I P X V W E H L P P H G L D W H O \ U H S O D F H G
Page 346 of 1173
1
L824 01 42 06
Fig.2
Fig.1
Fig.3
F
E
BA
C
D
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Clutch bleeding (E-Gear) 3 U H O L P L Q D U \ R S H U D W L R Q V •
Disassemble the engine safety cover (081303).
Clutch bleeding
1. Connect a pipe ( A-Fig.1) to the clutch bleeder ( B-Fig.2) located in the front part of the engine.
2. Place a container for collecting the used oil ( C-Fig.1) under the end of the pipe.
3. Open the clutch bleeder using the two nuts that secure it ( D-Fig.2) (tighten the lower nut and loosen the upper
nut).
4. Connect the OBD2 outlet ( E-Fig.3) to the port of the “LARA-AS” software system ( F-Fig.3) on the driver side
under the steering wheel
(109000).
To establish the connection between the control unit and the PC, use the BASIC.XScable and the BASIC.KS
cable (000200-48a) .
Use the / $ 5 $ $ 6 V \ V W H P 0 H D V X U H P H Q W ¿ O H ± F O X W F K E O H H G L Q J
5. 7 X U Q W K H Y H K L F O H ¶ V L J Q L W L R Q N H \ W R W K H ¿ U V W S R V L W L R Q V R W K D W H O H F W U L F D O S R Z H U D U U L Y H V D W W K H R X W O H W
6. Start the bleed process through the CPU, opening the circuit.
7. Keep the circuit open 10-15 seconds.
8. After 10-15 seconds stop the operation through the CPU.
9. Repeat the operation two more times (three times altogether), letting the oil drain from the pipe connected to
the bleeder.
10. : K H Q E O H H G L Q J K D V ¿ Q L V K H G U H V W R U H W K H L Q L W L D O F R Q G L W L R Q V
Page 396 of 1173
![LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual 1
L824 02 60 00
A
C
FGHLIEDB
N
M
Fig.1
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \](/manual-img/62/57187/w960_57187-395.png "LAMBORGHINI MURCIÉLAGO 2009 Service Repair Manual 1
L824 02 60 00
A
C
FGHLIEDB
N
M
Fig.1
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \")
1
L824 02 60 00
A
C
FGHLIEDB
N
M
Fig.1
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Air conditioning system
7 K H D L U F R Q G L W L R Q L Q J V \ V W H P S U R Y L G H G Z L W K W K H Y H K L F O H K R O G V W K H W H P S H U D W X U H D Q G D L U À R Z L Q W K H S D V V H Q J H U F R P S D U W P H Q W to the values set by the driver through a special push-button panel. The air conditioning system has the following features:•automatic temperature-ventilation-air distribution control functions;
• with recirculation function;
• Z L W K D L U À R Z G L V W U L E X W L R Q I X Q F W L R Q
The system operation is controlled by a special control unit through the driver’s commands set on a push-button S D Q H O ¿ W W H G R Q W K H W X Q Q H O
Air conditioning push-button panel (Fig.1)
A. TEMP + button
B. TEMP – button
C. AIR + button
D. AIR – button
E. VENT button
F. BI-LEVEL button
G. HEAT button
H. DEFROST button
I. TEXT button
L. AUTO button
M. RECIRCULATION button
N. Display