2009 LAMBORGHINI MURCIÉLAGO steering
[x] Cancel search: steeringPage 226 of 1173
1
L824 01 05 03
Fig.1 Fig.2
Fig.3
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
& U D Q N V K D I W D Q G E H D U L Q J G L V D V V H P E O H 3 U H O L P L Q D U \ R S H U D W L R Q V • Engine disassemble (010003)
• Thermostatic valve disassemble (012103)
• Gearbox disassemble (030103)
• Silencer and exhaust terminals disassemble (025103)
• Exhaust manifolds disassemble (025103)
• Air intake manifold disassemble (012903)
• Alternator, power steering pump and air conditioning system compressor frame disassemble.
• Head disassemble (010303)
• Rear differential disassemble (050903)
• Disassemble the front crankshaft pulley
• Timing system cover disassemble (019003)
• Disassemble the oil pan
• Disassemble the oil draft pipe
• Timing system chain disassemble (019003)
• Oil pump disassemble (011503)
& U D Q N V K D I W D Q G E H D U L Q J G L V D V V H P E O H
1. Fix the crankcase with the lower part facing upwards.
2. Unscrew the bolts which mount the crankcase to the lower part of the crankcase ( Fig.1).
3. Remove the lower part of the crankcase.
4. Remove the connecting rods and the pistons.
5. 5 H P R Y H W K H F U D Q N V K D I W E \ P H D Q V R I D V S H F L ¿ F O L I W L Q J G H Y L F H Fig.2).
6. Check the crankshaft thoroughly for wear or scratches.
7. Remove the bushings from the lower and upper parts of the crankcase ( Fig.3).
Page 231 of 1173
4
L824 01 05 05
Fig.6
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
' X U L Q J W K H D V V H P E O \
15. Install P/N 961195027 liner-stop on the concerned liner to prevent it from moving.
16. Insert the connecting rod-piston assembly in the crankcase, checking that:
• 7 K H F R Q Q H F W L Q J U R G E H D G V I D F H W K H F U D Q N V K D I W V K R X O G H U V
• The numbers printed on the connecting rods caps correspond to the numbers printed on the
connecting rod small end.
17. Apply Molycote 1000 on the threads and on the striking surface of the connecting rod cap bolts and tighten the
bolts; Tightening torque (000800-2a).
18. Then tighten to angle check.
7 L J K W H Q L Q J Y D O X H V D
• Oil pump assemble (011505)
•Timing system chain assemble (019005)
• Assemble the oil draft pipe
• Assemble the oil pan
• Timing system cover assemble (019005)
• Assemble the front crankshaft pulley
•Rear differential assemble (050905)
• Head assemble (010305)
• Alternator, power steering pump and air conditioning system compressor frame assemble.
• Air intake manifold assemble (012905)
• Exhaust manifolds assemble (025105)
• Silencer and exhaust terminals assemble (025105)
• Gearbox assemble (030105)
• Thermostatic valve assemble (012105)
• Engine assemble (010005)
Page 279 of 1173
1
L824 01 22 03
Fig.1 Fig.3
AB
D
Fig.2
CC
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
: D W H U S X P S G L V D V V H P E O \
1 2 7 (
The water pump disassembly/assembly is possible when the power train is on board; in that case, protect the parts under the pump by means of a cloth and position a container under the vehicle to collect thecoolant.
3 U H O L P L Q D U \ R S H U D W L R Q V • Disassemble the silencer safety grid (025103).
3 X P S G L V D V V H P E O \
1. Remove the delivery ( A-Fig.1) and intake pipe mounting clamps on the water pump and remove the pipes ( B-
Fig.1 ).
2.
Remove the rear cross member, unscrewing the 4 screws( C-Fig.2 )of the two inner sides.
3. Remove the auxiliary belt (010103).
4. Remove the 2 screws ( D-Fig.3) that connect the water pump and the power steering pump.
Page 280 of 1173
2
L824 01 22 03
Fig.4
( (
F
GG
H
Fig.5 Fig.6
I
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
5.
Unscrew the 4 screws ( ( ) L J ) that secure the power steering pump support frame ( F-Fig.4), A/C compressor
and alternator.
1 2 7 (
Drain the air conditioning system (026008).
6. Remove the 4 upper screws ( G-Fig.5) and the 2 lower screws ( H-Fig.5) that secure the thermostatic valve
cover.
7. Remove the 3 nuts ( I-Fig.6) that secure the water pump to the timing system cover.
8. Remove the water pump.
Page 281 of 1173
1
L824 01 22 05
Fig.3
DD
E
BB
C
Fig.2
Fig.1
I
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
: D W H U S X P S D V V H P E O \
1.
Position the water pump with a new gasket.
2. Tighten the 3 nuts ( A-Fig.1), securing the water pump to the timing system cover.
3. Position the thermostatic valve cover and secure it by tightening the 4 upper screws ( B-Fig.2) and the 2 lower
screws ( C-Fig.2).
4. Tighten the 4 screws ( D-Fig.3) that secure the power steering pump support frame ( E-Fig.3), A/C compressor
and alternator.
Screw attachment: tightening torque (000800-6d).
Page 282 of 1173
2
L824 01 22 05
Fig.6
Fig.4
IH
F
Fig.5
GG
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
5.
Tighten the 2 screws ( F-Fig.4) that connect the water pump and the power steering pump.
6. Assemble the auxiliary belt (010102).
1 2 7 (
Check that the tension of the auxiliary belt is correct (010102).
7. Assemble the rear cross member, tightening the 4 screws onto the two inner sides
(G-Fig.5 ).
8. Reconnect the water pump delivery and intake pipes ( H-Fig.6), securing them with the clamps ( I-Fig.6).
1 2 7 (
Top up the coolant
(026008) .
• Assemble the silencer safety grid (025105).
Page 335 of 1173
1
L824 01 42 01
Fig.1
B
A
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
& K H F N L Q J W K H F O X W F K W K L F N Q H V V
1. Connect the OBD2 ( A-Fig.1) outlet to the port of the “LARA-AS” software system ( B-Fig.1) on the driver side
under the steering wheel (109000).
To establish the connection between the control unit and the PC, use the BASIC.XScable(000200-48a)
and the cable for LARA-AS diagnostics interface (000200-48b).
3. 7 X U Q W K H Y H K L F O H ¶ V L J Q L W L R Q N H \ W R W K H ¿ U V W S R V L W L R Q V R W K D W H O H F W U L F D O S R Z H U D U U L Y H V D W W K H R X W O H W
4. Check the clutch thickness on the connected CPU.
, I F O X W F K W K L F N Q H V V U H D G L Q J P H D V X U H P H Q W L V X V H G W K H V \ V W H P D X W R P D W L F D O O \ S U R Y L G H V W K H G L I I H U H Q F H E H W Z H H Q W K H F K D Q Q H O V Z K H U H W K H F O X W F K W K L F N Q H V V L V L Q G L F D W H G
7 K H G L I I H U H Q F H P X V W E H F D O F X O D W H G P D Q X D O O \ R Q O \ Z K H Q D O O R I W K H 6 1 $ 3 6 + 2 7 S D U D P H W H U V D U H U H D G • 7 K H F X U U H Q W F O X W F K W K L F N Q H V V L V V X S S O L H G R Q F K D Q Q H O
• 7 K H L Q L W L D O F O X W F K W K L F N Q H V V D W W K H W L P H R I D V V H P E O \ L V V X S S O L H G R Q F K D Q Q H O
7 K H G L I I H U H Q F H E H W Z H H Q W K H L Q L W L D O W K L F N Q H V V D Q G W K H F X U U H Q W W K L F N Q H V V P X V W Q H Y H U E H P R U H W K D Q mm.
, I W K H G L I I H U H Q F H L V P R U H W K D Q P P W K H F O X W F K L W V H O I P X V W E H L P P H G L D W H O \ U H S O D F H G
Page 346 of 1173
1
L824 01 42 06
Fig.2
Fig.1
Fig.3
F
E
BA
C
D
® Automobili Lamborghini S.p.A.
7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Clutch bleeding (E-Gear) 3 U H O L P L Q D U \ R S H U D W L R Q V •
Disassemble the engine safety cover (081303).
Clutch bleeding
1. Connect a pipe ( A-Fig.1) to the clutch bleeder ( B-Fig.2) located in the front part of the engine.
2. Place a container for collecting the used oil ( C-Fig.1) under the end of the pipe.
3. Open the clutch bleeder using the two nuts that secure it ( D-Fig.2) (tighten the lower nut and loosen the upper
nut).
4. Connect the OBD2 outlet ( E-Fig.3) to the port of the “LARA-AS” software system ( F-Fig.3) on the driver side
under the steering wheel
(109000).
To establish the connection between the control unit and the PC, use the BASIC.XScable and the BASIC.KS
cable (000200-48a) .
Use the / $ 5 $ $ 6 V \ V W H P 0 H D V X U H P H Q W ¿ O H ± F O X W F K E O H H G L Q J
5. 7 X U Q W K H Y H K L F O H ¶ V L J Q L W L R Q N H \ W R W K H ¿ U V W S R V L W L R Q V R W K D W H O H F W U L F D O S R Z H U D U U L Y H V D W W K H R X W O H W
6. Start the bleed process through the CPU, opening the circuit.
7. Keep the circuit open 10-15 seconds.
8. After 10-15 seconds stop the operation through the CPU.
9. Repeat the operation two more times (three times altogether), letting the oil drain from the pipe connected to
the bleeder.
10. : K H Q E O H H G L Q J K D V ¿ Q L V K H G U H V W R U H W K H L Q L W L D O F R Q G L W L R Q V