2009 JEEP LIBERTY cooling

[x] Cancel search: cooling

Page 397 of 506

JEEP LIBERTY 2009 KK / 2.G Owners Manual NOTE:There are steps that you can take to slow down
an impending overheat condition:
•If your air conditioner (A/C) is on, turn it off. The A/C
system adds heat to the engine cooling system and
turn

Page 404 of 506

JEEP LIBERTY 2009 KK / 2.G Owners Manual JUMP-STARTING
WARNING!
•Take care to avoid the radiator cooling fan when-
ever the hood is raised. It can start anytime the
ignition switch is on. You can be hurt by the fan.
•Do not attempt to pu

Page 410 of 506

JEEP LIBERTY 2009 KK / 2.G Owners Manual ▫Cooling System ..................... 423
▫ Brake System ....................... 429
▫ Automatic Transmission ............... 430
▫ Transfer Case ....................... 431
▫ Front/Rear Axl

Page 425 of 506

JEEP LIBERTY 2009 KK / 2.G Owners Manual To minimize the possibility of catalytic converter dam-
age:
•Do not shut off the engine or interrupt the ignition
when the transmission is in gear and the vehicle is in
motion.
•Do not try to sta

Page 426 of 506

JEEP LIBERTY 2009 KK / 2.G Owners Manual spraying water from a garden hose vertically down the
face of the A/C condenser (if equipped) or the back of the
radiator core.
Check the engine cooling system hoses for brittle rubber,
cracking, tear

Page 427 of 506

JEEP LIBERTY 2009 KK / 2.G Owners Manual CAUTION!
•Mixing of engine coolant (antifreeze) other than
specified HOAT engine coolant (antifreeze), may
result in engine damage and may decrease corro-
sion protection. If a non-HOAT engine coola

Page 428 of 506

JEEP LIBERTY 2009 KK / 2.G Owners Manual When adding engine coolant (antifreeze):
•The manufacturer recommends using MOPAR
Antifreeze/Coolant 5 Year/100,000 Mile Formula
HOAT (Hybrid Organic Additive Technology).
•Mix a minimum solution

Page 429 of 506

JEEP LIBERTY 2009 KK / 2.G Owners Manual WARNING!
•The warning words “DO NOT OPEN HOT” on
the cooling system pressure cap are a safety pre-
caution. Never add engine coolant (antifreeze)
when the engine is overheated. Do not loosen or
Page:   < prev 1-8 9-16 17-24 next >