2009 Hyundai Accent ECU

1FEATURES OF YOUR HYUNDAI
4
B880D01CM-DAT Limp Home Procedures
In case the immobiliser warning indica- tor blinks for five seconds when the ignition key is turned to "ON" position,this indicates that the immobiliser sys- tem is out of order. Should the immobiliser system be out of order,your vehicle will need to be towed to a Hyundai dealer for rectification.
In the interest of security, the metal tag attached to the keys which bears thekey number should be removed from the key ring after you receive your new vehicle. In addition, key numbers can-not be provided by Hyundai for security reasons. If you need additional keys or if youshould lose your keys, your authorised Hyundai dealer can make new keys if you can supply the key number.
B880C01MC-DAT Key Numbers
The vehicle key number is recorded upon a metal tag attached to the keys when the vehicle is first delivered toyou. The key number should be recorded and kept in a safe place in case theneed to order further keys arises. New keys are available from any Hyundai dealer by quoting the relevant keynumber.
OMC027002HNF2011

1
FEATURES OF YOUR HYUNDAI
5
!
DOOR LOCKS
B040A02Y-DAT
WARNING:
o Unlocked doors can be danger- ous. Before you drive away (espe- cially if there are children in the car), be sure that all the doors are securely closed and locked so that the doors cannot be inadvert- ently opened from the inside. This helps ensure that the doors will not be opened accidentally. Also, when combined with the proper use of seat belts, locking the doors helps keep occupants from being ejected from the car in case of an accident.
o Before opening the door, always
look for and avoid oncoming traffic.
o In case of an accident, all doors
will unlock automatically (If In- stalled).
OMC025005R B040C01MC-GAT Locking From the Outside The doors can be locked without a key. To lock the doors, first push the inside lock switch to the "LOCK" position sothat the red mark on the switch is not visible, then close the door.
B040B01A-AAT Locking and Unlocking Front Doors with a Key
o The door can be locked or unlocked
with a key.
o Lock the door by turning the key toward the front of the vehicle and unlock it by turning the key toward the rear.
UNLOCKLOCK
B040C04MCR

1
FEATURES OF YOUR HYUNDAI
17
B130A01A-AAT REAR SEAT ENTRY (3 Door)
The front passenger's seatback should be tilted to enter the rear seat. By pulling up on the recliner control lever (1) at the outside of the frontpassenger's seat, the seatback will tilt forward and the seat will automatically slide forward.Rear seat occupants can tilt the front passenger's seatback by depressing the foot lever (2) as shown in the illus-tration. HTB258-D
(1)
(2)
!WARNING:
Passengers sitting in the rear seat should be careful not to accidentallypress the foot lever (2) while the vehicle is moving, as this may cause the seatback to move forward andinjure a front seat occupant.
B085A01MC-GAT REAR SEAT Adjusting seatback angle (3 Door)
To recline the seatback, pull up the seatback folding lever (1) and push the seatback rearward. To return the seatback to an upright position, pull upthe seatback folding lever (1) and pull the seatback forward until the seatback locks into upright position.After adjusting the seatback angle, al- ways check that it is securely locked into place. B085A01MC
(1)
!WARNING:
Do not adjust the seatback angle while the vehicle is in motion.

1FEATURES OF YOUR HYUNDAI
24
!
To lower it, push it down while pressing the height adjuster button.Release the button to lock the anchor into position. Try sliding the height ad- juster to make sure that it has lockedinto the position. B180A01MC-GAT SEAT BELTS 3-Point System with Emergency Locking Retrac-torTo Fasten Your Belt To fasten your seat belt, pull it out of the retractor and insert the metal tab into the buckle. There will be an audible "click" when the tab locks into thebuckle. The seat belt automatically adjusts to the proper length only after the lap beltis adjusted manually so that it fits snugly around your hips. If you lean forward in a slow, easy motion, the beltwill extend and let you move around.
B180A01NF-E
o If the shoulder belt anchor is not
moved, grasp the shoulder part of the belt and pull forward to thefull.
WARNING:
o The height adjuster must be in the locked position when the vehicleis moving.
o The misadjustment of height of the shoulder belt could reduce theeffectiveness of the seat belt in acrash.
! CAUTION:
o Adjust the shoulder belt height when you sit well back in the seat.
OMC025042-1
o When adjusting the shoulder belt height, grip the height adjuster button securely and slide the height adjuster up or down.

1FEATURES OF YOUR HYUNDAI
28
!
CHILD RESTRAINT SYSTEM
!
B220C02A-DAT To Release the Seat Belt When you want to release the seat belt, press the button in the locking buckle.
WARNING:
When fastening the outboard seatbelts or the centre seat belt, make sure they are inserted into the cor-rect buckles to obtain maximum pro- tection from the seat belt system and assure proper operation.
B210A01NF
B220D05MC
o To disconnect the metal tab (A) from the buckle (B), insert a nar- row-ended tool into the groovelocated on the buckle (B).
o Lock the metal tab (A) and the
buckle (B) immediately after fold-ing rear seatbacks up. B230A03A-DAT If the child is old enough to sit alone and the car is not equipped with a proper child or infant seat, the child should be placed in the rear seat andrestained with a lap/sash belt. Child restraint systems are designed to be secured in vehicle seats by lap beltsor the lap belt portion of a lap/shoulder belt, or by a tether anchor and/or ISOFIX anchors (If Installed).
WARNING:
o Child restraint anchorages are designed to withstand only thoseloads imposed by correctly fittedchild restraints. Under no circum- stances are they to be used for adult seat belts harnesses or forattaching other items or equip- ment to the vehicle.
o Since a safety belt or child re- straint system can become veryhot if it is left in a closed vehicle, be sure and check the seat coverand buckles before placing a child there.

1
FEATURES OF YOUR HYUNDAI
29
B230B01E-DAT Using a Child Restraint System For small children and babies, the use of a child seat or infant seat is required. This child seat or infant seat should beof appropriate size for the child and should be installed in accordance with the manufacturer's instructions. It isfurther required that the seat be placed in the vehicle's rear seat since this can make an important contribution tosafety. Your vehicle is provided with three child restraint anchorage points for installing the child seat or infantseat. Child Restraint Hook Holder Spacer
B230B01NF
Attachment Bolt (5/16"-22 mm) Conical Spring Washer Child Restraint Hook Holder
o When the child restraint systemis not in use, store it in the boot or fasten it with a safety belt so that it will not be thrown forward in
the case of a sudden stop or acci-dent.
o A child restraint system should be
placed in the vehicle's rear seatsince this can make an important contribution to safety.
o Unrestrained children should not
be carried in the car. Holding achild in your arms is not a satis- factory substitute for a child re- straint system. A child held in this manner can be crushed be-tween your body and the interior of the car.
o Never allow a child to be held in
a person's arms while they are ina moving vehicle. This could result in serious in-jury or death to the child in the event of an accident or sudden stop. Holding a child in a movingvehicle does not offer protection during an accident, even if the person holding the child is wear-ing a seat belt. o Never use an infant carrier or child
safety seat that "hooks" over aseatback; it may not provide ad- equate security in an accident.
o Under all circumstances the at- taching bolt must be engaged atleast 5 full threads in the anchor- age. If you are in doubt with anyaspect of this installation please contact an authorised Hyundai dealer.
Retainer Washer

1FEATURES OF YOUR HYUNDAI
30
!
2. Route the child restraint seat strap
over the back of the seat. For vehicles with adjustable head- rests, route the tether strap underthe headrest and between the head- rest posts, otherwise route the tether strap over the top of the seatback. B230C02MC
B230C04A-DAT Installing a Child Restraint Seat (4 Door) Three Child Restraint Anchorage Fit- ting Packages are located on the rearseat package tray.
1. Open the tether anchor cover on the
rear seat package tray.
B230C01MC
WARNING:
Do not mount more than one child restraint to a single tether or to a child restraint lower anchorage point.The improper increased load may cause the anchorage points or tether anchor to break, causing seriousinjury or death.
B230C01A-D
3. Connect the attaching clip (2) to the Child Restraint Anchorage Fitting Package (1) and tighten to secure the seat. (1)
(2)

1
FEATURES OF YOUR HYUNDAI
31
!
2. Route the child restraint seat strap
over the back of the seat. For vehicles with adjustable head- rests, route the tether strap under theheadrest and between the headrest posts, otherwise route the tether strap over the top of the seatback.
B230E01MC-DAT Installing a Child Restraint Seat (3 Door) Three Child Restraint Anchorage Fit- ting Package are located on the rearfloor panel.
B230E01MC
1. Open the tether anchor cover on the rear floor panel.
B230C02MC
WARNING:
Do not mount more than one child restraint to a single tether or to a child restraint lower anchorage point.
The improper increased load may cause the anchorage points or tether anchor to break, causing seriousinjury or death.
3. Connect the attaching clip (2) to the
Child Restraint Anchorage Fitting Package (1) through the hole on the covering shelf and tighten to securethe seat.B230E01A-D (1)
(2)
Covering shelf