6(Low Speed):For steady
wiping at low speed, turn the band
away from you to the rst solid
position past the delay settings.
1(High Speed):For high-speed
wiping, turn the band to the
second solid position past the delay
settings.
9(Off):Move the band to off, to
stop the wipers.
Be sure to clear ice and snow from
the wiper blades before using
them. If they are frozen to the
windshield, carefully loosen or thaw
them. If the blades do become
worn or damaged, get new blades
or blade inserts.
Windshield wipers work in all power
modes, except when the ignition
is set to LOCK/OFF. After the
engine is turned off, wipers will work
in Retained Accessory Power
(RAP) mode until a door is opened.
SeeRetained Accessory Power
(RAP) on page 2-17.
Windshield Washer
L
(Washer Fluid):This feature is
located on the paddle marked
with
Lat the top of the
multifunction lever. Push the paddle
to spray washer uid on the
windshield. The wipers will clear the
window and then either stop or
return to the preset speed.
{CAUTION
In freezing weather, do not use
your washer until the windshield is
warmed. Otherwise the washer
uid can form ice on the
windshield, blocking your vision.
Rear Window
Wiper/Washer
For vehicles with this feature, the
knob is located on the instrument
panel below the climate controls.
Z(Rear Wiper):Turn to 1
for a slower wiping speed or to 2 for
a faster wiping speed.
0 (Off):Turn to 0 for off.
=(Washer Fluid):Press to wash
and wipe the window.
3-8 Instrument Panel
Climate Controls
Climate Control System
The heating, cooling, and ventilation of the vehicle can be controlled with this
system.
A. Temperature Control
B. Fan Control
C. Air Delivery Mode Control
D. Air Conditioning
E. Recirculation
F. Rear Window Defogger
9(Off):Turn the fan control to
this position to turn the fan off.
Air still enters the vehicle and
increases with vehicle speed
depending on the mode and
temperature settings. Turn on the
recirculation mode to stop this
air ow. Temperature Control:
Turn
clockwise or counterclockwise to
increase or decrease the
temperature of the air in the vehicle.
9(Fan Control): Turn clockwise
or counterclockwise to increase
or decrease the fan speed.
Air Delivery Mode Control: Turn
clockwise or counterclockwise
to change the direction of the air ow
in the vehicle. The air ow can be
set between modes.
To change the current mode, select
one of the following:
H(Vent): Air is directed to the
instrument panel outlets.
\(Bi-Level): Air is directed to the
instrument panel outlets, and the
remaining air to the oor outlets and
the defroster and side window
outlets. Cooler air is directed to the
upper outlets and warmer air to
the oor outlets.
Instrument Panel 3-19
