2009 HONDA CIVIC SEDAN ESP

This operation clears the HFL of
your passcode, your paired phones,
all names in the HFL phonebook,
and all imported phonebooks.
Clearing is recommended bef ore you
sell your vehicle.Press and release the Talk button.
Af ter the beep, say ‘‘Yes.’’
HFL responds ‘‘Preparing to clear
the system, which may take up to
two minutes to complete. To
proceed, press the Talk button and
say Continue, otherwise say Go
Back or Cancel.’’
After saying Continue, HFL
responds ‘‘Please wait while the
system is cleared.’’ HFL responds
‘‘The system has been cleared.’’
Press and release the Talk button.
Af ter the beep, say ‘‘System setup.’’
HFL responds ‘‘System setup
options are security, change
passcode, call notif ication, auto
transf er, and clear. Press the Talk
button and say a command.’’
Press and release the Talk button.
After the beep, say ‘‘Clear.’’
HFL responds ‘‘This process will
clear all paired phones, clear all
entries in the phonebook, clear the
security passcode, and restore the
defaults in the system setup. Is
this what you would like to do?’’
2. 4.
1.
3.
To clear the system, do this:
BluetoothHandsFreeL ink
Clearing the System
244
\f—\f—\fy
\fy
(#\fy\fy
2009 Civic Sedan

»¼
Canadian models only
All paired phones missing a French
name tag are recorded, the HFL
system returns to idle.
This process will also be required if
there are paired phones without
English tags when changing f rom
French to English. HFL responds
‘‘For the system to identif y phones
that were paired while in another
language, the phone names need to
be re-recorded.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Oui’’ or ‘‘Yes.’’
If there are no paired phones
without French name tags, HFL
responds ‘‘Veuillez attendre que le
système change de langue. Please
wait while the language is changed.’’
HFL responds ‘‘La langue a été
changée.’’
To change language, say a command
with the current selected language.
The f ollowing example is changing
the language f rom English to French.
If there are paired phones
without French name tags, the
f ollowing prompts will continue.
If there are paired phones without
French name tags, HFL responds
‘‘La langue a été changée. Pour que
le système identif ie les téléphones
qui ont été jumelés dans une autre
langue, les noms des téléphones
doivent etre ré-enregistrés.’’ Example f or changing name tags:
HFL responds ‘‘Quel est le nom
Français pour Paul’s phone ?’’
Press and release the Talk button.
Af ter the beep, say ‘‘Téléphone de
Paul.’’
Press and release the Talk button.
Af ter the beep, say ‘‘Change
language.’’
HFL responds ‘‘English or
French?’’
Press and release the Talk button.
Af ter the beep, say ‘‘French.’’
HFL responds ‘‘Vous avez
selectionné Français. Les noms
enregistres en mode Anglais ne
seron pas accessible en mode
Français. Voulez-vous continuer?
You have selected French. Name
tags that were stored while in
English mode will not be
accessible in f rench mode. Would
you like to continue? Press the
Talk button and say Yes or No.’’
2. 4.
1. 3.
BluetoothHandsFreeL ink
Changing L anguage
Features
245
NOTE:
\f—\f—\fy
\f\fy
(#\fy\f\fy
2009 Civic Sedan

Canadian models onlyTo select a language quickly, do thef ollowing. As required by the FCC:
This device complies with Part 15 of theFCC rules. Operation is subject to thef ollowing two conditions: (1) This devicemay not cause harmf ul interf erence, and(2) this device must accept anyinterf erence received, includinginterf erence that may cause undesiredoperation.
Changes or modif ications not expresslyapproved by the party responsible f orcompliance could void the user’sauthority to operate the equipment.
This device complies with IndustryCanada Standard RSS-210.Operation is subject to the f ollowing twoconditions: (1) this device may not causeinterf erence, and (2) this device mustaccept any interf erence that may causeundesired operation of the device.
Press and release the Talk button.
Af ter the beep, say ‘‘Anglais.’’
HFL responds ‘‘You have selected
English. Name tags that were
stored while in French mode will
not be accessible in English mode.
Would you like to continue? Press
the Talk button and say Yes or No.’’
For example, to change from French
to English.
If you want to continue, f ollow steps
3and4onpage .
1.
245
BluetoothHandsFreeL ink
Quick Language Selection
246
\f—\f—\fy
\f
y
(#\fy\f
y
2009 Civic Sedan

The vehicle stability assist (VSA)
system helps to stabilize the vehicle
during cornering if the vehicle turns
more or less than desired. It also
assists you in maintaining traction
while accelerating on loose or
slippery road surf aces. It does this
by regulating the engine’s output and
by selectively applying the brakes.
When VSA activates, you may notice
that the engine does not respond to
the accelerator in the same way it
does at other times. There may also
be some noise f rom the VSA
hydraulic system. You will also see
the VSA activation indicator blink.
The VSA system cannot enhance the
vehicle’s driving stability in all
situations and does not control your
vehicle’s entire braking system. It is
still your responsibility to drive and
corner at reasonable speeds and to
leave a sufficient margin of safety.When VSA activates, you will see the
VSA Activation indicator blinks.
If this indicator comes on while
driving, pull to the side of the road
when it is saf e, and turn of f the
engine. Reset the system by
restarting the engine. If the VSA
system indicator stays on or comes
back on while driving, have the VSA
system inspected by your dealer.
Without VSA, your vehicle will have
normal braking and cornering ability,
but it will not have VSA traction and
stability enhancement.
If the low tire pressure indicator or
TPMS indicator comes on, the VSA
system automatically turns on even if
the VSA system is turned of f by
pressing the VSA OFF switch (see
page ). If this happens, you
cannot turn the VSA system of f by
pressing the VSA OFF switch again.
If the indicator does not come on
when the ignition switch is turned to
the ON (II) position, there may be a
problem with the VSA system. Have
your dealer inspect your vehicle as
soon as possible.
The main f unction of the
VSA system is generally known as
Electronic Stability Control (ESC).
The system also includes a traction
control f unction. 279
On U.S. models
If equipped
VSA A ctivation Indicator
Vehicle Stability Assist
(VSA ) System Indicator
Vehicle Stability A ssist (VSA), aka Electronic Stability Control (ESC), System
278
NOTE:
\f—\f—
\fy\fy
(#\fy\fy
2009 Civic Sedan

As required by the FCC:This device complies with Part 15 of theFCC rules. Operation is subject to thef ollowing two conditions: (1) This devicemay not cause harmf ul interf erence, and(2) this device must accept anyinterf erence received, includinginterf erence that may cause undesiredoperation.
Changes or modif ications not expresslyapproved by the party responsible f orcompliance could void the user’sauthority to operate the equipment.
This device complies with IndustryCanada Standard RSS-210.Operation is subject to the f ollowing twoconditions: (1) this device may not causeinterf erence, and (2) this device mustaccept any interf erence that may causeundesired operation of the device.
If you have a f lat tire, the low tire
pressure indicator will come on.
Replace the flat tire with the
compact spare tire (see page ).
Each wheel (except the compact
sparetirewheel)isequippedwitha
tire pressure sensor mounted inside
the tire behind the valve stem. You
must use TPMS specif ic wheels. It is
recommended that you always have
your tires serviced by your dealer or
qualif ied technician.
After you replace the flat tire with
thecompactsparetire,thelowtire
pressure indicator stays on. This is
normal; the system is not monitoring
the spare tire pressure. Manually
check the spare tire pressure to be
sure it is correct. Af ter several miles
(kilometers) driving with the
compact spare tire, the TPMS
indicator comes on and the low tire
pressure indicator goes of f . The low tire pressure indicator or
the TPMS indicator will go off, after
several miles (kilometers) driving,
when you replace the spare tire with
the specif ied regular tire equipped
with the tire pressure monitor sensor.
Never use a puncture-repairing agent
in a f lat tire. If used, you will have to
replace the tire pressure sensor.
Havetheflattirerepairedbyyour
dealer as soon as possible.
336
Changing a T ire with T PMS
Tire Pressure Monitoring System (TPMS)
282
\f—\f—\fy

\fy
(#\fy\fy
2009 Civic Sedan

Look f or a blown wire inside the
f use. If it is blown, replace it with
oneof thesparefusesof thesame
rating or lower.If you cannot drive the vehicle
without f ixing the problem, and you
do not have a spare fuse, take a fuse
of the same rating or a lower rating
f rom one of the other circuits. Make
sureyoucandowithoutthatcircuit
temporarily (such as the accessory
power socket or radio).
If you replace the blown f use with a
spare f use that has a lower rating, it
might blow out again. This does not
indicate anything wrong. Replace the
f use with one of the correct rating as
soon as you can.
Your vehicle has spare fuses on the
back of the under-hood f use box
cover.
5.
Fuses
354
BLOWN
FUSE PULLER
SPARE FUSES
\f—\f—\fy
y
(#\fy\fy
2009 Civic Sedan

Warning: The temperature grade f or
this tire is established f or a tire that
is properly inf lated and not
overloaded. Excessive speed,
underinf lation, or excessive loading,
either separately or in combination,
can cause heat buildup and possible
tire f ailure.
The temperature grades are A (the
highest), B, and C, representing the
tire’s resistance to the generation of
heat and its ability to dissipate heat
when tested under controlled
conditions on a specif ied indoor
laboratory test wheel. Sustained high
temperature can cause the material
of the tire to degenerate and reduce
tire life, and excessive temperature
can lead to sudden tire f ailure. The
grade C corresponds to a level of
perf ormance which all passenger car
tires must meet under the Federal
Motor Vehicle Saf ety Standard No.
109. Grades B and A represent
higher levels of perf ormance on the
laboratory test wheel than the
minimum required by law.
Temperature
DOT Tire Quality Grading (U.S. Vehicles)
368
\f—\f—\fy
y
(#\fy\fy
2009 Civic Sedan

µ
Always check the TPMS malf unction
telltale af ter replacing one or more
tires or wheels on your vehicle to
ensure that the replacement or
alternate tires and wheels allow the
TPMS to continue to f unction
properly.
Your vehicle has also been equipped
with a TPMS malf unction indicator
to indicate when the system is not
operating properly. The TPMS
malf unction indicator is provided by
a separate telltale, which displays the
symbol ‘‘TPMS’’ when illuminated.
When the malf unction indicator is
illuminated,
the system may not be able to detect
or signal low tire pressure as
intended.
TPMS malf unctions may occur f or a
variety of reasons, including the
installation of replacement or
alternate tires or wheels on the
vehicle that prevent the TPMS f rom
f unctioning properly.
Driving on a signif icantly under-
inf lated tire causes the tire to
overheat and can lead to tire failure.
Under-inf lation also reduces f uel
efficiency and tire tread life, and may
af f ect the vehicle’s handling and
stopping ability.
Please note that the TPMS is not a
substitute for proper tire
maintenance, and it is the driver’s
responsibility to maintain correct tire
pressure, even if under-inf lation has
not reached the level to trigger
illumination of the TPMS low tire
pressure telltale.
Tire Pressure Monitoring System (TPMS) Required Federal Explanation
Technical Inf ormation
371
\f—\f—\fy

\fy
(#\fy\fy
2009 Civic Sedan