2009 GMC YUKON DENALI light

4. Enter the city name or touch the Last 5 Cities screen
button.
The Last 5 Cities screen will display a list of the last
ve city names that had been entered. Select a city
from the list and it will appear in the City name area.
If using the alpha keyboard, nish entering the city
name. If ve or less names are available, a list
will display. If more than ve are available, there will
be a screen button with a number in it, it represents
the number of available cities. Select this button
to view the list and select a city.
5. Once a city has been selected the Street name
category will automatically be selected for entry.
Start entering the street name. If ve or less names
are available, a list will display. If more than ve
are available, there will be a screen button with a
number in it, it represents the number of available
streets. Select this button to view the list.
6. Select the street name with the correct prex
(Dr., Ln, St., etc.) from the list.
7. Once a street has been selected, the numeric
keyboard will display, allowing you to enter the
house number. The system will display the house
number range that is available for the street.8. Select the Go screen button. The map screen,
with the destination marked, will display.
9. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
10. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.
To enter a destination by entering the street name rst,
do the following:
1. Press the DEST hard key.
2. Select the
6Address Entry screen button.
3. Select the Street screen button and start entering
the street name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available streets. Select this button
to view the list.
4. Select the street name with the correct prex from
the list (Dr., Ln., St., etc.).
2-17

5. Once a street has been selected the City name
category will automatically be selected for entry.
If ve or less cities are available for the selected
street, the system will display the list of cities.
If more than ve cities are available the system will
display the alpha keyboard. Start entering the
city name. If ve or less names are available,
a list will display. If more than ve are available,
there will be a screen button with a number in
it, it represents the number of available cities.
Select this button to view the list and select a city.
6. Once a city has been selected, the numeric
keyboard will display, allowing you to enter
the house number. The system will display the
house number range that is available for the street.
7. Select the Go screen button. The map screen, with
the destination marked, will display.
8. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
9. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.To enter a destination by entering a cross street, do the
following:
1. Press the DEST hard key.
2. Select the
6Address Entry screen button.
3. Select the Street screen button and start entering
the street name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available streets. Select this button
to view the list.
4. Select the desired street name with the correct
prex from the list (Dr., Ln., St., etc.).
5. Once a street has been selected the Cross Street
screen button will become available. Select the
Cross Street button and start entering the cross
street name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available cross streets. Select this button
to view the list.
2-18

6. Select the street name with the correct prex from
the list (Dr., Ln., St., etc.). An Information screen
will automatically display.
7. Select the Go screen button. The map screen,
with the destination marked, will display.
8. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
9. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.Point of Interest (POI)
The Point of Interest (POI) destination entry method
allows you to select a destination from the POI list.
iPoint of Interest:Touch this screen button to
access the Point of Interest (POI) screen. From this
screen you have two options to select/enter a
destination; enter the name using the alpha keyboard
or select a category from the category list.
2-19

To use the point of interest destination entry method by
entering the name, do the following:
1. Press the DEST hard key.
2. Select the
iPoint of Interest screen button.
3. Enter the POI name.
If ve or less names are available, a list will display.
If more than ve are available, there will be a
screen button with a number in it, it represents the
number of available POIs. Select this button to
view the list.
4. Select the Go screen button next to the POI.
The map screen, with the destination marked,
will display.
5. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
6. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.To use the point of interest destination entry method by
selecting a category, do the following:
1. Press the DEST hard key.
2. Select theiPoint of Interest screen button.
3. Select the Browse POI screen button to view the
list of POI categories.
4. Select a category, and then a sub-category.
The system will display available POI names in the
selected sub-category or if the list is too long the
system will display the alpha keyboard.
If the alpha keyboard is displayed, enter the POI
name until a list of available POIs appear. There is
a screen button with a number in it, it represents
the number of available POIs. Select this button to
view the list and select the POI.
5. Select the Go screen button next to the POI.
The map screen, with the destination marked,
will display.
6. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
7. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.
2-20

Address Book
The address book entry method allows you to select a
destination by selecting an address that has been
stored in your address book.
*Address Book:Touch this screen button to access
the Address Book screen. From this screen you can
select an address that already exists as the destination.To use the address book entry method, do the following:
1. Press the DEST hard key.
2. Select the
*Address Book screen button.
A list of your address book addresses will display.
3. Select the Go screen button next to the destination.
The map screen, with the destination marked, will
display.
4. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
See “Getting Started on Your Route” later in this
section for more information.
See “Adding Destinations to the Address Book”
later in this section.
2-21

Add Waypoint
Add Waypoint:Select this screen button from the
Route screen. This feature allows you to add up to
three waypoints to the current route, between your
start point and nal destination. Once a waypoint has
been added, the points can be edited or deleted.To add a waypoint:
1. Press the DEST hard key.
2. Select the Add Waypoint screen button. This button
will only appear if a route has been calculated.
3. Using the desired method of entering a destination,
enter the waypoint. See “Destination” previously for
more information.
4. Select the route preference (Fastest, Shortest,
or Other). The system will calculate and highlight
the route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
6. To add the second and third waypoints, press the
DEST hard key, then select the Add screen button,
where you would like the next waypoint to fall on
the route.
7. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
8. Select the Start Guidance screen button. You are
now ready to start your route.
2-27

To delete a waypoint from your current route:
1. Press the DEST hard key.
2. Select the Delete screen button for the desired
waypoint to delete.
3. The system will display a pop-up conrmation
message. Choose Yes to delete the waypoint;
touch No to cancel this operation.
4. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight the
route.
5. Select the Start Guidance screen button. You are
now ready to start your route.
Suspend Guidance
Press this screen button, from the Route screen, to put
the current route on hold.
Resume Guidance
Press this screen button, from the Route screen,
to resume guidance on the current route.
Cancel Guidance
Press this screen button, from the Route screen,
to cancel the current route.
Adding Destinations to the
Address Book
There are two ways to add a destination to the
address book:
To add the current nal destination to the address
book, press the Mark screen button from the map
screen. The system will automatically save the nal
destination information in the address book.
Press the Add to Address Book screen button
when available on POI information screens,
Destination Entry screens, or POI screens.
The system will automatically save this information
in the address book.
See “Nav” underConfigure Menu on page 2-30for
information on editing address book entries.
2-28

Three types of traffic information for major roadways are
displayed on the navigation system:
Unscheduled traffic incident data, such as accidents
and disabled vehicles
Scheduled traffic incident data, such as road
construction and road closures
Traffic ow information (rate of speed data)
Traffic information is delivered to the vehicle by the XM™
Radio satellites. XM NavTraffic™ makes it possible for
the navigation system to provide continuously updated
traffic information personalized for a driver’s needs.XM NavTraffic™ currently broadcasts the traffic
information for many markets nationally, and the
service may be available in more cities in the future.
Visit xmnavtraffic.com for more details on local
coverage.
A service fee is required in order to receive the
XM NavTraffic™ service.
Turning XM NavTraffic™ On and Off
To turn traffic on or off:
1. Press the Menu hard key, then press the Menu key
repeatedly until Nav is selected or press the
Nav screen button.
2. Touch the Traffic Options button.
3. Touch the Traffic button. This button is highlighted
when it is active.
Selecting Alert for Approaching Traffic Events
enables the system to show a pop-up screen that
noties of possible traffic issues ahead.
When this feature is highlighted, while traveling
on a route, accidents located on the route are
indicated and can be avoided.
2-36