2009 FORD EXPEDITION EL fold seats

[x] Cancel search: fold seats

Page 35 of 415

FORD EXPEDITION EL 2009  Owners Manual To search for specific RBDS music categories: When the desired
category appears in the display, press / to find the desired type,
then press and release SEEK, SEEK or press and hold SCAN to
begin the

Page 116 of 415

FORD EXPEDITION EL 2009  Owners Manual EXTERIOR MIRRORS
Power side view mirrors
The ignition can be in any position to adjust the power side view mirrors.
To adjust your mirrors:
1. Rotate the control clockwise to
adjust the right mirror a

Page 193 of 415

FORD EXPEDITION EL 2009  Owners Manual To install a filter:
• First, position the filter in its
housing making sure that the far
forward end is all the way up in
the housing. Then push in on the
center of the outside edge of the
filter a

Page 195 of 415

FORD EXPEDITION EL 2009  Owners Manual Placing the 2nd row outboard 40% seats in cargo mode
WARNING: Use caution when folding the seatback to the flat
back position as the system will move forward when you lift the
release handle.
The 2nd

Page 202 of 415

FORD EXPEDITION EL 2009  Owners Manual Folding down the 3rd row seats to the load floor
WARNING: To prevent possible damage to the seat or safety
belts, ensure that the safety belts are not buckled when moving
the seat to the load floor po

Page 203 of 415

FORD EXPEDITION EL 2009  Owners Manual Third row power folding seat (if equipped)
Note : Be sure that the head
restraints are folded down before
powering the 3rd row seat down.
The control buttons are located on
the right-hand rear quarter

Page 328 of 415

FORD EXPEDITION EL 2009  Owners Manual Fuse/Relay
Location Fuse Amp
Rating Protected Circuits
41 10A* TCM/PCM keep alive power
42 — Not used
43 15A* Brake on/off switch
44 20A* Fuel pump relay
45 25A* Trailer tow stop turn relay feed
46

Page 412 of 415

FORD EXPEDITION EL 2009  Owners Manual I
Ignition .......................282, 403–404
Illuminated visor mirror ...........108
Infant seats
(see Safety seats) .....................231
Inspection/maintenance (I/M)
testing .................