2009 FORD E SERIES engine

[x] Cancel search: engine

Page 245 of 321

FORD E SERIES 2009 4.G Owners Manual 4. Make the final connection of the negative (-) cable to an exposed
metal part of the stalled vehicle’s engine, away from the battery and the
carburetor/fuel injection system.Do notuse fuel lines,

Page 247 of 321

FORD E SERIES 2009 4.G Owners Manual 3. Remove the jumper cable from the positive (+) terminal of the booster
vehicle’s battery.
4. Remove the jumper cable from the positive (+) terminal of the
disabled vehicle’s battery.
After the d

Page 255 of 321

FORD E SERIES 2009 4.G Owners Manual FORD EXTENDED SERVICE PLAN
You can get more protection for your new car or light truck by
purchasing Ford Extended Service Plan (Ford ESP) coverage. It provides
the following:
•Benefits during the w

Page 260 of 321

FORD E SERIES 2009 4.G Owners Manual •Some automatic car washes may cause damage to the finish on your
wheel rims or covers. Chemical-strength cleaners, or cleaning
chemicals, in combination with brush agitation to remove brake dust
an

Page 264 of 321

FORD E SERIES 2009 4.G Owners Manual FORD AND LINCOLN MERCURY CAR CARE PRODUCTS
Your Ford or Lincoln Mercury authorized dealer has many quality
products available to clean your vehicle and protect its finishes. These
quality products hav

Page 265 of 321

FORD E SERIES 2009 4.G Owners Manual SERVICE RECOMMENDATIONS
To help you service your vehicle, we providescheduled maintenance
informationwhich makes tracking routine service easy.
If your vehicle requires professional service, your auth

Page 267 of 321

FORD E SERIES 2009 4.G Owners Manual IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT
Engine compartment component locations
Refer to the6.0 and 6.4 Liter Power Stroke Direct Injection Turbo
Diesel Owner’s Guide Supplementfor diesel en

Page 268 of 321

FORD E SERIES 2009 4.G Owners Manual WINDSHIELD WASHER FLUID
Add fluid to fill the reservoir if the
level is low. In very cold weather, do
not fill the reservoir completely.
Only use a washer fluid that meets
Ford specification WSB-M8B16